path: root/data/doc/manuals_generated/sisu_manual/sisu_commands/plain.txt

SISU - COMMANDS,
RALPH AMISSAH
*******************************

SISU COMMANDS
=============

1. COMMANDS SUMMARY
-------------------

1.1 SYNOPSIS
............

*SiSU* - Structured information, Serialized Units - a document publishing
system


sisu [ -abcDdFHhIiMmNnopqRrSsTtUuVvwXxYyZz0-9 ] [ filename/ wildcard ]


sisu [ -Ddcv ] [ instruction ]


sisu [ -CcFLSVvW ]


Note: commands should be issued from within the directory that contains the
marked up files, cd to markup directory.


1.2 DESCRIPTION
...............

*SiSU* *SiSU* is a document publishing system, that from a simple single
marked-up document, produces multiple of output formats including: plaintext,
html, LaTeX, pdf, xhtml, XML, info, and SQL (PostgreSQL and SQLite), which
share numbered text objects ("object citation numbering") and the same document
structure information. For more see: <http://www.jus.uio.no/sisu>


1.3 DOCUMENT PROCESSING COMMAND FLAGS
.....................................

*-a [filename/wildcard] *
produces plaintext with Unix linefeeds and without markup, (object numbers
are omitted), has footnotes at end of each paragraph that contains them [ -A
for equivalent dos (linefeed) output file] [see -e for endnotes]. (Options
include: --endnotes for endnotes --footnotes for footnotes at the end of each
paragraph --unix for unix linefeed (default) --msdos for msdos linefeed)


*-b [filename/wildcard] *
produces xhtml/XML output for browser viewing (sax parsing).


*-C [--init-site] *
configure/initialise shared output directory files initialize shared output
directory (config files such as css and dtd files are not updated if they
already exist unless modifier is used). -C --init-site configure/initialise
site more extensive than -C on its own, shared output directory files/force
update, existing shared output config files such as css and dtd files are
updated if this modifier is used.


*-CC *
configure/initialise shared output directory files initialize shared output
directory (config files such as css and dtd files are not updated if they
already exist unless modifier is used). The equivalent of: -C --init-site
configure/initialise site, more extensive than -C on its own, shared output
directory files/force update, existing shared output config files such as css
and dtd files are updated if -CC is used.


*-c [filename/wildcard] *
screen toggle ansi screen colour on or off depending on default set (unless
-c flag is used: if sisurc colour default is set to 'true', output to screen
will be with colour, if sisurc colour default is set to 'false' or is undefined
screen output will be without colour).


*-D [instruction] [filename] *
database postgresql ( --pgsql may be used instead) possible instructions,
include: --createdb; --create; --dropall; --import [filename]; --update
[filename]; --remove [filename]; see database section below.


*-d [--db-[database type (sqlite|pg)]] --[instruction] [filename] *
database type default set to sqlite, (for which --sqlite may be used instead)
or to specify another database --db-[pgsql, sqlite] (however see -D) possible
instructions include: --createdb; --create; --dropall; --import [filename];
--update [filename]; --remove [filename]; see database section below.


*-F [--webserv=webrick] *
generate examples of (naive) cgi search form for sqlite and pgsql depends on
your already having used sisu to populate an sqlite and/or pgsql database, (the
sqlite version scans the output directories for existing sisu_sqlite databases,
so it is first necessary to create them, before generating the search form) see
-d -D and the database section below. If the optional parameter
--webserv=webrick is passed, the cgi examples created will be set up to use the
default port set for use by the webrick server, (otherwise the port is left
blank and the system setting used, usually 80). The samples are dumped in the
present work directory which must be writable, (with screen instructions given
that they be copied to the cgi-bin directory). -Fv (in addition to the above)
provides some information on setting up hyperestraier for sisu


*-H [filename/wildcard] *
produces html without link suffixes (.html .pdf etc.) ("Hide"). Requires an
appropriately configured web server. [behaviour switched after 0.35 see -h].


