diff options
Diffstat (limited to 'sundry/spine_search_cgi/src/ext_depends_cgi/d2sqlite3/source/d2sqlite3/sqlite3.d')
-rw-r--r-- | sundry/spine_search_cgi/src/ext_depends_cgi/d2sqlite3/source/d2sqlite3/sqlite3.d | 11437 |
1 files changed, 0 insertions, 11437 deletions
diff --git a/sundry/spine_search_cgi/src/ext_depends_cgi/d2sqlite3/source/d2sqlite3/sqlite3.d b/sundry/spine_search_cgi/src/ext_depends_cgi/d2sqlite3/source/d2sqlite3/sqlite3.d deleted file mode 100644 index 4b528a7..0000000 --- a/sundry/spine_search_cgi/src/ext_depends_cgi/d2sqlite3/source/d2sqlite3/sqlite3.d +++ /dev/null @@ -1,11437 +0,0 @@ -/++ Auto-generated C API bindings. +/ -/* -** 2001-09-15 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: -** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. -** -************************************************************************* -** This header file defines the interface that the SQLite library -** presents to client programs. If a C-function, structure, datatype, -** or constant definition does not appear in this file, then it is -** not a published API of SQLite, is subject to change without -** notice, and should not be referenced by programs that use SQLite. -** -** Some of the definitions that are in this file are marked as -** "experimental". Experimental interfaces are normally new -** features recently added to SQLite. We do not anticipate changes -** to experimental interfaces but reserve the right to make minor changes -** if experience from use "in the wild" suggest such changes are prudent. -** -** The official C-language API documentation for SQLite is derived -** from comments in this file. This file is the authoritative source -** on how SQLite interfaces are supposed to operate. -** -** The name of this file under configuration management is "sqlite.h.in". -** The makefile makes some minor changes to this file (such as inserting -** the version number) and changes its name to "sqlite3.h" as -** part of the build process. -*/ - -module d2sqlite3.sqlite3; - -import core.stdc.config; -import core.stdc.stdarg; - -extern (C): -nothrow: -@nogc: - -/* Needed for the definition of va_list */ - -/* -** Make sure we can call this stuff from C++. -*/ - -/* -** Provide the ability to override linkage features of the interface. -*/ - -/* -** These no-op macros are used in front of interfaces to mark those -** interfaces as either deprecated or experimental. New applications -** should not use deprecated interfaces - they are supported for backwards -** compatibility only. Application writers should be aware that -** experimental interfaces are subject to change in point releases. -** -** These macros used to resolve to various kinds of compiler magic that -** would generate warning messages when they were used. But that -** compiler magic ended up generating such a flurry of bug reports -** that we have taken it all out and gone back to using simple -** noop macros. -*/ - -/* -** Ensure these symbols were not defined by some previous header file. -*/ - -/* -** CAPI3REF: Compile-Time Library Version Numbers -** -** ^(The [SQLITE_VERSION] C preprocessor macro in the sqlite3.h header -** evaluates to a string literal that is the SQLite version in the -** format "X.Y.Z" where X is the major version number (always 3 for -** SQLite3) and Y is the minor version number and Z is the release number.)^ -** ^(The [SQLITE_VERSION_NUMBER] C preprocessor macro resolves to an integer -** with the value (X*1000000 + Y*1000 + Z) where X, Y, and Z are the same -** numbers used in [SQLITE_VERSION].)^ -** The SQLITE_VERSION_NUMBER for any given release of SQLite will also -** be larger than the release from which it is derived. Either Y will -** be held constant and Z will be incremented or else Y will be incremented -** and Z will be reset to zero. -** -** Since [version 3.6.18] ([dateof:3.6.18]), -** SQLite source code has been stored in the -** <a href="http://www.fossil-scm.org/">Fossil configuration management -** system</a>. ^The SQLITE_SOURCE_ID macro evaluates to -** a string which identifies a particular check-in of SQLite -** within its configuration management system. ^The SQLITE_SOURCE_ID -** string contains the date and time of the check-in (UTC) and a SHA1 -** or SHA3-256 hash of the entire source tree. If the source code has -** been edited in any way since it was last checked in, then the last -** four hexadecimal digits of the hash may be modified. -** -** See also: [sqlite3_libversion()], -** [sqlite3_libversion_number()], [sqlite3_sourceid()], -** [sqlite_version()] and [sqlite_source_id()]. -*/ -enum SQLITE_VERSION = "3.25.3"; -enum SQLITE_VERSION_NUMBER = 3025003; -enum SQLITE_SOURCE_ID = "2018-11-05 20:37:38 89e099fbe5e13c33e683bef07361231ca525b88f7907be7092058007b75036f2"; - -/* -** CAPI3REF: Run-Time Library Version Numbers -** KEYWORDS: sqlite3_version sqlite3_sourceid -** -** These interfaces provide the same information as the [SQLITE_VERSION], -** [SQLITE_VERSION_NUMBER], and [SQLITE_SOURCE_ID] C preprocessor macros -** but are associated with the library instead of the header file. ^(Cautious -** programmers might include assert() statements in their application to -** verify that values returned by these interfaces match the macros in -** the header, and thus ensure that the application is -** compiled with matching library and header files. -** -** <blockquote><pre> -** assert( sqlite3_libversion_number()==SQLITE_VERSION_NUMBER ); -** assert( strncmp(sqlite3_sourceid(),SQLITE_SOURCE_ID,80)==0 ); -** assert( strcmp(sqlite3_libversion(),SQLITE_VERSION)==0 ); -** </pre></blockquote>)^ -** -** ^The sqlite3_version[] string constant contains the text of [SQLITE_VERSION] -** macro. ^The sqlite3_libversion() function returns a pointer to the -** to the sqlite3_version[] string constant. The sqlite3_libversion() -** function is provided for use in DLLs since DLL users usually do not have -** direct access to string constants within the DLL. ^The -** sqlite3_libversion_number() function returns an integer equal to -** [SQLITE_VERSION_NUMBER]. ^(The sqlite3_sourceid() function returns -** a pointer to a string constant whose value is the same as the -** [SQLITE_SOURCE_ID] C preprocessor macro. Except if SQLite is built -** using an edited copy of [the amalgamation], then the last four characters -** of the hash might be different from [SQLITE_SOURCE_ID].)^ -** -** See also: [sqlite_version()] and [sqlite_source_id()]. -*/ -extern __gshared const(char)[] sqlite3_version; -const(char)* sqlite3_libversion(); -const(char)* sqlite3_sourceid(); -int sqlite3_libversion_number(); - -/* -** CAPI3REF: Run-Time Library Compilation Options Diagnostics -** -** ^The sqlite3_compileoption_used() function returns 0 or 1 -** indicating whether the specified option was defined at -** compile time. ^The SQLITE_ prefix may be omitted from the -** option name passed to sqlite3_compileoption_used(). -** -** ^The sqlite3_compileoption_get() function allows iterating -** over the list of options that were defined at compile time by -** returning the N-th compile time option string. ^If N is out of range, -** sqlite3_compileoption_get() returns a NULL pointer. ^The SQLITE_ -** prefix is omitted from any strings returned by -** sqlite3_compileoption_get(). -** -** ^Support for the diagnostic functions sqlite3_compileoption_used() -** and sqlite3_compileoption_get() may be omitted by specifying the -** [SQLITE_OMIT_COMPILEOPTION_DIAGS] option at compile time. -** -** See also: SQL functions [sqlite_compileoption_used()] and -** [sqlite_compileoption_get()] and the [compile_options pragma]. -*/ - -int sqlite3_compileoption_used(const(char)* zOptName); -const(char)* sqlite3_compileoption_get(int N); - -/* -** CAPI3REF: Test To See If The Library Is Threadsafe -** -** ^The sqlite3_threadsafe() function returns zero if and only if -** SQLite was compiled with mutexing code omitted due to the -** [SQLITE_THREADSAFE] compile-time option being set to 0. -** -** SQLite can be compiled with or without mutexes. When -** the [SQLITE_THREADSAFE] C preprocessor macro is 1 or 2, mutexes -** are enabled and SQLite is threadsafe. When the -** [SQLITE_THREADSAFE] macro is 0, -** the mutexes are omitted. Without the mutexes, it is not safe -** to use SQLite concurrently from more than one thread. -** -** Enabling mutexes incurs a measurable performance penalty. -** So if speed is of utmost importance, it makes sense to disable -** the mutexes. But for maximum safety, mutexes should be enabled. -** ^The default behavior is for mutexes to be enabled. -** -** This interface can be used by an application to make sure that the -** version of SQLite that it is linking against was compiled with -** the desired setting of the [SQLITE_THREADSAFE] macro. -** -** This interface only reports on the compile-time mutex setting -** of the [SQLITE_THREADSAFE] flag. If SQLite is compiled with -** SQLITE_THREADSAFE=1 or =2 then mutexes are enabled by default but -** can be fully or partially disabled using a call to [sqlite3_config()] -** with the verbs [SQLITE_CONFIG_SINGLETHREAD], [SQLITE_CONFIG_MULTITHREAD], -** or [SQLITE_CONFIG_SERIALIZED]. ^(The return value of the -** sqlite3_threadsafe() function shows only the compile-time setting of -** thread safety, not any run-time changes to that setting made by -** sqlite3_config(). In other words, the return value from sqlite3_threadsafe() -** is unchanged by calls to sqlite3_config().)^ -** -** See the [threading mode] documentation for additional information. -*/ -int sqlite3_threadsafe(); - -/* -** CAPI3REF: Database Connection Handle -** KEYWORDS: {database connection} {database connections} -** -** Each open SQLite database is represented by a pointer to an instance of -** the opaque structure named "sqlite3". It is useful to think of an sqlite3 -** pointer as an object. The [sqlite3_open()], [sqlite3_open16()], and -** [sqlite3_open_v2()] interfaces are its constructors, and [sqlite3_close()] -** and [sqlite3_close_v2()] are its destructors. There are many other -** interfaces (such as -** [sqlite3_prepare_v2()], [sqlite3_create_function()], and -** [sqlite3_busy_timeout()] to name but three) that are methods on an -** sqlite3 object. -*/ -struct sqlite3; - -/* -** CAPI3REF: 64-Bit Integer Types -** KEYWORDS: sqlite_int64 sqlite_uint64 -** -** Because there is no cross-platform way to specify 64-bit integer types -** SQLite includes typedefs for 64-bit signed and unsigned integers. -** -** The sqlite3_int64 and sqlite3_uint64 are the preferred type definitions. -** The sqlite_int64 and sqlite_uint64 types are supported for backwards -** compatibility only. -** -** ^The sqlite3_int64 and sqlite_int64 types can store integer values -** between -9223372036854775808 and +9223372036854775807 inclusive. ^The -** sqlite3_uint64 and sqlite_uint64 types can store integer values -** between 0 and +18446744073709551615 inclusive. -*/ - -alias sqlite_int64 = long; -alias sqlite_uint64 = ulong; - -alias sqlite3_int64 = long; -alias sqlite3_uint64 = ulong; - -/* -** If compiling for a processor that lacks floating point support, -** substitute integer for floating-point. -*/ - -/* -** CAPI3REF: Closing A Database Connection -** DESTRUCTOR: sqlite3 -** -** ^The sqlite3_close() and sqlite3_close_v2() routines are destructors -** for the [sqlite3] object. -** ^Calls to sqlite3_close() and sqlite3_close_v2() return [SQLITE_OK] if -** the [sqlite3] object is successfully destroyed and all associated -** resources are deallocated. -** -** ^If the database connection is associated with unfinalized prepared -** statements or unfinished sqlite3_backup objects then sqlite3_close() -** will leave the database connection open and return [SQLITE_BUSY]. -** ^If sqlite3_close_v2() is called with unfinalized prepared statements -** and/or unfinished sqlite3_backups, then the database connection becomes -** an unusable "zombie" which will automatically be deallocated when the -** last prepared statement is finalized or the last sqlite3_backup is -** finished. The sqlite3_close_v2() interface is intended for use with -** host languages that are garbage collected, and where the order in which -** destructors are called is arbitrary. -** -** Applications should [sqlite3_finalize | finalize] all [prepared statements], -** [sqlite3_blob_close | close] all [BLOB handles], and -** [sqlite3_backup_finish | finish] all [sqlite3_backup] objects associated -** with the [sqlite3] object prior to attempting to close the object. ^If -** sqlite3_close_v2() is called on a [database connection] that still has -** outstanding [prepared statements], [BLOB handles], and/or -** [sqlite3_backup] objects then it returns [SQLITE_OK] and the deallocation -** of resources is deferred until all [prepared statements], [BLOB handles], -** and [sqlite3_backup] objects are also destroyed. -** -** ^If an [sqlite3] object is destroyed while a transaction is open, -** the transaction is automatically rolled back. -** -** The C parameter to [sqlite3_close(C)] and [sqlite3_close_v2(C)] -** must be either a NULL -** pointer or an [sqlite3] object pointer obtained -** from [sqlite3_open()], [sqlite3_open16()], or -** [sqlite3_open_v2()], and not previously closed. -** ^Calling sqlite3_close() or sqlite3_close_v2() with a NULL pointer -** argument is a harmless no-op. -*/ -int sqlite3_close(sqlite3*); -int sqlite3_close_v2(sqlite3*); - -/* -** The type for a callback function. -** This is legacy and deprecated. It is included for historical -** compatibility and is not documented. -*/ -alias sqlite3_callback = int function(void*, int, char**, char**); - -/* -** CAPI3REF: One-Step Query Execution Interface -** METHOD: sqlite3 -** -** The sqlite3_exec() interface is a convenience wrapper around -** [sqlite3_prepare_v2()], [sqlite3_step()], and [sqlite3_finalize()], -** that allows an application to run multiple statements of SQL -** without having to use a lot of C code. -** -** ^The sqlite3_exec() interface runs zero or more UTF-8 encoded, -** semicolon-separate SQL statements passed into its 2nd argument, -** in the context of the [database connection] passed in as its 1st -** argument. ^If the callback function of the 3rd argument to -** sqlite3_exec() is not NULL, then it is invoked for each result row -** coming out of the evaluated SQL statements. ^The 4th argument to -** sqlite3_exec() is relayed through to the 1st argument of each -** callback invocation. ^If the callback pointer to sqlite3_exec() -** is NULL, then no callback is ever invoked and result rows are -** ignored. -** -** ^If an error occurs while evaluating the SQL statements passed into -** sqlite3_exec(), then execution of the current statement stops and -** subsequent statements are skipped. ^If the 5th parameter to sqlite3_exec() -** is not NULL then any error message is written into memory obtained -** from [sqlite3_malloc()] and passed back through the 5th parameter. -** To avoid memory leaks, the application should invoke [sqlite3_free()] -** on error message strings returned through the 5th parameter of -** sqlite3_exec() after the error message string is no longer needed. -** ^If the 5th parameter to sqlite3_exec() is not NULL and no errors -** occur, then sqlite3_exec() sets the pointer in its 5th parameter to -** NULL before returning. -** -** ^If an sqlite3_exec() callback returns non-zero, the sqlite3_exec() -** routine returns SQLITE_ABORT without invoking the callback again and -** without running any subsequent SQL statements. -** -** ^The 2nd argument to the sqlite3_exec() callback function is the -** number of columns in the result. ^The 3rd argument to the sqlite3_exec() -** callback is an array of pointers to strings obtained as if from -** [sqlite3_column_text()], one for each column. ^If an element of a -** result row is NULL then the corresponding string pointer for the -** sqlite3_exec() callback is a NULL pointer. ^The 4th argument to the -** sqlite3_exec() callback is an array of pointers to strings where each -** entry represents the name of corresponding result column as obtained -** from [sqlite3_column_name()]. -** -** ^If the 2nd parameter to sqlite3_exec() is a NULL pointer, a pointer -** to an empty string, or a pointer that contains only whitespace and/or -** SQL comments, then no SQL statements are evaluated and the database -** is not changed. -** -** Restrictions: -** -** <ul> -** <li> The application must ensure that the 1st parameter to sqlite3_exec() -** is a valid and open [database connection]. -** <li> The application must not close the [database connection] specified by -** the 1st parameter to sqlite3_exec() while sqlite3_exec() is running. -** <li> The application must not modify the SQL statement text passed into -** the 2nd parameter of sqlite3_exec() while sqlite3_exec() is running. -** </ul> -*/ -/* An open database */ -/* SQL to be evaluated */ -/* Callback function */ -/* 1st argument to callback */ -/* Error msg written here */ -int sqlite3_exec( - sqlite3*, - const(char)* sql, - int function(void*, int, char**, char**) callback, - void*, - char** errmsg); - -/* -** CAPI3REF: Result Codes -** KEYWORDS: {result code definitions} -** -** Many SQLite functions return an integer result code from the set shown -** here in order to indicate success or failure. -** -** New error codes may be added in future versions of SQLite. -** -** See also: [extended result code definitions] -*/ -enum SQLITE_OK = 0; /* Successful result */ -/* beginning-of-error-codes */ -enum SQLITE_ERROR = 1; /* Generic error */ -enum SQLITE_INTERNAL = 2; /* Internal logic error in SQLite */ -enum SQLITE_PERM = 3; /* Access permission denied */ -enum SQLITE_ABORT = 4; /* Callback routine requested an abort */ -enum SQLITE_BUSY = 5; /* The database file is locked */ -enum SQLITE_LOCKED = 6; /* A table in the database is locked */ -enum SQLITE_NOMEM = 7; /* A malloc() failed */ -enum SQLITE_READONLY = 8; /* Attempt to write a readonly database */ -enum SQLITE_INTERRUPT = 9; /* Operation terminated by sqlite3_interrupt()*/ -enum SQLITE_IOERR = 10; /* Some kind of disk I/O error occurred */ -enum SQLITE_CORRUPT = 11; /* The database disk image is malformed */ -enum SQLITE_NOTFOUND = 12; /* Unknown opcode in sqlite3_file_control() */ -enum SQLITE_FULL = 13; /* Insertion failed because database is full */ -enum SQLITE_CANTOPEN = 14; /* Unable to open the database file */ -enum SQLITE_PROTOCOL = 15; /* Database lock protocol error */ -enum SQLITE_EMPTY = 16; /* Internal use only */ -enum SQLITE_SCHEMA = 17; /* The database schema changed */ -enum SQLITE_TOOBIG = 18; /* String or BLOB exceeds size limit */ -enum SQLITE_CONSTRAINT = 19; /* Abort due to constraint violation */ -enum SQLITE_MISMATCH = 20; /* Data type mismatch */ -enum SQLITE_MISUSE = 21; /* Library used incorrectly */ -enum SQLITE_NOLFS = 22; /* Uses OS features not supported on host */ -enum SQLITE_AUTH = 23; /* Authorization denied */ -enum SQLITE_FORMAT = 24; /* Not used */ -enum SQLITE_RANGE = 25; /* 2nd parameter to sqlite3_bind out of range */ -enum SQLITE_NOTADB = 26; /* File opened that is not a database file */ -enum SQLITE_NOTICE = 27; /* Notifications from sqlite3_log() */ -enum SQLITE_WARNING = 28; /* Warnings from sqlite3_log() */ -enum SQLITE_ROW = 100; /* sqlite3_step() has another row ready */ -enum SQLITE_DONE = 101; /* sqlite3_step() has finished executing */ -/* end-of-error-codes */ - -/* -** CAPI3REF: Extended Result Codes -** KEYWORDS: {extended result code definitions} -** -** In its default configuration, SQLite API routines return one of 30 integer -** [result codes]. However, experience has shown that many of -** these result codes are too coarse-grained. They do not provide as -** much information about problems as programmers might like. In an effort to -** address this, newer versions of SQLite (version 3.3.8 [dateof:3.3.8] -** and later) include -** support for additional result codes that provide more detailed information -** about errors. These [extended result codes] are enabled or disabled -** on a per database connection basis using the -** [sqlite3_extended_result_codes()] API. Or, the extended code for -** the most recent error can be obtained using -** [sqlite3_extended_errcode()]. -*/ -enum SQLITE_ERROR_MISSING_COLLSEQ = SQLITE_ERROR | (1 << 8); -enum SQLITE_ERROR_RETRY = SQLITE_ERROR | (2 << 8); -enum SQLITE_ERROR_SNAPSHOT = SQLITE_ERROR | (3 << 8); -enum SQLITE_IOERR_READ = SQLITE_IOERR | (1 << 8); -enum SQLITE_IOERR_SHORT_READ = SQLITE_IOERR | (2 << 8); -enum SQLITE_IOERR_WRITE = SQLITE_IOERR | (3 << 8); -enum SQLITE_IOERR_FSYNC = SQLITE_IOERR | (4 << 8); -enum SQLITE_IOERR_DIR_FSYNC = SQLITE_IOERR | (5 << 8); -enum SQLITE_IOERR_TRUNCATE = SQLITE_IOERR | (6 << 8); -enum SQLITE_IOERR_FSTAT = SQLITE_IOERR | (7 << 8); -enum SQLITE_IOERR_UNLOCK = SQLITE_IOERR | (8 << 8); -enum SQLITE_IOERR_RDLOCK = SQLITE_IOERR | (9 << 8); -enum SQLITE_IOERR_DELETE = SQLITE_IOERR | (10 << 8); -enum SQLITE_IOERR_BLOCKED = SQLITE_IOERR | (11 << 8); -enum SQLITE_IOERR_NOMEM = SQLITE_IOERR | (12 << 8); -enum SQLITE_IOERR_ACCESS = SQLITE_IOERR | (13 << 8); -enum SQLITE_IOERR_CHECKRESERVEDLOCK = SQLITE_IOERR | (14 << 8); -enum SQLITE_IOERR_LOCK = SQLITE_IOERR | (15 << 8); -enum SQLITE_IOERR_CLOSE = SQLITE_IOERR | (16 << 8); -enum SQLITE_IOERR_DIR_CLOSE = SQLITE_IOERR | (17 << 8); -enum SQLITE_IOERR_SHMOPEN = SQLITE_IOERR | (18 << 8); -enum SQLITE_IOERR_SHMSIZE = SQLITE_IOERR | (19 << 8); -enum SQLITE_IOERR_SHMLOCK = SQLITE_IOERR | (20 << 8); -enum SQLITE_IOERR_SHMMAP = SQLITE_IOERR | (21 << 8); -enum SQLITE_IOERR_SEEK = SQLITE_IOERR | (22 << 8); -enum SQLITE_IOERR_DELETE_NOENT = SQLITE_IOERR | (23 << 8); -enum SQLITE_IOERR_MMAP = SQLITE_IOERR | (24 << 8); -enum SQLITE_IOERR_GETTEMPPATH = SQLITE_IOERR | (25 << 8); -enum SQLITE_IOERR_CONVPATH = SQLITE_IOERR | (26 << 8); -enum SQLITE_IOERR_VNODE = SQLITE_IOERR | (27 << 8); -enum SQLITE_IOERR_AUTH = SQLITE_IOERR | (28 << 8); -enum SQLITE_IOERR_BEGIN_ATOMIC = SQLITE_IOERR | (29 << 8); -enum SQLITE_IOERR_COMMIT_ATOMIC = SQLITE_IOERR | (30 << 8); -enum SQLITE_IOERR_ROLLBACK_ATOMIC = SQLITE_IOERR | (31 << 8); -enum SQLITE_LOCKED_SHAREDCACHE = SQLITE_LOCKED | (1 << 8); -enum SQLITE_LOCKED_VTAB = SQLITE_LOCKED | (2 << 8); -enum SQLITE_BUSY_RECOVERY = SQLITE_BUSY | (1 << 8); -enum SQLITE_BUSY_SNAPSHOT = SQLITE_BUSY | (2 << 8); -enum SQLITE_CANTOPEN_NOTEMPDIR = SQLITE_CANTOPEN | (1 << 8); -enum SQLITE_CANTOPEN_ISDIR = SQLITE_CANTOPEN | (2 << 8); -enum SQLITE_CANTOPEN_FULLPATH = SQLITE_CANTOPEN | (3 << 8); -enum SQLITE_CANTOPEN_CONVPATH = SQLITE_CANTOPEN | (4 << 8); -enum SQLITE_CANTOPEN_DIRTYWAL = SQLITE_CANTOPEN | (5 << 8); /* Not Used */ -enum SQLITE_CORRUPT_VTAB = SQLITE_CORRUPT | (1 << 8); -enum SQLITE_CORRUPT_SEQUENCE = SQLITE_CORRUPT | (2 << 8); -enum SQLITE_READONLY_RECOVERY = SQLITE_READONLY | (1 << 8); -enum SQLITE_READONLY_CANTLOCK = SQLITE_READONLY | (2 << 8); -enum SQLITE_READONLY_ROLLBACK = SQLITE_READONLY | (3 << 8); -enum SQLITE_READONLY_DBMOVED = SQLITE_READONLY | (4 << 8); -enum SQLITE_READONLY_CANTINIT = SQLITE_READONLY | (5 << 8); -enum SQLITE_READONLY_DIRECTORY = SQLITE_READONLY | (6 << 8); -enum SQLITE_ABORT_ROLLBACK = SQLITE_ABORT | (2 << 8); -enum SQLITE_CONSTRAINT_CHECK = SQLITE_CONSTRAINT | (1 << 8); -enum SQLITE_CONSTRAINT_COMMITHOOK = SQLITE_CONSTRAINT | (2 << 8); -enum SQLITE_CONSTRAINT_FOREIGNKEY = SQLITE_CONSTRAINT | (3 << 8); -enum SQLITE_CONSTRAINT_FUNCTION = SQLITE_CONSTRAINT | (4 << 8); -enum SQLITE_CONSTRAINT_NOTNULL = SQLITE_CONSTRAINT | (5 << 8); -enum SQLITE_CONSTRAINT_PRIMARYKEY = SQLITE_CONSTRAINT | (6 << 8); -enum SQLITE_CONSTRAINT_TRIGGER = SQLITE_CONSTRAINT | (7 << 8); -enum SQLITE_CONSTRAINT_UNIQUE = SQLITE_CONSTRAINT | (8 << 8); -enum SQLITE_CONSTRAINT_VTAB = SQLITE_CONSTRAINT | (9 << 8); -enum SQLITE_CONSTRAINT_ROWID = SQLITE_CONSTRAINT | (10 << 8); -enum SQLITE_NOTICE_RECOVER_WAL = SQLITE_NOTICE | (1 << 8); -enum SQLITE_NOTICE_RECOVER_ROLLBACK = SQLITE_NOTICE | (2 << 8); -enum SQLITE_WARNING_AUTOINDEX = SQLITE_WARNING | (1 << 8); -enum SQLITE_AUTH_USER = SQLITE_AUTH | (1 << 8); -enum SQLITE_OK_LOAD_PERMANENTLY = SQLITE_OK | (1 << 8); - -/* -** CAPI3REF: Flags For File Open Operations -** -** These bit values are intended for use in the -** 3rd parameter to the [sqlite3_open_v2()] interface and -** in the 4th parameter to the [sqlite3_vfs.xOpen] method. -*/ -enum SQLITE_OPEN_READONLY = 0x00000001; /* Ok for sqlite3_open_v2() */ -enum SQLITE_OPEN_READWRITE = 0x00000002; /* Ok for sqlite3_open_v2() */ -enum SQLITE_OPEN_CREATE = 0x00000004; /* Ok for sqlite3_open_v2() */ -enum SQLITE_OPEN_DELETEONCLOSE = 0x00000008; /* VFS only */ -enum SQLITE_OPEN_EXCLUSIVE = 0x00000010; /* VFS only */ -enum SQLITE_OPEN_AUTOPROXY = 0x00000020; /* VFS only */ -enum SQLITE_OPEN_URI = 0x00000040; /* Ok for sqlite3_open_v2() */ -enum SQLITE_OPEN_MEMORY = 0x00000080; /* Ok for sqlite3_open_v2() */ -enum SQLITE_OPEN_MAIN_DB = 0x00000100; /* VFS only */ -enum SQLITE_OPEN_TEMP_DB = 0x00000200; /* VFS only */ -enum SQLITE_OPEN_TRANSIENT_DB = 0x00000400; /* VFS only */ -enum SQLITE_OPEN_MAIN_JOURNAL = 0x00000800; /* VFS only */ -enum SQLITE_OPEN_TEMP_JOURNAL = 0x00001000; /* VFS only */ -enum SQLITE_OPEN_SUBJOURNAL = 0x00002000; /* VFS only */ -enum SQLITE_OPEN_MASTER_JOURNAL = 0x00004000; /* VFS only */ -enum SQLITE_OPEN_NOMUTEX = 0x00008000; /* Ok for sqlite3_open_v2() */ -enum SQLITE_OPEN_FULLMUTEX = 0x00010000; /* Ok for sqlite3_open_v2() */ -enum SQLITE_OPEN_SHAREDCACHE = 0x00020000; /* Ok for sqlite3_open_v2() */ -enum SQLITE_OPEN_PRIVATECACHE = 0x00040000; /* Ok for sqlite3_open_v2() */ -enum SQLITE_OPEN_WAL = 0x00080000; /* VFS only */ - -/* Reserved: 0x00F00000 */ - -/* -** CAPI3REF: Device Characteristics -** -** The xDeviceCharacteristics method of the [sqlite3_io_methods] -** object returns an integer which is a vector of these -** bit values expressing I/O characteristics of the mass storage -** device that holds the file that the [sqlite3_io_methods] -** refers to. -** -** The SQLITE_IOCAP_ATOMIC property means that all writes of -** any size are atomic. The SQLITE_IOCAP_ATOMICnnn values -** mean that writes of blocks that are nnn bytes in size and -** are aligned to an address which is an integer multiple of -** nnn are atomic. The SQLITE_IOCAP_SAFE_APPEND value means -** that when data is appended to a file, the data is appended -** first then the size of the file is extended, never the other -** way around. The SQLITE_IOCAP_SEQUENTIAL property means that -** information is written to disk in the same order as calls -** to xWrite(). The SQLITE_IOCAP_POWERSAFE_OVERWRITE property means that -** after reboot following a crash or power loss, the only bytes in a -** file that were written at the application level might have changed -** and that adjacent bytes, even bytes within the same sector are -** guaranteed to be unchanged. The SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN -** flag indicates that a file cannot be deleted when open. The -** SQLITE_IOCAP_IMMUTABLE flag indicates that the file is on -** read-only media and cannot be changed even by processes with -** elevated privileges. -** -** The SQLITE_IOCAP_BATCH_ATOMIC property means that the underlying -** filesystem supports doing multiple write operations atomically when those -** write operations are bracketed by [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] and -** [SQLITE_FCNTL_COMMIT_ATOMIC_WRITE]. -*/ -enum SQLITE_IOCAP_ATOMIC = 0x00000001; -enum SQLITE_IOCAP_ATOMIC512 = 0x00000002; -enum SQLITE_IOCAP_ATOMIC1K = 0x00000004; -enum SQLITE_IOCAP_ATOMIC2K = 0x00000008; -enum SQLITE_IOCAP_ATOMIC4K = 0x00000010; -enum SQLITE_IOCAP_ATOMIC8K = 0x00000020; -enum SQLITE_IOCAP_ATOMIC16K = 0x00000040; -enum SQLITE_IOCAP_ATOMIC32K = 0x00000080; -enum SQLITE_IOCAP_ATOMIC64K = 0x00000100; -enum SQLITE_IOCAP_SAFE_APPEND = 0x00000200; -enum SQLITE_IOCAP_SEQUENTIAL = 0x00000400; -enum SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN = 0x00000800; -enum SQLITE_IOCAP_POWERSAFE_OVERWRITE = 0x00001000; -enum SQLITE_IOCAP_IMMUTABLE = 0x00002000; -enum SQLITE_IOCAP_BATCH_ATOMIC = 0x00004000; - -/* -** CAPI3REF: File Locking