*-h [filename/wildcard] *
produces html (with hardlinks i.e. with name suffixes in links/local urls).
html, with internal document links that include the document suffix, i.e.
whether it is .html or .pdf (required for browsing directly off a file system,
and works with most web servers). [behaviour switched after 0.35 see -H].


*-I [filename/wildcard] *
produces texinfo and info file, (view with pinfo).


*-L *
prints license information.


*-M [filename/wildcard/url] *
maintenance mode files created for processing preserved and their locations
indicated. (also see -V)


*-m [filename/wildcard/url] *
assumed for most other flags, creates new meta-markup file, (the metaverse )
that is used in all subsequent processing of other output. This step is assumed
for most processing flags. To skip it see -n


*-N [filename/wildcard/url] *
document digest or document content certificate ( DCC ) as md5 digest tree of
the document: the digest for the document, and digests for each object
contained within the document (together with information on software versions
that produced it) (digest.txt). -NV for verbose digest output to screen.


*-n [filename/wildcard/url] *
skip meta-markup (building of "metaverse"), this skips the equivalent of -m
which is otherwise assumed by most processing flags.


*-o [filename/wildcard/url] *
output basic document in opendocument file format (opendocument.odt).


*-p [filename/wildcard] *
produces LaTeX pdf (portrait.pdf & landscape.pdf). Default paper size is set
in config file, or document header, or provided with additional command line
parameter, e.g. --papersize-a4 preset sizes include: 'A4', U.S. 'letter' and
'legal' and book sizes 'A5' and 'B5' (system defaults to A4).


*-q [filename/wildcard] *
quiet less output to screen.


*-R [filename/wildcard] *
copies sisu output files to remote host using rsync. This requires that
sisurc.yml has been provided with information on hostname and username, and
that you have your "keys" and ssh agent in place. Note the behavior of rsync
different if -R is used with other flags from if used alone. Alone the rsync
--delete parameter is sent, useful for cleaning the remote directory (when -R
is used together with other flags, it is not). Also see -r


*-r [filename/wildcard] *
copies sisu output files to remote host using scp. This requires that
sisurc.yml has been provided with information on hostname and username, and
that you have your "keys" and ssh agent in place. Also see -R


*-S *
produces a sisupod a zipped sisu directory of markup files including sisu
markup source files and the directories local configuration file, images and
skins. Note: this only includes the configuration files or skins contained in
./_sisu not those in ~/.sisu -S [filename/wildcard] option. Note: (this option
is tested only with zsh).


*-S [filename/wildcard] *
produces a zipped file of the prepared document specified along with
associated images, by default named sisupod.zip they may alternatively be named
with the filename extension .ssp This provides a quick way of gathering the
relevant parts of a sisu document which can then for example be emailed. A
sisupod includes sisu markup source file, (along with associated documents if a
master file, or available in multilingual versions), together with related
images and skin. *SiSU* commands can be run directly against a sisupod
contained in a local directory, or provided as a url on a remote site. As there
is a security issue with skins provided by other users, they are not applied
unless the flag --trust or --trusted is added to the command instruction, it is
recommended that file that are not your own are treated as untrusted. The
directory structure of the unzipped file is understood by sisu, and sisu
commands can be run within it. Note: if you wish to send multiple files, it
quickly becomes more space efficient to zip the sisu markup directory, rather
than the individual files for sending). See the -S option without
[filename/wildcard].


*-s [filename/wildcard] *
copies sisu markup file to output directory.