Levels -** -** SQLite uses one of these integer values as the second -** argument to calls it makes to the xLock() and xUnlock() methods -** of an [sqlite3_io_methods] object. -*/ -enum SQLITE_LOCK_NONE = 0; -enum SQLITE_LOCK_SHARED = 1; -enum SQLITE_LOCK_RESERVED = 2; -enum SQLITE_LOCK_PENDING = 3; -enum SQLITE_LOCK_EXCLUSIVE = 4; - -/* -** CAPI3REF: Synchronization Type Flags -** -** When SQLite invokes the xSync() method of an -** [sqlite3_io_methods] object it uses a combination of -** these integer values as the second argument. -** -** When the SQLITE_SYNC_DATAONLY flag is used, it means that the -** sync operation only needs to flush data to mass storage. Inode -** information need not be flushed. If the lower four bits of the flag -** equal SQLITE_SYNC_NORMAL, that means to use normal fsync() semantics. -** If the lower four bits equal SQLITE_SYNC_FULL, that means -** to use Mac OS X style fullsync instead of fsync(). -** -** Do not confuse the SQLITE_SYNC_NORMAL and SQLITE_SYNC_FULL flags -** with the [PRAGMA synchronous]=NORMAL and [PRAGMA synchronous]=FULL -** settings. The [synchronous pragma] determines when calls to the -** xSync VFS method occur and applies uniformly across all platforms. -** The SQLITE_SYNC_NORMAL and SQLITE_SYNC_FULL flags determine how -** energetic or rigorous or forceful the sync operations are and -** only make a difference on Mac OSX for the default SQLite code. -** (Third-party VFS implementations might also make the distinction -** between SQLITE_SYNC_NORMAL and SQLITE_SYNC_FULL, but among the -** operating systems natively supported by SQLite, only Mac OSX -** cares about the difference.) -*/ -enum SQLITE_SYNC_NORMAL = 0x00002; -enum SQLITE_SYNC_FULL = 0x00003; -enum SQLITE_SYNC_DATAONLY = 0x00010; - -/* -** CAPI3REF: OS Interface Open File Handle -** -** An [sqlite3_file] object represents an open file in the -** [sqlite3_vfs | OS interface layer]. Individual OS interface -** implementations will -** want to subclass this object by appending additional fields -** for their own use. The pMethods entry is a pointer to an -** [sqlite3_io_methods] object that defines methods for performing -** I/O operations on the open file. -*/ -struct sqlite3_file -{ - /* Methods for an open file */ - - /* - ** CAPI3REF: OS Interface File Virtual Methods Object - ** - ** Every file opened by the [sqlite3_vfs.xOpen] method populates an - ** [sqlite3_file] object (or, more commonly, a subclass of the - ** [sqlite3_file] object) with a pointer to an instance of this object. - ** This object defines the methods used to perform various operations - ** against the open file represented by the [sqlite3_file] object. - ** - ** If the [sqlite3_vfs.xOpen] method sets the sqlite3_file.pMethods element - ** to a non-NULL pointer, then the sqlite3_io_methods.xClose method - ** may be invoked even if the [sqlite3_vfs.xOpen] reported that it failed. The - ** only way to prevent a call to xClose following a failed [sqlite3_vfs.xOpen] - ** is for the [sqlite3_vfs.xOpen] to set the sqlite3_file.pMethods element - ** to NULL. - ** - ** The flags argument to xSync may be one of [SQLITE_SYNC_NORMAL] or - ** [SQLITE_SYNC_FULL]. The first choice is the normal fsync(). - ** The second choice is a Mac OS X style fullsync. The [SQLITE_SYNC_DATAONLY] - ** flag may be ORed in to indicate that only the data of the file - ** and not its inode needs to be synced. - ** - ** The integer values to xLock() and xUnlock() are one of - ** <ul> - ** <li> [SQLITE_LOCK_NONE], - ** <li> [SQLITE_LOCK_SHARED], - ** <li> [SQLITE_LOCK_RESERVED], - ** <li> [SQLITE_LOCK_PENDING], or - ** <li> [SQLITE_LOCK_EXCLUSIVE]. - ** </ul> - ** xLock() increases the lock. xUnlock() decreases the lock. - ** The xCheckReservedLock() method checks whether any database connection, - ** either in this process or in some other process, is holding a RESERVED, - ** PENDING, or EXCLUSIVE lock on the file. It returns true - ** if such a lock exists and false otherwise. - ** - ** The xFileControl() method is a generic interface that allows custom - ** VFS implementations to directly control an open file using the - ** [sqlite3_file_control()] interface. The second "op" argument is an - ** integer opcode. The third argument is a generic pointer intended to - ** point to a structure that may contain arguments or space in which to - ** write return values. Potential uses for xFileControl() might be - ** functions to enable blocking locks with timeouts, to change the - ** locking strategy (for example to use dot-file locks), to inquire - ** about the status of a lock, or to break stale locks. The SQLite - ** core reserves all opcodes less than 100 for its own use. - ** A [file control opcodes | list of opcodes] less than 100 is available. - ** Applications that define a custom xFileControl method should use opcodes - ** greater than 100 to avoid conflicts. VFS implementations should - ** return [SQLITE_NOTFOUND] for file control opcodes that they do not - ** recognize. - ** - ** The xSectorSize() method returns the sector size of the - ** device that underlies the file. The sector size is the - ** minimum write that can be performed without disturbing - ** other bytes in the file. The xDeviceCharacteristics() - ** method returns a bit vector describing behaviors of the - ** underlying device: - ** - ** <ul> - ** <li> [SQLITE_IOCAP_ATOMIC] - ** <li> [SQLITE_IOCAP_ATOMIC512] - ** <li> [SQLITE_IOCAP_ATOMIC1K] - ** <li> [SQLITE_IOCAP_ATOMIC2K] - ** <li> [SQLITE_IOCAP_ATOMIC4K] - ** <li> [SQLITE_IOCAP_ATOMIC8K] - ** <li> [SQLITE_IOCAP_ATOMIC16K] - ** <li> [SQLITE_IOCAP_ATOMIC32K] - ** <li> [SQLITE_IOCAP_ATOMIC64K] - ** <li> [SQLITE_IOCAP_SAFE_APPEND] - ** <li> [SQLITE_IOCAP_SEQUENTIAL] - ** <li> [SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN] - ** <li> [SQLITE_IOCAP_POWERSAFE_OVERWRITE] - ** <li> [SQLITE_IOCAP_IMMUTABLE] - ** <li> [SQLITE_IOCAP_BATCH_ATOMIC] - ** </ul> - ** - ** The SQLITE_IOCAP_ATOMIC property means that all writes of - ** any size are atomic. The SQLITE_IOCAP_ATOMICnnn values - ** mean that writes of blocks that are nnn bytes in size and - ** are aligned to an address which is an integer multiple of - ** nnn are atomic. The SQLITE_IOCAP_SAFE_APPEND value means - ** that when data is appended to a file, the data is appended - ** first then the size of the file is extended, never the other - ** way around. The SQLITE_IOCAP_SEQUENTIAL property means that - ** information is written to disk in the same order as calls - ** to xWrite(). - ** - ** If xRead() returns SQLITE_IOERR_SHORT_READ it must also fill - ** in the unread portions of the buffer with zeros. A VFS that - ** fails to zero-fill short reads might seem to work. However, - ** failure to zero-fill short reads will eventually lead to - ** database corruption. - */ - - struct sqlite3_io_methods - { - int iVersion; - int function(sqlite3_file*) xClose; - int function(sqlite3_file*, void*, int iAmt, sqlite3_int64 iOfst) xRead; - int function(sqlite3_file*, const(void)*, int iAmt, sqlite3_int64 iOfst) xWrite; - int function(sqlite3_file*, sqlite3_int64 size) xTruncate; - int function(sqlite3_file*, int flags) xSync; - int function(sqlite3_file*, sqlite3_int64* pSize) xFileSize; - int function(sqlite3_file*, int) xLock; - int function(sqlite3_file*, int) xUnlock; - int function(sqlite3_file*, int* pResOut) xCheckReservedLock; - int function(sqlite3_file*, int op, void* pArg) xFileControl; - int function(sqlite3_file*) xSectorSize; - int function(sqlite3_file*) xDeviceCharacteristics; - /* Methods above are valid for version 1 */ - int function(sqlite3_file*, int iPg, int pgsz, int, void**) xShmMap; - int function(sqlite3_file*, int offset, int n, int flags) xShmLock; - void function(sqlite3_file*) xShmBarrier; - int function(sqlite3_file*, int deleteFlag) xShmUnmap; - /* Methods above are valid for version 2 */ - int function(sqlite3_file*, sqlite3_int64 iOfst, int iAmt, void** pp) xFetch; - int function(sqlite3_file*, sqlite3_int64 iOfst, void* p) xUnfetch; - /* Methods above are valid for version 3 */ - /* Additional methods may be added in future releases */ - } - - const(sqlite3_io_methods)* pMethods; -} - -struct sqlite3_io_methods -{ - int iVersion; - int function(sqlite3_file*) xClose; - int function(sqlite3_file*, void*, int iAmt, sqlite3_int64 iOfst) xRead; - int function(sqlite3_file*, const(void)*, int iAmt, sqlite3_int64 iOfst) xWrite; - int function(sqlite3_file*, sqlite3_int64 size) xTruncate; - int function(sqlite3_file*, int flags) xSync; - int function(sqlite3_file*, sqlite3_int64* pSize) xFileSize; - int function(sqlite3_file*, int) xLock; - int function(sqlite3_file*, int) xUnlock; - int function(sqlite3_file*, int* pResOut) xCheckReservedLock; - int function(sqlite3_file*, int op, void* pArg) xFileControl; - int function(sqlite3_file*) xSectorSize; - int function(sqlite3_file*) xDeviceCharacteristics; - int function(sqlite3_file*, int iPg, int pgsz, int, void**) xShmMap; - int function(sqlite3_file*, int offset, int n, int flags) xShmLock; - void function(sqlite3_file*) xShmBarrier; - int function(sqlite3_file*, int deleteFlag) xShmUnmap; - int function(sqlite3_file*, sqlite3_int64 iOfst, int iAmt, void** pp) xFetch; - int function(sqlite3_file*, sqlite3_int64 iOfst, void* p) xUnfetch; -} - -/* -** CAPI3REF: Standard File Control Opcodes -** KEYWORDS: {file control opcodes} {file control opcode} -** -** These integer constants are opcodes for the xFileControl method -** of the [sqlite3_io_methods] object and for the [sqlite3_file_control()] -** interface. -** -** <ul> -** <li>[[SQLITE_FCNTL_LOCKSTATE]] -** The [SQLITE_FCNTL_LOCKSTATE] opcode is used for debugging. This -** opcode causes the xFileControl method to write the current state of -** the lock (one of [SQLITE_LOCK_NONE], [SQLITE_LOCK_SHARED], -** [SQLITE_LOCK_RESERVED], [SQLITE_LOCK_PENDING], or [SQLITE_LOCK_EXCLUSIVE]) -** into an integer that the pArg argument points to. This capability -** is used during testing and is only available when the SQLITE_TEST -** compile-time option is used. -** -** <li>[[SQLITE_FCNTL_SIZE_HINT]] -** The [SQLITE_FCNTL_SIZE_HINT] opcode is used by SQLite to give the VFS -** layer a hint of how large the database file will grow to be during the -** current transaction. This hint is not guaranteed to be accurate but it -** is often close. The underlying VFS might choose to preallocate database -** file space based on this hint in order to help writes to the database -** file run faster. -** -** <li>[[SQLITE_FCNTL_CHUNK_SIZE]] -** The [SQLITE_FCNTL_CHUNK_SIZE] opcode is used to request that the VFS -** extends and truncates the database file in chunks of a size specified -** by the user. The fourth argument to [sqlite3_file_control()] should -** point to an integer (type int) containing the new chunk-size to use -** for the nominated database. Allocating database file space in large -** chunks (say 1MB at a time), may reduce file-system fragmentation and -** improve performance on some systems. -** -** <li>[[SQLITE_FCNTL_FILE_POINTER]] -** The [SQLITE_FCNTL_FILE_POINTER] opcode is used to obtain a pointer -** to the [sqlite3_file] object associated with a particular database -** connection. See also [SQLITE_FCNTL_JOURNAL_POINTER]. -** -** <li>[[SQLITE_FCNTL_JOURNAL_POINTER]] -** The [SQLITE_FCNTL_JOURNAL_POINTER] opcode is used to obtain a pointer -** to the [sqlite3_file] object associated with the journal file (either -** the [rollback journal] or the [write-ahead log]) for a particular database -** connection. See also [SQLITE_FCNTL_FILE_POINTER]. -** -** <li>[[SQLITE_FCNTL_SYNC_OMITTED]] -** No longer in use. -** -** <li>[[SQLITE_FCNTL_SYNC]] -** The [SQLITE_FCNTL_SYNC] opcode is generated internally by SQLite and -** sent to the VFS immediately before the xSync method is invoked on a -** database file descriptor. Or, if the xSync method is not invoked -** because the user has configured SQLite with -** [PRAGMA synchronous | PRAGMA synchronous=OFF] it is invoked in place -** of the xSync method. In most cases, the pointer argument passed with -** this file-control is NULL. However, if the database file is being synced -** as part of a multi-database commit, the argument points to a nul-terminated -** string containing the transactions master-journal file name. VFSes that -** do not need this signal should silently ignore this opcode. Applications -** should not call [sqlite3_file_control()] with this opcode as doing so may -** disrupt the operation of the specialized VFSes that do require it. -** -** <li>[[SQLITE_FCNTL_COMMIT_PHASETWO]] -** The [SQLITE_FCNTL_COMMIT_PHASETWO] opcode is generated internally by SQLite -** and sent to the VFS after a transaction has been committed immediately -** but before the database is unlocked. VFSes that do not need this signal -** should silently ignore this opcode. Applications should not call -** [sqlite3_file_control()] with this opcode as doing so may disrupt the -** operation of the specialized VFSes that do require it. -** -** <li>[[SQLITE_FCNTL_WIN32_AV_RETRY]] -** ^The [SQLITE_FCNTL_WIN32_AV_RETRY] opcode is used to configure automatic -** retry counts and intervals for certain disk I/O operations for the -** windows [VFS] in order to provide robustness in the presence of -** anti-virus programs. By default, the windows VFS will retry file read, -** file write, and file delete operations up to 10 times, with a delay -** of 25 milliseconds before the first retry and with the delay increasing -** by an additional 25 milliseconds with each subsequent retry. This -** opcode allows these two values (10 retries and 25 milliseconds of delay) -** to be adjusted. The values are changed for all database connections -** within the same process. The argument is a pointer to an array of two -** integers where the first integer is the new retry count and the second -** integer is the delay. If either integer is negative, then the setting -** is not changed but instead the prior value of that setting is written -** into the array entry, allowing the current retry settings to be -** interrogated. The zDbName parameter is ignored. -** -** <li>[[SQLITE_FCNTL_PERSIST_WAL]] -** ^The [SQLITE_FCNTL_PERSIST_WAL] opcode is used to set or query the -** persistent [WAL | Write Ahead Log] setting. By default, the auxiliary -** write ahead log ([WAL file]) and shared memory -** files used for transaction control -** are automatically deleted when the latest connection to the database -** closes. Setting persistent WAL mode causes those files to persist after -** close. Persisting the files is useful when other processes that do not -** have write permission on the directory containing the database file want -** to read the database file, as the WAL and shared memory files must exist -** in order for the database to be readable. The fourth parameter to -** [sqlite3_file_control()] for this opcode should be a pointer to an integer. -** That integer is 0 to disable persistent WAL mode or 1 to enable persistent -** WAL mode. If the integer is -1, then it is overwritten with the current -** WAL persistence setting. -** -** <li>[[SQLITE_FCNTL_POWERSAFE_OVERWRITE]] -** ^The [SQLITE_FCNTL_POWERSAFE_OVERWRITE] opcode is used to set or query the -** persistent "powersafe-overwrite" or "PSOW" setting. The PSOW setting -** determines the [SQLITE_IOCAP_POWERSAFE_OVERWRITE] bit of the -** xDeviceCharacteristics methods. The fourth parameter to -** [sqlite3_file_control()] for this opcode should be a pointer to an integer. -** That integer is 0 to disable zero-damage mode or 1 to enable zero-damage -** mode. If the integer is -1, then it is overwritten with the current -** zero-damage mode setting. -** -** <li>[[SQLITE_FCNTL_OVERWRITE]] -** ^The [SQLITE_FCNTL_OVERWRITE] opcode is invoked by SQLite after opening -** a write transaction to indicate that, unless it is rolled back for some -** reason, the entire database file will be overwritten by the current -** transaction. This is used by VACUUM operations. -** -** <li>[[SQLITE_FCNTL_VFSNAME]] -** ^The [SQLITE_FCNTL_VFSNAME] opcode can be used to obtain the names of -** all [VFSes] in the VFS stack. The names are of all VFS shims and the -** final bottom-level VFS are written into memory obtained from -** [sqlite3_malloc()] and the result is stored in the char* variable -** that the fourth parameter of [sqlite3_file_control()] points to. -** The caller is responsible for freeing the memory when done. As with -** all file-control actions, there is no guarantee that this will actually -** do anything. Callers should initialize the char* variable to a NULL -** pointer in case this file-control is not implemented. This file-control -** is intended for diagnostic use only. -** -** <li>[[SQLITE_FCNTL_VFS_POINTER]] -** ^The [SQLITE_FCNTL_VFS_POINTER] opcode finds a pointer to the top-level -** [VFSes] currently in use. ^(The argument X in -** sqlite3_file_control(db,SQLITE_FCNTL_VFS_POINTER,X) must be -** of type "[sqlite3_vfs] **". This opcodes will set *X -** to a pointer to the top-level VFS.)^ -** ^When there are multiple VFS shims in the stack, this opcode finds the -** upper-most shim only. -** -** <li>[[SQLITE_FCNTL_PRAGMA]] -** ^Whenever a [PRAGMA] statement is parsed, an [SQLITE_FCNTL_PRAGMA] -** file control is sent to the open [sqlite3_file] object corresponding -** to the database file to which the pragma statement refers. ^The argument -** to the [SQLITE_FCNTL_PRAGMA] file control is an array of -** pointers to strings (char**) in which the second element of the array -** is the name of the pragma and the third element is the argument to the -** pragma or NULL if the pragma has no argument. ^The handler for an -** [SQLITE_FCNTL_PRAGMA] file control can optionally make the first element -** of the char** argument point to a string obtained from [sqlite3_mprintf()] -** or the equivalent and that string will become the result of the pragma or -** the error message if the pragma fails. ^If the -** [SQLITE_FCNTL_PRAGMA] file control returns [SQLITE_NOTFOUND], then normal -** [PRAGMA] processing continues. ^If the [SQLITE_FCNTL_PRAGMA] -** file control returns [SQLITE_OK], then the parser assumes that the -** VFS has handled the PRAGMA itself and the parser generates a no-op -** prepared statement if result string is NULL, or that returns a copy -** of the result string if the string is non-NULL. -** ^If the [SQLITE_FCNTL_PRAGMA] file control returns -** any result code other than [SQLITE_OK] or [SQLITE_NOTFOUND], that means -** that the VFS encountered an error while handling the [PRAGMA] and the -** compilation of the PRAGMA fails with an error. ^The [SQLITE_FCNTL_PRAGMA] -** file control occurs at the beginning of pragma statement analysis and so -** it is able to override built-in [PRAGMA] statements. -** -** <li>[[SQLITE_FCNTL_BUSYHANDLER]] -** ^The [SQLITE_FCNTL_BUSYHANDLER] -** file-control may be invoked by SQLite on the database file handle -** shortly after it is opened in order to provide a custom VFS with access -** to the connections busy-handler callback. The argument is of type (void **) -** - an array of two (void *) values. The first (void *) actually points -** to a function of type (int (*)(void *)). In order to invoke the connections -** busy-handler, this function should be invoked with the second (void *) in -** the array as the only argument. If it returns non-zero, then the operation -** should be retried. If it returns zero, the custom VFS should abandon the -** current operation. -** -** <li>[[SQLITE_FCNTL_TEMPFILENAME]] -** ^Application can invoke the [SQLITE_FCNTL_TEMPFILENAME] file-control -** to have SQLite generate a -** temporary filename using the same algorithm that is followed to generate -** temporary filenames for TEMP tables and other internal uses. The -** argument should be a char** which will be filled with the filename -** written into memory obtained from [sqlite3_malloc()]. The caller should -** invoke [sqlite3_free()] on the result to avoid a memory leak. -** -** <li>[[SQLITE_FCNTL_MMAP_SIZE]] -** The [SQLITE_FCNTL_MMAP_SIZE] file control is used to query or set the -** maximum number of bytes that will be used for memory-mapped I/O. -** The argument is a pointer to a value of type sqlite3_int64 that -** is an advisory maximum number of bytes in the file to memory map. The -** pointer is overwritten with the old value. The limit is not changed if -** the value originally pointed to is negative, and so the current limit -** can be queried by passing in a pointer to a negative number. This -** file-control is used internally to implement [PRAGMA mmap_size]. -** -** <li>[[SQLITE_FCNTL_TRACE]] -** The [SQLITE_FCNTL_TRACE] file control provides advisory information -** to the VFS about what the higher layers of the SQLite stack are doing. -** This file control is used by some VFS activity tracing [shims]. -** The argument is a zero-terminated string. Higher layers in the -** SQLite stack may generate instances of this file control if -** the [SQLITE_USE_FCNTL_TRACE] compile-time option is enabled. -** -** <li>[[SQLITE_FCNTL_HAS_MOVED]] -** The [SQLITE_FCNTL_HAS_MOVED] file control interprets its argument as a -** pointer to an integer and it writes a boolean into that integer depending -** on whether or not the file has been renamed, moved, or deleted since it -** was first opened. -** -** <li>[[SQLITE_FCNTL_WIN32_GET_HANDLE]] -** The [SQLITE_FCNTL_WIN32_GET_HANDLE] opcode can be used to obtain the -** underlying native file handle associated with a file handle. This file -** control interprets its argument as a pointer to a native file handle and -** writes the resulting value there. -** -** <li>[[SQLITE_FCNTL_WIN32_SET_HANDLE]] -** The [SQLITE_FCNTL_WIN32_SET_HANDLE] opcode is used for debugging. This -** opcode causes the xFileControl method to swap the file handle with the one -** pointed to by the pArg argument. This capability is used during testing -** and only needs to be supported when SQLITE_TEST is defined. -** -** <li>[[SQLITE_FCNTL_WAL_BLOCK]] -** The [SQLITE_FCNTL_WAL_BLOCK] is a signal to the VFS layer that it might -** be advantageous to block on the next WAL lock if the lock is not immediately -** available. The WAL subsystem issues this signal during rare -** circumstances in order to fix a problem with priority inversion. -** Applications should <em>not</em> use this file-control. -** -** <li>[[SQLITE_FCNTL_ZIPVFS]] -** The [SQLITE_FCNTL_ZIPVFS] opcode is implemented by zipvfs only. All other -** VFS should return SQLITE_NOTFOUND for this opcode. -** -** <li>[[SQLITE_FCNTL_RBU]] -** The [SQLITE_FCNTL_RBU] opcode is implemented by the special VFS used by -** the RBU extension only. All other VFS should return SQLITE_NOTFOUND for -** this opcode. -** -** <li>[[SQLITE_FCNTL_BEGIN_ATOMIC_WRITE]] -** If the [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] opcode returns SQLITE_OK, then -** the file descriptor is placed in "batch write mode", which -** means all subsequent write operations will be deferred and done -** atomically at the next [SQLITE_FCNTL_COMMIT_ATOMIC_WRITE]. Systems -** that do not support batch atomic writes will return SQLITE_NOTFOUND. -** ^Following a successful SQLITE_FCNTL_BEGIN_ATOMIC_WRITE and prior to -** the closing [SQLITE_FCNTL_COMMIT_ATOMIC_WRITE] or -** [SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE], SQLite will make -** no VFS interface calls on the same [sqlite3_file] file descriptor -** except for calls to the xWrite method and the xFileControl method -** with [SQLITE_FCNTL_SIZE_HINT]. -** -** <li>[[SQLITE_FCNTL_COMMIT_ATOMIC_WRITE]] -** The [SQLITE_FCNTL_COMMIT_ATOMIC_WRITE] opcode causes all write -** operations since the previous successful call to -** [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] to be performed atomically. -** This file control returns [SQLITE_OK] if and only if the writes were -** all performed successfully and have been committed to persistent storage. -** ^Regardless of whether or not it is successful, this file control takes -** the file descriptor out of batch write mode so that all subsequent -** write operations are independent. -** ^SQLite will never invoke SQLITE_FCNTL_COMMIT_ATOMIC_WRITE without -** a prior successful call to [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE]. -** -** <li>[[SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE]] -** The [SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE] opcode causes all write -** operations since the previous successful call to -** [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] to be rolled back. -** ^This file control takes the file descriptor out of batch write mode -** so that all subsequent write operations are independent. -** ^SQLite will never invoke SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE without -** a prior successful call to [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE]. -** -** <li>[[SQLITE_FCNTL_LOCK_TIMEOUT]] -** The [SQLITE_FCNTL_LOCK_TIMEOUT] opcode causes attempts to obtain -** a file lock using the xLock or xShmLock methods of the VFS to wait -** for up to M milliseconds before failing, where M is the single -** unsigned integer parameter. -** -** <li>[[SQLITE_FCNTL_DATA_VERSION]] -** The [SQLITE_FCNTL_DATA_VERSION] opcode is used to detect changes to -** a database file. The argument is a pointer to a 32-bit unsigned integer. -** The "data version" for the pager is written into the pointer. The -** "data version" changes whenever any change occurs to the corresponding -** database file, either through SQL statements on the same database -** connection or through transactions committed by separate database -** connections possibly in other processes. The [sqlite3_total_changes()] -** interface can be used to find if any database on the connection has changed, -** but that interface responds to changes on TEMP as well as MAIN and does -** not provide a mechanism to detect changes to MAIN only. Also, the -** [sqlite3_total_changes()] interface responds to internal changes only and -** omits changes made by other database connections. The -** [PRAGMA data_version] command provide a mechanism to detect changes to -** a single attached database that occur due to other database connections, -** but omits changes implemented by the database connection on which it is -** called. This file control is the only mechanism to detect changes that -** happen either internally or externally and that are associated with -** a particular attached database. -** </ul> -*/ -enum SQLITE_FCNTL_LOCKSTATE = 1; -enum SQLITE_FCNTL_GET_LOCKPROXYFILE = 2; -enum SQLITE_FCNTL_SET_LOCKPROXYFILE = 3; -enum SQLITE_FCNTL_LAST_ERRNO = 4; -enum SQLITE_FCNTL_SIZE_HINT = 5; -enum SQLITE_FCNTL_CHUNK_SIZE = 6; -enum SQLITE_FCNTL_FILE_POINTER = 7; -enum SQLITE_FCNTL_SYNC_OMITTED = 8; -enum SQLITE_FCNTL_WIN32_AV_RETRY = 9; -enum SQLITE_FCNTL_PERSIST_WAL = 10; -enum SQLITE_FCNTL_OVERWRITE = 11; -enum SQLITE_FCNTL_VFSNAME = 12; -enum SQLITE_FCNTL_POWERSAFE_OVERWRITE = 13; -enum SQLITE_FCNTL_PRAGMA = 14; -enum SQLITE_FCNTL_BUSYHANDLER = 15; -enum SQLITE_FCNTL_TEMPFILENAME = 16; -enum SQLITE_FCNTL_MMAP_SIZE = 18; -enum SQLITE_FCNTL_TRACE = 19; -enum SQLITE_FCNTL_HAS_MOVED = 20; -enum SQLITE_FCNTL_SYNC = 21; -enum SQLITE_FCNTL_COMMIT_PHASETWO = 22; -enum SQLITE_FCNTL_WIN32_SET_HANDLE = 23; -enum SQLITE_FCNTL_WAL_BLOCK = 24; -enum SQLITE_FCNTL_ZIPVFS = 25; -enum SQLITE_FCNTL_RBU = 26; -enum SQLITE_FCNTL_VFS_POINTER = 27; -enum SQLITE_FCNTL_JOURNAL_POINTER = 28; -enum SQLITE_FCNTL_WIN32_GET_HANDLE = 29; -enum SQLITE_FCNTL_PDB = 30; -enum SQLITE_FCNTL_BEGIN_ATOMIC_WRITE = 31; -enum SQLITE_FCNTL_COMMIT_ATOMIC_WRITE = 32; -enum SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE = 33; -enum SQLITE_FCNTL_LOCK_TIMEOUT = 34; -enum SQLITE_FCNTL_DATA_VERSION = 35; - -/* deprecated names */ -enum SQLITE_GET_LOCKPROXYFILE = SQLITE_FCNTL_GET_LOCKPROXYFILE; -enum SQLITE_SET_LOCKPROXYFILE = SQLITE_FCNTL_SET_LOCKPROXYFILE; -enum SQLITE_LAST_ERRNO = SQLITE_FCNTL_LAST_ERRNO; - -/* -** CAPI3REF: Mutex Handle -** -** The mutex module within SQLite defines [sqlite3_mutex] to be