*-t [filename/wildcard (*.termsheet.rb)] *
standard form document builder, preprocessing feature


*-U [filename/wildcard] *
prints url output list/map for the available processing flags options and
resulting files that could be requested, (can be used to get a list of
processing options in relation to a file, together with information on the
output that would be produced), -u provides url output mapping for those flags
requested for processing. The default assumes sisu_webrick is running and
provides webrick url mappings where appropriate, but these can be switched to
file system paths in sisurc.yml


*-u [filename/wildcard] *
provides url mapping of output files for the flags requested for processing,
also see -U


*-V *
on its own, provides *SiSU* version and environment information (sisu --help
env)


*-V [filename/wildcard] *
even more verbose than the -v flag. (also see -M)


*-v *
on its own, provides *SiSU* version information


*-v [filename/wildcard] *
provides verbose output of what is being built, where it is being built (and
error messages if any), as with -u flag provides a url mapping of files created
for each of the processing flag requests. See also -V


*-W *
starts ruby's webrick webserver points at sisu output directories, the
default port is set to 8081 and can be changed in the resource configuration
files. [tip: the webrick server requires link suffixes, so html output should
be created using the -h option rather than -H; also, note -F webrick ].


*-w [filename/wildcard] *
produces concordance (wordmap) a rudimentary index of all the words in a
document. (Concordance files are not generated for documents of over 260,000
words unless this limit is increased in the file sisurc.yml)


*-X [filename/wildcard] *
produces XML output with deep document structure, in the nature of dom.


*-x [filename/wildcard] *
produces XML output shallow structure (sax parsing).


*-Y [filename/wildcard] *
produces a short sitemap entry for the document, based on html output and the
sisu_manifest. --sitemaps generates/updates the sitemap index of existing
sitemaps. (Experimental, [g,y,m announcement this week])


*-y [filename/wildcard] *
produces an html summary of output generated (hyperlinked to content) and
document specific metadata (sisu_manifest.html). This step is assumed for most
processing flags.


*-Z [filename/wildcard] *
Zap, if used with other processing flags deletes output files of the type
about to be processed, prior to processing. If -Z is used as the lone
processing related flag (or in conjunction with a combination of -[mMvVq]),
will remove the related document output directory.


*-z [filename/wildcard] *
produces php (zend) [this feature is disabled for the time being]


2. COMMAND LINE MODIFIERS
-------------------------

*--no-ocn *
[with -h -H or -p] switches off object citation numbering. Produce output
without identifying numbers in margins of html or LaTeX/pdf output.


*--no-annotate *
strips output text of editor endnotes[^*1] denoted by asterisk or dagger/plus
sign


- [*1]: square brackets

*--no-asterisk *
strips output text of editor endnotes[^*2] denoted by asterisk sign


- [*2]: square brackets

*--no-dagger *
strips output text of editor endnotes[^+1] denoted by dagger/plus sign


- [+1]: square brackets

3. DATABASE COMMANDS
--------------------

dbi - database interface


-D or --pgsql set for postgresql -d or --sqlite default set for sqlite -d is
modifiable with --db=[database type (pgsql or sqlite)]


*-Dv --createall *
initial step, creates required relations (tables, indexes) in existing
postgresql database (a database should be created manually and given the same
name as working directory, as requested) (rb.dbi) [ -dv --createall sqlite
equivalent] it may be necessary to run sisu -Dv --createdb initially NOTE: at
the present time for postgresql it may be necessary to manually create the
database. The command would be 'createdb [database name]' where database name
would be SiSU_[present working directory name (without path)]. Please use only
alphanumerics and underscores.


*-Dv --import *
[filename/wildcard] imports data specified to postgresql db (rb.dbi) [ -dv
--import sqlite equivalent]


*-Dv --update *
[filename/wildcard] updates/imports specified data to postgresql db (rb.dbi)
[ -dv --update sqlite equivalent]


*-D --remove *
[filename/wildcard] removes specified data to postgresql db (rb.dbi) [ -d
--remove sqlite equivalent]


*-D --dropall *
kills data" and drops (postgresql or sqlite) db, tables & indexes [ -d
--dropall sqlite equivalent]


The v in e.g. -Dv is for verbose output.


4. SHORTCUTS, SHORTHAND FOR MULTIPLE FLAGS
------------------------------------------

*--update [filename/wildcard] *
Checks existing file output and runs the flags required to update this
output. This means that if only html and pdf output was requested on previous
runs, only the -hp files will be applied, and only these will be generated this
time, together with the summary. This can be very convenient, if you offer
different outputs of different files, and just want to do the same again.