an -** abstract type for a mutex object. The SQLite core never looks -** at the internal representation of an [sqlite3_mutex]. It only -** deals with pointers to the [sqlite3_mutex] object. -** -** Mutexes are created using [sqlite3_mutex_alloc()]. -*/ -struct sqlite3_mutex; - -/* -** CAPI3REF: Loadable Extension Thunk -** -** A pointer to the opaque sqlite3_api_routines structure is passed as -** the third parameter to entry points of [loadable extensions]. This -** structure must be typedefed in order to work around compiler warnings -** on some platforms. -*/ -struct sqlite3_api_routines; - -/* -** CAPI3REF: OS Interface Object -** -** An instance of the sqlite3_vfs object defines the interface between -** the SQLite core and the underlying operating system. The "vfs" -** in the name of the object stands for "virtual file system". See -** the [VFS | VFS documentation] for further information. -** -** The VFS interface is sometimes extended by adding new methods onto -** the end. Each time such an extension occurs, the iVersion field -** is incremented. The iVersion value started out as 1 in -** SQLite [version 3.5.0] on [dateof:3.5.0], then increased to 2 -** with SQLite [version 3.7.0] on [dateof:3.7.0], and then increased -** to 3 with SQLite [version 3.7.6] on [dateof:3.7.6]. Additional fields -** may be appended to the sqlite3_vfs object and the iVersion value -** may increase again in future versions of SQLite. -** Note that the structure -** of the sqlite3_vfs object changes in the transition from -** SQLite [version 3.5.9] to [version 3.6.0] on [dateof:3.6.0] -** and yet the iVersion field was not modified. -** -** The szOsFile field is the size of the subclassed [sqlite3_file] -** structure used by this VFS. mxPathname is the maximum length of -** a pathname in this VFS. -** -** Registered sqlite3_vfs objects are kept on a linked list formed by -** the pNext pointer. The [sqlite3_vfs_register()] -** and [sqlite3_vfs_unregister()] interfaces manage this list -** in a thread-safe way. The [sqlite3_vfs_find()] interface -** searches the list. Neither the application code nor the VFS -** implementation should use the pNext pointer. -** -** The pNext field is the only field in the sqlite3_vfs -** structure that SQLite will ever modify. SQLite will only access -** or modify this field while holding a particular static mutex. -** The application should never modify anything within the sqlite3_vfs -** object once the object has been registered. -** -** The zName field holds the name of the VFS module. The name must -** be unique across all VFS modules. -** -** [[sqlite3_vfs.xOpen]] -** ^SQLite guarantees that the zFilename parameter to xOpen -** is either a NULL pointer or string obtained -** from xFullPathname() with an optional suffix added. -** ^If a suffix is added to the zFilename parameter, it will -** consist of a single "-" character followed by no more than -** 11 alphanumeric and/or "-" characters. -** ^SQLite further guarantees that -** the string will be valid and unchanged until xClose() is -** called. Because of the previous sentence, -** the [sqlite3_file] can safely store a pointer to the -** filename if it needs to remember the filename for some reason. -** If the zFilename parameter to xOpen is a NULL pointer then xOpen -** must invent its own temporary name for the file. ^Whenever the -** xFilename parameter is NULL it will also be the case that the -** flags parameter will include [SQLITE_OPEN_DELETEONCLOSE]. -** -** The flags argument to xOpen() includes all bits set in -** the flags argument to [sqlite3_open_v2()]. Or if [sqlite3_open()] -** or [sqlite3_open16()] is used, then flags includes at least -** [SQLITE_OPEN_READWRITE] | [SQLITE_OPEN_CREATE]. -** If xOpen() opens a file read-only then it sets *pOutFlags to -** include [SQLITE_OPEN_READONLY]. Other bits in *pOutFlags may be set. -** -** ^(SQLite will also add one of the following flags to the xOpen() -** call, depending on the object being opened: -** -** <ul> -** <li> [SQLITE_OPEN_MAIN_DB] -** <li> [SQLITE_OPEN_MAIN_JOURNAL] -** <li> [SQLITE_OPEN_TEMP_DB] -** <li> [SQLITE_OPEN_TEMP_JOURNAL] -** <li> [SQLITE_OPEN_TRANSIENT_DB] -** <li> [SQLITE_OPEN_SUBJOURNAL] -** <li> [SQLITE_OPEN_MASTER_JOURNAL] -** <li> [SQLITE_OPEN_WAL] -** </ul>)^ -** -** The file I/O implementation can use the object type flags to -** change the way it deals with files. For example, an application -** that does not care about crash recovery or rollback might make -** the open of a journal file a no-op. Writes to this journal would -** also be no-ops, and any attempt to read the journal would return -** SQLITE_IOERR. Or the implementation might recognize that a database -** file will be doing page-aligned sector reads and writes in a random -** order and set up its I/O subsystem accordingly. -** -** SQLite might also add one of the following flags to the xOpen method: -** -** <ul> -** <li> [SQLITE_OPEN_DELETEONCLOSE] -** <li> [SQLITE_OPEN_EXCLUSIVE] -** </ul> -** -** The [SQLITE_OPEN_DELETEONCLOSE] flag means the file should be -** deleted when it is closed. ^The [SQLITE_OPEN_DELETEONCLOSE] -** will be set for TEMP databases and their journals, transient -** databases, and subjournals. -** -** ^The [SQLITE_OPEN_EXCLUSIVE] flag is always used in conjunction -** with the [SQLITE_OPEN_CREATE] flag, which are both directly -** analogous to the O_EXCL and O_CREAT flags of the POSIX open() -** API. The SQLITE_OPEN_EXCLUSIVE flag, when paired with the -** SQLITE_OPEN_CREATE, is used to indicate that file should always -** be created, and that it is an error if it already exists. -** It is <i>not</i> used to indicate the file should be opened -** for exclusive access. -** -** ^At least szOsFile bytes of memory are allocated by SQLite -** to hold the [sqlite3_file] structure passed as the third -** argument to xOpen. The xOpen method does not have to -** allocate the structure; it should just fill it in. Note that -** the xOpen method must set the sqlite3_file.pMethods to either -** a valid [sqlite3_io_methods] object or to NULL. xOpen must do -** this even if the open fails. SQLite expects that the sqlite3_file.pMethods -** element will be valid after xOpen returns regardless of the success -** or failure of the xOpen call. -** -** [[sqlite3_vfs.xAccess]] -** ^The flags argument to xAccess() may be [SQLITE_ACCESS_EXISTS] -** to test for the existence of a file, or [SQLITE_ACCESS_READWRITE] to -** test whether a file is readable and writable, or [SQLITE_ACCESS_READ] -** to test whether a file is at least readable. The file can be a -** directory. -** -** ^SQLite will always allocate at least mxPathname+1 bytes for the -** output buffer xFullPathname. The exact size of the output buffer -** is also passed as a parameter to both methods. If the output buffer -** is not large enough, [SQLITE_CANTOPEN] should be returned. Since this is -** handled as a fatal error by SQLite, vfs implementations should endeavor -** to prevent this by setting mxPathname to a sufficiently large value. -** -** The xRandomness(), xSleep(), xCurrentTime(), and xCurrentTimeInt64() -** interfaces are not strictly a part of the filesystem, but they are -** included in the VFS structure for completeness. -** The xRandomness() function attempts to return nBytes bytes -** of good-quality randomness into zOut. The return value is -** the actual number of bytes of randomness obtained. -** The xSleep() method causes the calling thread to sleep for at -** least the number of microseconds given. ^The xCurrentTime() -** method returns a Julian Day Number for the current date and time as -** a floating point value. -** ^The xCurrentTimeInt64() method returns, as an integer, the Julian -** Day Number multiplied by 86400000 (the number of milliseconds in -** a 24-hour day). -** ^SQLite will use the xCurrentTimeInt64() method to get the current -** date and time if that method is available (if iVersion is 2 or -** greater and the function pointer is not NULL) and will fall back -** to xCurrentTime() if xCurrentTimeInt64() is unavailable. -** -** ^The xSetSystemCall(), xGetSystemCall(), and xNestSystemCall() interfaces -** are not used by the SQLite core. These optional interfaces are provided -** by some VFSes to facilitate testing of the VFS code. By overriding -** system calls with functions under its control, a test program can -** simulate faults and error conditions that would otherwise be difficult -** or impossible to induce. The set of system calls that can be overridden -** varies from one VFS to another, and from one version of the same VFS to the -** next. Applications that use these interfaces must be prepared for any -** or all of these interfaces to be NULL or for their behavior to change -** from one release to the next. Applications must not attempt to access -** any of these methods if the iVersion of the VFS is less than 3. -*/ -alias sqlite3_syscall_ptr = void function(); - -struct sqlite3_vfs -{ - int iVersion; /* Structure version number (currently 3) */ - int szOsFile; /* Size of subclassed sqlite3_file */ - int mxPathname; /* Maximum file pathname length */ - sqlite3_vfs* pNext; /* Next registered VFS */ - const(char)* zName; /* Name of this virtual file system */ - void* pAppData; /* Pointer to application-specific data */ - int function(sqlite3_vfs*, const(char)* zName, sqlite3_file*, int flags, int* pOutFlags) xOpen; - int function(sqlite3_vfs*, const(char)* zName, int syncDir) xDelete; - int function(sqlite3_vfs*, const(char)* zName, int flags, int* pResOut) xAccess; - int function(sqlite3_vfs*, const(char)* zName, int nOut, char* zOut) xFullPathname; - void* function(sqlite3_vfs*, const(char)* zFilename) xDlOpen; - void function(sqlite3_vfs*, int nByte, char* zErrMsg) xDlError; - void function(sqlite3_vfs*, void*, const(char)* zSymbol) function(sqlite3_vfs*, void*, const(char)* zSymbol) xDlSym; - void function(sqlite3_vfs*, void*) xDlClose; - int function(sqlite3_vfs*, int nByte, char* zOut) xRandomness; - int function(sqlite3_vfs*, int microseconds) xSleep; - int function(sqlite3_vfs*, double*) xCurrentTime; - int function(sqlite3_vfs*, int, char*) xGetLastError; - /* - ** The methods above are in version 1 of the sqlite_vfs object - ** definition. Those that follow are added in version 2 or later - */ - int function(sqlite3_vfs*, sqlite3_int64*) xCurrentTimeInt64; - /* - ** The methods above are in versions 1 and 2 of the sqlite_vfs object. - ** Those below are for version 3 and greater. - */ - int function(sqlite3_vfs*, const(char)* zName, sqlite3_syscall_ptr) xSetSystemCall; - sqlite3_syscall_ptr function(sqlite3_vfs*, const(char)* zName) xGetSystemCall; - const(char)* function(sqlite3_vfs*, const(char)* zName) xNextSystemCall; - /* - ** The methods above are in versions 1 through 3 of the sqlite_vfs object. - ** New fields may be appended in future versions. The iVersion - ** value will increment whenever this happens. - */ -} - -/* -** CAPI3REF: Flags for the xAccess VFS method -** -** These integer constants can be used as the third parameter to -** the xAccess method of an [sqlite3_vfs] object. They determine -** what kind of permissions the xAccess method is looking for. -** With SQLITE_ACCESS_EXISTS, the xAccess method -** simply checks whether the file exists. -** With SQLITE_ACCESS_READWRITE, the xAccess method -** checks whether the named directory is both readable and writable -** (in other words, if files can be added, removed, and renamed within -** the directory). -** The SQLITE_ACCESS_READWRITE constant is currently used only by the -** [temp_store_directory pragma], though this could change in a future -** release of SQLite. -** With SQLITE_ACCESS_READ, the xAccess method -** checks whether the file is readable. The SQLITE_ACCESS_READ constant is -** currently unused, though it might be used in a future release of -** SQLite. -*/ -enum SQLITE_ACCESS_EXISTS = 0; -enum SQLITE_ACCESS_READWRITE = 1; /* Used by PRAGMA temp_store_directory */ -enum SQLITE_ACCESS_READ = 2; /* Unused */ - -/* -** CAPI3REF: Flags for the xShmLock VFS method -** -** These integer constants define the various locking operations -** allowed by the xShmLock method of [sqlite3_io_methods]. The -** following are the only legal combinations of flags to the -** xShmLock method: -** -** <ul> -** <li> SQLITE_SHM_LOCK | SQLITE_SHM_SHARED -** <li> SQLITE_SHM_LOCK | SQLITE_SHM_EXCLUSIVE -** <li> SQLITE_SHM_UNLOCK | SQLITE_SHM_SHARED -** <li> SQLITE_SHM_UNLOCK | SQLITE_SHM_EXCLUSIVE -** </ul> -** -** When unlocking, the same SHARED or EXCLUSIVE flag must be supplied as -** was given on the corresponding lock. -** -** The xShmLock method can transition between unlocked and SHARED or -** between unlocked and EXCLUSIVE. It cannot transition between SHARED -** and EXCLUSIVE. -*/ -enum SQLITE_SHM_UNLOCK = 1; -enum SQLITE_SHM_LOCK = 2; -enum SQLITE_SHM_SHARED = 4; -enum SQLITE_SHM_EXCLUSIVE = 8; - -/* -** CAPI3REF: Maximum xShmLock index -** -** The xShmLock method on [sqlite3_io_methods] may use values -** between 0 and this upper bound as its "offset" argument. -** The SQLite core will never attempt to acquire or release a -** lock outside of this range -*/ -enum SQLITE_SHM_NLOCK = 8; - -/* -** CAPI3REF: Initialize The SQLite Library -** -** ^The sqlite3_initialize() routine initializes the -** SQLite library. ^The sqlite3_shutdown() routine -** deallocates any resources that were allocated by sqlite3_initialize(). -** These routines are designed to aid in process initialization and -** shutdown on embedded systems. Workstation applications using -** SQLite normally do not need to invoke either of these routines. -** -** A call to sqlite3_initialize() is an "effective" call if it is -** the first time sqlite3_initialize() is invoked during the lifetime of -** the process, or if it is the first time sqlite3_initialize() is invoked -** following a call to sqlite3_shutdown(). ^(Only an effective call -** of sqlite3_initialize() does any initialization. All other calls -** are harmless no-ops.)^ -** -** A call to sqlite3_shutdown() is an "effective" call if it is the first -** call to sqlite3_shutdown() since the last sqlite3_initialize(). ^(Only -** an effective call to sqlite3_shutdown() does any deinitialization. -** All other valid calls to sqlite3_shutdown() are harmless no-ops.)^ -** -** The sqlite3_initialize() interface is threadsafe, but sqlite3_shutdown() -** is not. The sqlite3_shutdown() interface must only be called from a -** single thread. All open [database connections] must be closed and all -** other SQLite resources must be deallocated prior to invoking -** sqlite3_shutdown(). -** -** Among other things, ^sqlite3_initialize() will invoke -** sqlite3_os_init(). Similarly, ^sqlite3_shutdown() -** will invoke sqlite3_os_end(). -** -** ^The sqlite3_initialize() routine returns [SQLITE_OK] on success. -** ^If for some reason, sqlite3_initialize() is unable to initialize -** the library (perhaps it is unable to allocate a needed resource such -** as a mutex) it returns an [error code] other than [SQLITE_OK]. -** -** ^The sqlite3_initialize() routine is called internally by many other -** SQLite interfaces so that an application usually does not need to -** invoke sqlite3_initialize() directly. For example, [sqlite3_open()] -** calls sqlite3_initialize() so the SQLite library will be automatically -** initialized when [sqlite3_open()] is called if it has not be initialized -** already. ^However, if SQLite is compiled with the [SQLITE_OMIT_AUTOINIT] -** compile-time option, then the automatic calls to sqlite3_initialize() -** are omitted and the application must call sqlite3_initialize() directly -** prior to using any other SQLite interface. For maximum portability, -** it is recommended that applications always invoke sqlite3_initialize() -** directly prior to using any other SQLite interface. Future releases -** of SQLite may require this. In other words, the behavior exhibited -** when SQLite is compiled with [SQLITE_OMIT_AUTOINIT] might become the -** default behavior in some future release of SQLite. -** -** The sqlite3_os_init() routine does operating-system specific -** initialization of the SQLite library. The sqlite3_os_end() -** routine undoes the effect of sqlite3_os_init(). Typical tasks -** performed by these routines include allocation or deallocation -** of static resources, initialization of global variables, -** setting up a default [sqlite3_vfs] module, or setting up -** a default configuration using [sqlite3_config()]. -** -** The application should never invoke either sqlite3_os_init() -** or sqlite3_os_end() directly. The application should only invoke -** sqlite3_initialize() and sqlite3_shutdown(). The sqlite3_os_init() -** interface is called automatically by sqlite3_initialize() and -** sqlite3_os_end() is called by sqlite3_shutdown(). Appropriate -** implementations for sqlite3_os_init() and sqlite3_os_end() -** are built into SQLite when it is compiled for Unix, Windows, or OS/2. -** When [custom builds | built for other platforms] -** (using the [SQLITE_OS_OTHER=1] compile-time -** option) the application must supply a suitable implementation for -** sqlite3_os_init() and sqlite3_os_end(). An application-supplied -** implementation of sqlite3_os_init() or sqlite3_os_end() -** must return [SQLITE_OK] on success and some other [error code] upon -** failure. -*/ -int sqlite3_initialize(); -int sqlite3_shutdown(); -int sqlite3_os_init(); -int sqlite3_os_end(); - -/* -** CAPI3REF: Configuring The SQLite Library -** -** The sqlite3_config() interface is used to make global configuration -** changes to SQLite in order to tune SQLite to the specific needs of -** the application. The default configuration is recommended for most -** applications and so this routine is usually not necessary. It is -** provided to support rare applications with unusual needs. -** -** <b>The sqlite3_config() interface is not threadsafe. The application -** must ensure that no other SQLite interfaces are invoked by other -** threads while sqlite3_config() is running.</b> -** -** The sqlite3_config() interface -** may only be invoked prior to library initialization using -** [sqlite3_initialize()] or after shutdown by [sqlite3_shutdown()]. -** ^If sqlite3_config() is called after [sqlite3_initialize()] and before -** [sqlite3_shutdown()] then it will return SQLITE_MISUSE. -** Note, however, that ^sqlite3_config() can be called as part of the -** implementation of an application-defined [sqlite3_os_init()]. -** -** The first argument to sqlite3_config() is an integer -** [configuration option] that determines -** what property of SQLite is to be configured. Subsequent arguments -** vary depending on the [configuration option] -** in the first argument. -** -** ^When a configuration option is set, sqlite3_config() returns [SQLITE_OK]. -** ^If the option is unknown or SQLite is unable to set the option -** then this routine returns a non-zero [error code]. -*/ -int sqlite3_config(int, ...); - -/* -** CAPI3REF: Configure database connections -** METHOD: sqlite3 -** -** The sqlite3_db_config() interface is used to make configuration -** changes to a [database connection]. The interface is similar to -** [sqlite3_config()] except that the changes apply to a single -** [database connection] (specified in the first argument). -** -** The second argument to sqlite3_db_config(D,V,...) is the -** [SQLITE_DBCONFIG_LOOKASIDE | configuration verb] - an integer code -** that indicates what aspect of the [database connection] is being configured. -** Subsequent arguments vary depending on the configuration verb. -** -** ^Calls to sqlite3_db_config() return SQLITE_OK if and only if -** the call is considered successful. -*/ -int sqlite3_db_config(sqlite3*, int op, ...); - -/* -** CAPI3REF: Memory Allocation Routines -** -** An instance of this object defines the interface between SQLite -** and low-level memory allocation routines. -** -** This object is used in only one place in the SQLite interface. -** A pointer to an instance of this object is the argument to -** [sqlite3_config()] when the configuration option is -** [SQLITE_CONFIG_MALLOC] or [SQLITE_CONFIG_GETMALLOC]. -** By creating an instance of this object -** and passing it to [sqlite3_config]([SQLITE_CONFIG_MALLOC]) -** during configuration, an application can specify an alternative -** memory allocation subsystem for SQLite to use for all of its -** dynamic memory needs. -** -** Note that SQLite comes with several [built-in memory allocators] -** that are perfectly adequate for the overwhelming majority of applications -** and that this object is only useful to a tiny minority of applications -** with specialized memory allocation requirements. This object is -** also used during testing of SQLite in order to specify an alternative -** memory allocator that simulates memory out-of-memory conditions in -** order to verify that SQLite recovers gracefully from such -** conditions. -** -** The xMalloc, xRealloc, and xFree methods must work like the -** malloc(), realloc() and free() functions from the standard C library. -** ^SQLite guarantees that the second argument to -** xRealloc is always a value returned by a prior call to xRoundup. -** -** xSize should return the allocated size of a memory allocation -** previously obtained from xMalloc or xRealloc. The allocated size -** is always at least as big as the requested size but may be larger. -** -** The xRoundup method returns what would be the allocated size of -** a memory allocation given a particular requested size. Most memory -** allocators round up memory allocations at least to the next multiple -** of 8. Some allocators round up to a larger multiple or to a power of 2. -** Every memory allocation request coming in through [sqlite3_malloc()] -** or [sqlite3_realloc()] first calls xRoundup. If xRoundup returns 0, -** that causes the corresponding memory allocation to fail. -** -** The xInit method initializes the memory allocator. For example, -** it might allocate any require mutexes or initialize internal data -** structures. The xShutdown method is invoked (indirectly) by -** [sqlite3_shutdown()] and should deallocate any resources acquired -** by xInit. The pAppData pointer is used as the only parameter to -** xInit and xShutdown. -** -** SQLite holds the [SQLITE_MUTEX_STATIC_MASTER] mutex when it invokes -** the xInit method, so the xInit method need not be threadsafe. The -** xShutdown method is only called from [sqlite3_shutdown()] so it does -** not need to be threadsafe either. For all other methods, SQLite -** holds the [SQLITE_MUTEX_STATIC_MEM] mutex as long as the -** [SQLITE_CONFIG_MEMSTATUS] configuration option is turned on (which -** it is by default) and so the methods are automatically serialized. -** However, if [SQLITE_CONFIG_MEMSTATUS] is disabled, then the other -** methods must be threadsafe or else make their own arrangements for -** serialization. -** -** SQLite will never invoke xInit() more than once without an intervening -** call to xShutdown(). -*/ -struct sqlite3_mem_methods -{ - void* function(int) xMalloc; /* Memory allocation function */ - void function(void*) xFree; /* Free a prior allocation */ - void* function(void*, int) xRealloc; /* Resize an allocation */ - int function(void*) xSize; /* Return the size of an allocation */ - int function(int) xRoundup; /* Round up request size to allocation size */ - int function(void*) xInit; /* Initialize the memory allocator */ - void function(void*) xShutdown; /* Deinitialize the memory allocator */ - void* pAppData; /* Argument to xInit() and xShutdown() */ -} - -/* -** CAPI3REF: Configuration Options -** KEYWORDS: {configuration option} -** -** These constants are the available integer configuration options that -** can be passed as the first argument to the [sqlite3_config()] interface. -** -** New configuration options may be added in future releases of SQLite. -** Existing configuration options might be discontinued. Applications -** should check the return code from [sqlite3_config()] to make sure that -** the call worked. The [sqlite3_config()] interface will return a -** non-zero [error code] if a discontinued or unsupported configuration option -** is invoked. -** -** <dl> -** [[SQLITE_CONFIG_SINGLETHREAD]] <dt>SQLITE_CONFIG_SINGLETHREAD</dt> -** <dd>There are no arguments to this option. ^This option sets the -** [threading mode] to Single-thread. In other words, it disables -** all mutexing and puts SQLite into a mode where it can only be used -** by a single thread. ^If SQLite is compiled with -** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then -** it is not possible to change the [threading mode] from its default -** value of Single-thread and so [sqlite3_config()] will return -** [SQLITE_ERROR] if called with the SQLITE_CONFIG_SINGLETHREAD -** configuration option.</dd> -** -** [[SQLITE_CONFIG_MULTITHREAD]] <dt>SQLITE_CONFIG_MULTITHREAD</dt> -** <dd>There are no arguments to this option. ^This option sets the -** [threading mode] to Multi-thread. In other words, it disables -** mutexing on [database connection] and [prepared statement] objects. -** The application is responsible for serializing access to -** [database connections] and [prepared statements]. But other mutexes -** are enabled so that SQLite will be safe to use in a multi-threaded -** environment as long as no two threads attempt to use the same -** [database connection] at the same time. ^If SQLite is compiled with -** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then -** it is not possible to set the Multi-thread [threading mode] and -** [sqlite3_config()] will return [SQLITE_ERROR] if called with the -** SQLITE_CONFIG_MULTITHREAD configuration option.</dd> -** -** [[SQLITE_CONFIG_SERIALIZED]] <dt>SQLITE_CONFIG_SERIALIZED</dt> -** <dd>There are no arguments to this option. ^This option sets the -** [threading mode] to Serialized. In other words, this option enables -** all mutexes including the recursive -** mutexes on [database connection] and [prepared statement] objects. -** In this mode (which is the default when SQLite is compiled with -** [SQLITE_THREADSAFE=1]) the SQLite library will itself serialize access -** to [database connections] and [prepared statements] so that the -** application is free to use the same [database connection] or the -** same [prepared statement] in different threads at the same time. -** ^If SQLite is compiled with -** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then -** it is not possible to set the Serialized [threading mode] and -** [sqlite3_config()] will return [SQLITE_ERROR] if called with the -** SQLITE_CONFIG_SERIALIZED configuration option.</dd> -** -** [[SQLITE_CONFIG_MALLOC]] <dt>SQLITE_CONFIG_MALLOC</dt> -** <dd> ^(The SQLITE_CONFIG_MALLOC option takes a single argument which is -** a pointer to an instance of the [sqlite3_mem_methods] structure. -** The argument specifies -** alternative low-level memory allocation routines to be used in place of -** the memory allocation routines built into SQLite.)^ ^SQLite makes -** its own private copy of the content of the [sqlite3_mem_methods] structure -** before the [sqlite3_config()] call returns.</dd> -** -** [[SQLITE_CONFIG_GETMALLOC]] <dt>SQLITE_CONFIG_GETMALLOC</dt> -** <dd> ^(The SQLITE_CONFIG_GETMALLOC option takes a single argument which -** is a pointer to an instance of the [sqlite3_mem_methods] structure. -** The [sqlite3_mem_methods] -** structure is filled with the currently defined memory allocation routines.)