*-0 to -5 [filename or wildcard] *
Default shorthand mappings (note that the defaults can be changed/configured
in the sisurc.yml file):


*-0 *
-mNhwpAobxXyYv [this is the default action run when no options are give, i.e.
on 'sisu [filename]']


*-1 *
-mNHwpy


*-2 *
-mNHwpaoy


*-3 *
-mNhwpAobxXyY


*-4 *
-mNhwpAobxXDyY --import


*-5 *
-mNhwpAobxXDyY --update


add -v for verbose mode and -c for color, e.g. sisu -2vc [filename or wildcard]


consider -u for appended url info or -v for verbose output


4.0.1 COMMAND LINE WITH FLAGS - BATCH PROCESSING
................................................

In the data directory run sisu -mh filename or wildcard eg. "sisu -h cisg.sst"
or "sisu -h *.{sst,ssm}" to produce html version of all documents.


Running sisu (alone without any flags, filenames or wildcards) brings up the
interactive help, as does any sisu command that is not recognised. Enter to
escape.


DOCUMENT INFORMATION (METADATA)
*******************************

METADATA
--------

Document Manifest @
<http://www.jus.uio.no/sisu/sisu_manual/sisu_commands/sisu_manifest.html>


*Dublin Core* (DC)


/DC tags included with this document are provided here./


DC Title: _SiSU - Commands_


DC Creator: _Ralph Amissah_


DC Rights: _Copyright (C) Ralph Amissah 2007, part of SiSU documentation,
License GPL 3_


DC Type: _information_


DC Date created: _2002-08-28_


DC Date issued: _2002-08-28_


DC Date available: _2002-08-28_


DC Date modified: _2007-09-16_


DC Date: _2007-09-16_


*Version Information*


Sourcefile: _sisu_commands.sst_


Filetype: _SiSU text 0.58_


Sourcefile Digest, MD5(sisu_commands.sst)= _68a4087f984baffbea779da25e1b6141_


Skin_Digest:
MD5(/home/ralph/grotto/theatre/dbld/builds/sisu/sisu/data/doc/sisu/sisu_markup_samples/sisu_manual/_sisu/skin/doc/skin_sisu_manual.rb)=
_20fc43cf3eb6590bc3399a1aef65c5a9_


*Generated*


Document (metaverse) last generated: _Tue Sep 25 02:53:05 +0100 2007_


Generated by: _SiSU_ _0.59.1_ of 2007w39/2 (2007-09-25)


Ruby version: _ ruby 1.8.6 (2007-06-07 patchlevel 36) [i486-linux]_



==============================================================================

	title:  SiSU - Commands

	creator:  Ralph Amissah

	rights:  Copyright (C) Ralph Amissah 2007, part of SiSU documentation,
               License GPL 3

	type:  information

	subject:  ebook, epublishing, electronic book, electronic publishing,
               electronic document, electronic citation, data structure,
               citation systems, search

	date.created:  2002-08-28

	date.issued:  2002-08-28

	date.available:  2002-08-28

	date.modified:  2007-09-16

	date:  2007-09-16





==============================================================================
nil

Other versions of this document:
manifest:
   http://www.jus.uio.no/sisu/sisu_commands/sisu_manifest.html
html:
   http://www.jus.uio.no/sisu/sisu_commands/toc.html
pdf:
   http://www.jus.uio.no/sisu/sisu_commands/portrait.pdf
   http://www.jus.uio.no/sisu/sisu_commands/landscape.pdf
plaintext (plain text):
   http://www.jus.uio.no/sisu/sisu_commands/plain.txt
at:
   http://www.jus.uio.no/sisu
* Generated by: SiSU 0.59.1 of 2007w39/2 (2007-09-25)
* Ruby version: ruby 1.8.6 (2007-06-07 patchlevel 36) [i486-linux]
* Last Generated on: Tue Sep 25 02:53:05 +0100 2007
* SiSU http://www.jus.uio.no/sisu