^ -** This option can be used to overload the default memory allocation -** routines with a wrapper that simulations memory allocation failure or -** tracks memory usage, for example. </dd> -** -** [[SQLITE_CONFIG_SMALL_MALLOC]] <dt>SQLITE_CONFIG_SMALL_MALLOC</dt> -** <dd> ^The SQLITE_CONFIG_SMALL_MALLOC option takes single argument of -** type int, interpreted as a boolean, which if true provides a hint to -** SQLite that it should avoid large memory allocations if possible. -** SQLite will run faster if it is free to make large memory allocations, -** but some application might prefer to run slower in exchange for -** guarantees about memory fragmentation that are possible if large -** allocations are avoided. This hint is normally off. -** </dd> -** -** [[SQLITE_CONFIG_MEMSTATUS]] <dt>SQLITE_CONFIG_MEMSTATUS</dt> -** <dd> ^The SQLITE_CONFIG_MEMSTATUS option takes single argument of type int, -** interpreted as a boolean, which enables or disables the collection of -** memory allocation statistics. ^(When memory allocation statistics are -** disabled, the following SQLite interfaces become non-operational: -** <ul> -** <li> [sqlite3_memory_used()] -** <li> [sqlite3_memory_highwater()] -** <li> [sqlite3_soft_heap_limit64()] -** <li> [sqlite3_status64()] -** </ul>)^ -** ^Memory allocation statistics are enabled by default unless SQLite is -** compiled with [SQLITE_DEFAULT_MEMSTATUS]=0 in which case memory -** allocation statistics are disabled by default. -** </dd> -** -** [[SQLITE_CONFIG_SCRATCH]] <dt>SQLITE_CONFIG_SCRATCH</dt> -** <dd> The SQLITE_CONFIG_SCRATCH option is no longer used. -** </dd> -** -** [[SQLITE_CONFIG_PAGECACHE]] <dt>SQLITE_CONFIG_PAGECACHE</dt> -** <dd> ^The SQLITE_CONFIG_PAGECACHE option specifies a memory pool -** that SQLite can use for the database page cache with the default page -** cache implementation. -** This configuration option is a no-op if an application-define page -** cache implementation is loaded using the [SQLITE_CONFIG_PCACHE2]. -** ^There are three arguments to SQLITE_CONFIG_PAGECACHE: A pointer to -** 8-byte aligned memory (pMem), the size of each page cache line (sz), -** and the number of cache lines (N). -** The sz argument should be the size of the largest database page -** (a power of two between 512 and 65536) plus some extra bytes for each -** page header. ^The number of extra bytes needed by the page header -** can be determined using [SQLITE_CONFIG_PCACHE_HDRSZ]. -** ^It is harmless, apart from the wasted memory, -** for the sz parameter to be larger than necessary. The pMem -** argument must be either a NULL pointer or a pointer to an 8-byte -** aligned block of memory of at least sz*N bytes, otherwise -** subsequent behavior is undefined. -** ^When pMem is not NULL, SQLite will strive to use the memory provided -** to satisfy page cache needs, falling back to [sqlite3_malloc()] if -** a page cache line is larger than sz bytes or if all of the pMem buffer -** is exhausted. -** ^If pMem is NULL and N is non-zero, then each database connection -** does an initial bulk allocation for page cache memory -** from [sqlite3_malloc()] sufficient for N cache lines if N is positive or -** of -1024*N bytes if N is negative, . ^If additional -** page cache memory is needed beyond what is provided by the initial -** allocation, then SQLite goes to [sqlite3_malloc()] separately for each -** additional cache line. </dd> -** -** [[SQLITE_CONFIG_HEAP]] <dt>SQLITE_CONFIG_HEAP</dt> -** <dd> ^The SQLITE_CONFIG_HEAP option specifies a static memory buffer -** that SQLite will use for all of its dynamic memory allocation needs -** beyond those provided for by [SQLITE_CONFIG_PAGECACHE]. -** ^The SQLITE_CONFIG_HEAP option is only available if SQLite is compiled -** with either [SQLITE_ENABLE_MEMSYS3] or [SQLITE_ENABLE_MEMSYS5] and returns -** [SQLITE_ERROR] if invoked otherwise. -** ^There are three arguments to SQLITE_CONFIG_HEAP: -** An 8-byte aligned pointer to the memory, -** the number of bytes in the memory buffer, and the minimum allocation size. -** ^If the first pointer (the memory pointer) is NULL, then SQLite reverts -** to using its default memory allocator (the system malloc() implementation), -** undoing any prior invocation of [SQLITE_CONFIG_MALLOC]. ^If the -** memory pointer is not NULL then the alternative memory -** allocator is engaged to handle all of SQLites memory allocation needs. -** The first pointer (the memory pointer) must be aligned to an 8-byte -** boundary or subsequent behavior of SQLite will be undefined. -** The minimum allocation size is capped at 2**12. Reasonable values -** for the minimum allocation size are 2**5 through 2**8.</dd> -** -** [[SQLITE_CONFIG_MUTEX]] <dt>SQLITE_CONFIG_MUTEX</dt> -** <dd> ^(The SQLITE_CONFIG_MUTEX option takes a single argument which is a -** pointer to an instance of the [sqlite3_mutex_methods] structure. -** The argument specifies alternative low-level mutex routines to be used -** in place the mutex routines built into SQLite.)^ ^SQLite makes a copy of -** the content of the [sqlite3_mutex_methods] structure before the call to -** [sqlite3_config()] returns. ^If SQLite is compiled with -** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then -** the entire mutexing subsystem is omitted from the build and hence calls to -** [sqlite3_config()] with the SQLITE_CONFIG_MUTEX configuration option will -** return [SQLITE_ERROR].</dd> -** -** [[SQLITE_CONFIG_GETMUTEX]] <dt>SQLITE_CONFIG_GETMUTEX</dt> -** <dd> ^(The SQLITE_CONFIG_GETMUTEX option takes a single argument which -** is a pointer to an instance of the [sqlite3_mutex_methods] structure. The -** [sqlite3_mutex_methods] -** structure is filled with the currently defined mutex routines.)^ -** This option can be used to overload the default mutex allocation -** routines with a wrapper used to track mutex usage for performance -** profiling or testing, for example. ^If SQLite is compiled with -** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then -** the entire mutexing subsystem is omitted from the build and hence calls to -** [sqlite3_config()] with the SQLITE_CONFIG_GETMUTEX configuration option will -** return [SQLITE_ERROR].</dd> -** -** [[SQLITE_CONFIG_LOOKASIDE]] <dt>SQLITE_CONFIG_LOOKASIDE</dt> -** <dd> ^(The SQLITE_CONFIG_LOOKASIDE option takes two arguments that determine -** the default size of lookaside memory on each [database connection]. -** The first argument is the -** size of each lookaside buffer slot and the second is the number of -** slots allocated to each database connection.)^ ^(SQLITE_CONFIG_LOOKASIDE -** sets the <i>default</i> lookaside size. The [SQLITE_DBCONFIG_LOOKASIDE] -** option to [sqlite3_db_config()] can be used to change the lookaside -** configuration on individual connections.)^ </dd> -** -** [[SQLITE_CONFIG_PCACHE2]] <dt>SQLITE_CONFIG_PCACHE2</dt> -** <dd> ^(The SQLITE_CONFIG_PCACHE2 option takes a single argument which is -** a pointer to an [sqlite3_pcache_methods2] object. This object specifies -** the interface to a custom page cache implementation.)^ -** ^SQLite makes a copy of the [sqlite3_pcache_methods2] object.</dd> -** -** [[SQLITE_CONFIG_GETPCACHE2]] <dt>SQLITE_CONFIG_GETPCACHE2</dt> -** <dd> ^(The SQLITE_CONFIG_GETPCACHE2 option takes a single argument which -** is a pointer to an [sqlite3_pcache_methods2] object. SQLite copies of -** the current page cache implementation into that object.)^ </dd> -** -** [[SQLITE_CONFIG_LOG]] <dt>SQLITE_CONFIG_LOG</dt> -** <dd> The SQLITE_CONFIG_LOG option is used to configure the SQLite -** global [error log]. -** (^The SQLITE_CONFIG_LOG option takes two arguments: a pointer to a -** function with a call signature of void(*)(void*,int,const char*), -** and a pointer to void. ^If the function pointer is not NULL, it is -** invoked by [sqlite3_log()] to process each logging event. ^If the -** function pointer is NULL, the [sqlite3_log()] interface becomes a no-op. -** ^The void pointer that is the second argument to SQLITE_CONFIG_LOG is -** passed through as the first parameter to the application-defined logger -** function whenever that function is invoked. ^The second parameter to -** the logger function is a copy of the first parameter to the corresponding -** [sqlite3_log()] call and is intended to be a [result code] or an -** [extended result code]. ^The third parameter passed to the logger is -** log message after formatting via [sqlite3_snprintf()]. -** The SQLite logging interface is not reentrant; the logger function -** supplied by the application must not invoke any SQLite interface. -** In a multi-threaded application, the application-defined logger -** function must be threadsafe. </dd> -** -** [[SQLITE_CONFIG_URI]] <dt>SQLITE_CONFIG_URI -** <dd>^(The SQLITE_CONFIG_URI option takes a single argument of type int. -** If non-zero, then URI handling is globally enabled. If the parameter is zero, -** then URI handling is globally disabled.)^ ^If URI handling is globally -** enabled, all filenames passed to [sqlite3_open()], [sqlite3_open_v2()], -** [sqlite3_open16()] or -** specified as part of [ATTACH] commands are interpreted as URIs, regardless -** of whether or not the [SQLITE_OPEN_URI] flag is set when the database -** connection is opened. ^If it is globally disabled, filenames are -** only interpreted as URIs if the SQLITE_OPEN_URI flag is set when the -** database connection is opened. ^(By default, URI handling is globally -** disabled. The default value may be changed by compiling with the -** [SQLITE_USE_URI] symbol defined.)^ -** -** [[SQLITE_CONFIG_COVERING_INDEX_SCAN]] <dt>SQLITE_CONFIG_COVERING_INDEX_SCAN -** <dd>^The SQLITE_CONFIG_COVERING_INDEX_SCAN option takes a single integer -** argument which is interpreted as a boolean in order to enable or disable -** the use of covering indices for full table scans in the query optimizer. -** ^The default setting is determined -** by the [SQLITE_ALLOW_COVERING_INDEX_SCAN] compile-time option, or is "on" -** if that compile-time option is omitted. -** The ability to disable the use of covering indices for full table scans -** is because some incorrectly coded legacy applications might malfunction -** when the optimization is enabled. Providing the ability to -** disable the optimization allows the older, buggy application code to work -** without change even with newer versions of SQLite. -** -** [[SQLITE_CONFIG_PCACHE]] [[SQLITE_CONFIG_GETPCACHE]] -** <dt>SQLITE_CONFIG_PCACHE and SQLITE_CONFIG_GETPCACHE -** <dd> These options are obsolete and should not be used by new code. -** They are retained for backwards compatibility but are now no-ops. -** </dd> -** -** [[SQLITE_CONFIG_SQLLOG]] -** <dt>SQLITE_CONFIG_SQLLOG -** <dd>This option is only available if sqlite is compiled with the -** [SQLITE_ENABLE_SQLLOG] pre-processor macro defined. The first argument should -** be a pointer to a function of type void(*)(void*,sqlite3*,const char*, int). -** The second should be of type (void*). The callback is invoked by the library -** in three separate circumstances, identified by the value passed as the -** fourth parameter. If the fourth parameter is 0, then the database connection -** passed as the second argument has just been opened. The third argument -** points to a buffer containing the name of the main database file. If the -** fourth parameter is 1, then the SQL statement that the third parameter -** points to has just been executed. Or, if the fourth parameter is 2, then -** the connection being passed as the second parameter is being closed. The -** third parameter is passed NULL In this case. An example of using this -** configuration option can be seen in the "test_sqllog.c" source file in -** the canonical SQLite source tree.</dd> -** -** [[SQLITE_CONFIG_MMAP_SIZE]] -** <dt>SQLITE_CONFIG_MMAP_SIZE -** <dd>^SQLITE_CONFIG_MMAP_SIZE takes two 64-bit integer (sqlite3_int64) values -** that are the default mmap size limit (the default setting for -** [PRAGMA mmap_size]) and the maximum allowed mmap size limit. -** ^The default setting can be overridden by each database connection using -** either the [PRAGMA mmap_size] command, or by using the -** [SQLITE_FCNTL_MMAP_SIZE] file control. ^(The maximum allowed mmap size -** will be silently truncated if necessary so that it does not exceed the -** compile-time maximum mmap size set by the -** [SQLITE_MAX_MMAP_SIZE] compile-time option.)^ -** ^If either argument to this option is negative, then that argument is -** changed to its compile-time default. -** -** [[SQLITE_CONFIG_WIN32_HEAPSIZE]] -** <dt>SQLITE_CONFIG_WIN32_HEAPSIZE -** <dd>^The SQLITE_CONFIG_WIN32_HEAPSIZE option is only available if SQLite is -** compiled for Windows with the [SQLITE_WIN32_MALLOC] pre-processor macro -** defined. ^SQLITE_CONFIG_WIN32_HEAPSIZE takes a 32-bit unsigned integer value -** that specifies the maximum size of the created heap. -** -** [[SQLITE_CONFIG_PCACHE_HDRSZ]] -** <dt>SQLITE_CONFIG_PCACHE_HDRSZ -** <dd>^The SQLITE_CONFIG_PCACHE_HDRSZ option takes a single parameter which -** is a pointer to an integer and writes into that integer the number of extra -** bytes per page required for each page in [SQLITE_CONFIG_PAGECACHE]. -** The amount of extra space required can change depending on the compiler, -** target platform, and SQLite version. -** -** [[SQLITE_CONFIG_PMASZ]] -** <dt>SQLITE_CONFIG_PMASZ -** <dd>^The SQLITE_CONFIG_PMASZ option takes a single parameter which -** is an unsigned integer and sets the "Minimum PMA Size" for the multithreaded -** sorter to that integer. The default minimum PMA Size is set by the -** [SQLITE_SORTER_PMASZ] compile-time option. New threads are launched -** to help with sort operations when multithreaded sorting -** is enabled (using the [PRAGMA threads] command) and the amount of content -** to be sorted exceeds the page size times the minimum of the -** [PRAGMA cache_size] setting and this value. -** -** [[SQLITE_CONFIG_STMTJRNL_SPILL]] -** <dt>SQLITE_CONFIG_STMTJRNL_SPILL -** <dd>^The SQLITE_CONFIG_STMTJRNL_SPILL option takes a single parameter which -** becomes the [statement journal] spill-to-disk threshold. -** [Statement journals] are held in memory until their size (in bytes) -** exceeds this threshold, at which point they are written to disk. -** Or if the threshold is -1, statement journals are always held -** exclusively in memory. -** Since many statement journals never become large, setting the spill -** threshold to a value such as 64KiB can greatly reduce the amount of -** I/O required to support statement rollback. -** The default value for this setting is controlled by the -** [SQLITE_STMTJRNL_SPILL] compile-time option. -** -** [[SQLITE_CONFIG_SORTERREF_SIZE]] -** <dt>SQLITE_CONFIG_SORTERREF_SIZE -** <dd>The SQLITE_CONFIG_SORTERREF_SIZE option accepts a single parameter -** of type (int) - the new value of the sorter-reference size threshold. -** Usually, when SQLite uses an external sort to order records according -** to an ORDER BY clause, all fields required by the caller are present in the -** sorted records. However, if SQLite determines based on the declared type -** of a table column that its values are likely to be very large - larger -** than the configured sorter-reference size threshold - then a reference -** is stored in each sorted record and the required column values loaded -** from the database as records are returned in sorted order. The default -** value for this option is to never use this optimization. Specifying a -** negative value for this option restores the default behaviour. -** This option is only available if SQLite is compiled with the -** [SQLITE_ENABLE_SORTER_REFERENCES] compile-time option. -** </dl> -*/ -enum SQLITE_CONFIG_SINGLETHREAD = 1; /* nil */ -enum SQLITE_CONFIG_MULTITHREAD = 2; /* nil */ -enum SQLITE_CONFIG_SERIALIZED = 3; /* nil */ -enum SQLITE_CONFIG_MALLOC = 4; /* sqlite3_mem_methods* */ -enum SQLITE_CONFIG_GETMALLOC = 5; /* sqlite3_mem_methods* */ -enum SQLITE_CONFIG_SCRATCH = 6; /* No longer used */ -enum SQLITE_CONFIG_PAGECACHE = 7; /* void*, int sz, int N */ -enum SQLITE_CONFIG_HEAP = 8; /* void*, int nByte, int min */ -enum SQLITE_CONFIG_MEMSTATUS = 9; /* boolean */ -enum SQLITE_CONFIG_MUTEX = 10; /* sqlite3_mutex_methods* */ -enum SQLITE_CONFIG_GETMUTEX = 11; /* sqlite3_mutex_methods* */ -/* previously SQLITE_CONFIG_CHUNKALLOC 12 which is now unused. */ -enum SQLITE_CONFIG_LOOKASIDE = 13; /* int int */ -enum SQLITE_CONFIG_PCACHE = 14; /* no-op */ -enum SQLITE_CONFIG_GETPCACHE = 15; /* no-op */ -enum SQLITE_CONFIG_LOG = 16; /* xFunc, void* */ -enum SQLITE_CONFIG_URI = 17; /* int */ -enum SQLITE_CONFIG_PCACHE2 = 18; /* sqlite3_pcache_methods2* */ -enum SQLITE_CONFIG_GETPCACHE2 = 19; /* sqlite3_pcache_methods2* */ -enum SQLITE_CONFIG_COVERING_INDEX_SCAN = 20; /* int */ -enum SQLITE_CONFIG_SQLLOG = 21; /* xSqllog, void* */ -enum SQLITE_CONFIG_MMAP_SIZE = 22; /* sqlite3_int64, sqlite3_int64 */ -enum SQLITE_CONFIG_WIN32_HEAPSIZE = 23; /* int nByte */ -enum SQLITE_CONFIG_PCACHE_HDRSZ = 24; /* int *psz */ -enum SQLITE_CONFIG_PMASZ = 25; /* unsigned int szPma */ -enum SQLITE_CONFIG_STMTJRNL_SPILL = 26; /* int nByte */ -enum SQLITE_CONFIG_SMALL_MALLOC = 27; /* boolean */ -enum SQLITE_CONFIG_SORTERREF_SIZE = 28; /* int nByte */ - -/* -** CAPI3REF: Database Connection Configuration Options -** -** These constants are the available integer configuration options that -** can be passed as the second argument to the [sqlite3_db_config()] interface. -** -** New configuration options may be added in future releases of SQLite. -** Existing configuration options might be discontinued. Applications -** should check the return code from [sqlite3_db_config()] to make sure that -** the call worked. ^The [sqlite3_db_config()] interface will return a -** non-zero [error code] if a discontinued or unsupported configuration option -** is invoked. -** -** <dl> -** <dt>SQLITE_DBCONFIG_LOOKASIDE</dt> -** <dd> ^This option takes three additional arguments that determine the -** [lookaside memory allocator] configuration for the [database connection]. -** ^The first argument (the third parameter to [sqlite3_db_config()] is a -** pointer to a memory buffer to use for lookaside memory. -** ^The first argument after the SQLITE_DBCONFIG_LOOKASIDE verb -** may be NULL in which case SQLite will allocate the -** lookaside buffer itself using [sqlite3_malloc()]. ^The second argument is the -** size of each lookaside buffer slot. ^The third argument is the number of -** slots. The size of the buffer in the first argument must be greater than -** or equal to the product of the second and third arguments. The buffer -** must be aligned to an 8-byte boundary. ^If the second argument to -** SQLITE_DBCONFIG_LOOKASIDE is not a multiple of 8, it is internally -** rounded down to the next smaller multiple of 8. ^(The lookaside memory -** configuration for a database connection can only be changed when that -** connection is not currently using lookaside memory, or in other words -** when the "current value" returned by -** [sqlite3_db_status](D,[SQLITE_CONFIG_LOOKASIDE],...) is zero. -** Any attempt to change the lookaside memory configuration when lookaside -** memory is in use leaves the configuration unchanged and returns -** [SQLITE_BUSY].)^</dd> -** -** <dt>SQLITE_DBCONFIG_ENABLE_FKEY</dt> -** <dd> ^This option is used to enable or disable the enforcement of -** [foreign key constraints]. There should be two additional arguments. -** The first argument is an integer which is 0 to disable FK enforcement, -** positive to enable FK enforcement or negative to leave FK enforcement -** unchanged. The second parameter is a pointer to an integer into which -** is written 0 or 1 to indicate whether FK enforcement is off or on -** following this call. The second parameter may be a NULL pointer, in -** which case the FK enforcement setting is not reported back. </dd> -** -** <dt>SQLITE_DBCONFIG_ENABLE_TRIGGER</dt> -** <dd> ^This option is used to enable or disable [CREATE TRIGGER | triggers]. -** There should be two additional arguments. -** The first argument is an integer which is 0 to disable triggers, -** positive to enable triggers or negative to leave the setting unchanged. -** The second parameter is a pointer to an integer into which -** is written 0 or 1 to indicate whether triggers are disabled or enabled -** following this call. The second parameter may be a NULL pointer, in -** which case the trigger setting is not reported back. </dd> -** -** <dt>SQLITE_DBCONFIG_ENABLE_FTS3_TOKENIZER</dt> -** <dd> ^This option is used to enable or disable the two-argument -** version of the [fts3_tokenizer()] function which is part of the -** [FTS3] full-text search engine extension. -** There should be two additional arguments. -** The first argument is an integer which is 0 to disable fts3_tokenizer() or -** positive to enable fts3_tokenizer() or negative to leave the setting -** unchanged. -** The second parameter is a pointer to an integer into which -** is written 0 or 1 to indicate whether fts3_tokenizer is disabled or enabled -** following this call. The second parameter may be a NULL pointer, in -** which case the new setting is not reported back. </dd> -** -** <dt>SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION</dt> -** <dd> ^This option is used to enable or disable the [sqlite3_load_extension()] -** interface independently of the [load_extension()] SQL function. -** The [sqlite3_enable_load_extension()] API enables or disables both the -** C-API [sqlite3_load_extension()] and the SQL function [load_extension()]. -** There should be two additional arguments. -** When the first argument to this interface is 1, then only the C-API is -** enabled and the SQL function remains disabled. If the first argument to -** this interface is 0, then both the C-API and the SQL function are disabled. -** If the first argument is -1, then no changes are made to state of either the -** C-API or the SQL function. -** The second parameter is a pointer to an integer into which -** is written 0 or 1 to indicate whether [sqlite3_load_extension()] interface -** is disabled or enabled following this call. The second parameter may -** be a NULL pointer, in which case the new setting is not reported back. -** </dd> -** -** <dt>SQLITE_DBCONFIG_MAINDBNAME</dt> -** <dd> ^This option is used to change the name of the "main" database -** schema. ^The sole argument is a pointer to a constant UTF8 string -** which will become the new schema name in place of "main". ^SQLite -** does not make a copy of the new main schema name string, so the application -** must ensure that the argument passed into this DBCONFIG option is unchanged -** until after the database connection closes. -** </dd> -** -** <dt>SQLITE_DBCONFIG_NO_CKPT_ON_CLOSE</dt> -** <dd> Usually, when a database in wal mode is closed or detached from a -** database handle, SQLite checks if this will mean that there are now no -** connections at all to the database. If so, it performs a checkpoint -** operation before closing the connection. This option may be used to -** override this behaviour. The first parameter passed to this operation -** is an integer - positive to disable checkpoints-on-close, or zero (the -** default) to enable them, and negative to leave the setting unchanged. -** The second parameter is a pointer to an integer -** into which is written 0 or 1 to indicate whether checkpoints-on-close -** have been disabled - 0 if they are not disabled, 1 if they are. -** </dd> -** -** <dt>SQLITE_DBCONFIG_ENABLE_QPSG</dt> -** <dd>^(The SQLITE_DBCONFIG_ENABLE_QPSG option activates or deactivates -** the [query planner stability guarantee] (QPSG). When the QPSG is active, -** a single SQL query statement will always use the same algorithm regardless -** of values of [bound parameters].)^ The QPSG disables some query optimizations -** that look at the values of bound parameters, which can make some queries -** slower. But the QPSG has the advantage of more predictable behavior. With -** the QPSG active, SQLite will always use the same query plan in the field as -** was used during testing in the lab. -** The first argument to this setting is an integer which is 0 to disable -** the QPSG, positive to enable QPSG, or negative to leave the setting -** unchanged. The second parameter is a pointer to an integer into which -** is written 0 or 1 to indicate whether the QPSG is disabled or enabled -** following this call. -** </dd> -** -** <dt>SQLITE_DBCONFIG_TRIGGER_EQP</dt> -** <dd> By default, the output of EXPLAIN QUERY PLAN commands does not -** include output for any operations performed by trigger programs. This -** option is used to set or clear (the default) a flag that governs this -** behavior. The first parameter passed to this operation is an integer - -** positive to enable output for trigger programs, or zero to disable it, -** or negative to leave the setting unchanged. -** The second parameter is a pointer to an integer into which is written -** 0 or 1 to indicate whether output-for-triggers has been disabled - 0 if -** it is not disabled, 1 if it is. -** </dd> -** -** <dt>SQLITE_DBCONFIG_RESET_DATABASE</dt> -** <dd> Set the SQLITE_DBCONFIG_RESET_DATABASE flag and then run -** [VACUUM] in order to reset a database back to an empty database -** with no schema and no content. The following process works even for -** a badly corrupted database file: -** <ol> -** <li> If the database connection is newly opened, make sure it has read the -** database schema by preparing then discarding some query against the -** database, or calling sqlite3_table_column_metadata(), ignoring any -** errors. This step is only necessary if the application desires to keep -** the database in WAL mode after the reset if it was in WAL mode before -** the reset. -** <li> sqlite3_db_config(db, SQLITE_DBCONFIG_RESET_DATABASE, 1, 0); -** <li> [sqlite3_exec](db, "[VACUUM]", 0, 0, 0); -** <li> sqlite3_db_config(db, SQLITE_DBCONFIG_RESET_DATABASE, 0, 0); -** </ol> -** Because resetting a database is destructive and irreversible, the -** process requires the use of this obscure API and multiple steps to help -** ensure that it does not happen by accident. -** </dd> -** </dl> -*/ -enum SQLITE_DBCONFIG_MAINDBNAME = 1000; /* const char* */ -enum SQLITE_DBCONFIG_LOOKASIDE = 1001; /* void* int int */ -enum SQLITE_DBCONFIG_ENABLE_FKEY = 1002; /* int int* */ -enum SQLITE_DBCONFIG_ENABLE_TRIGGER = 1003; /* int int* */ -enum SQLITE_DBCONFIG_ENABLE_FTS3_TOKENIZER = 1004; /* int int* */ -enum SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION = 1005; /* int int* */ -enum SQLITE_DBCONFIG_NO_CKPT_ON_CLOSE = 1006; /* int int* */ -enum SQLITE_DBCONFIG_ENABLE_QPSG = 1007; /* int int* */ -enum SQLITE_DBCONFIG_TRIGGER_EQP = 1008; /* int int* */ -enum SQLITE_DBCONFIG_RESET_DATABASE = 1009; /* int int* */ -enum SQLITE_DBCONFIG_MAX = 1009; /* Largest DBCONFIG */ - -/* -** CAPI3REF: Enable Or Disable Extended Result Codes -** METHOD: sqlite3 -** -** ^The sqlite3_extended_result_codes() routine enables or disables the -** [extended result codes] feature of SQLite. ^The extended result -** codes are disabled by default for historical compatibility. -*/ -int sqlite3_extended_result_codes(sqlite3*, int onoff); - -/* -** CAPI3REF: Last Insert Rowid -** METHOD: sqlite3 -** -** ^Each entry in most SQLite tables (except for [WITHOUT ROWID] tables) -** has a unique 64-bit signed -** integer key called the [ROWID | "rowid"]. ^The rowid is always available -** as an undeclared column named ROWID, OID, or _ROWID_ as long as those -** names are not also used by explicitly declared columns. ^If -** the table has a column of type [INTEGER PRIMARY KEY] then that column -** is another alias for the rowid. -** -** ^The sqlite3_last_insert_rowid(D) interface usually returns the [rowid] of -** the most recent successful [INSERT] into a rowid table or [virtual table] -** on database connection D. ^Inserts into [WITHOUT ROWID] tables are not -** recorded. ^If no successful [INSERT]s into rowid tables have ever occurred -** on the database connection D, then sqlite3_last_insert_rowid(D) returns -** zero. -** -** As well as being set automatically as rows are inserted into database -** tables, the value returned by this function may be set explicitly by -** [sqlite3_set_last_insert_rowid()] -** -** Some virtual table implementations may INSERT rows into rowid tables as -** part of committing a transaction (e.g. to flush data accumulated in memory -** to disk). In this case subsequent calls to this function return the rowid -** associated with these internal INSERT operations, which leads to -** unintuitive results. Virtual table implementations that do write to rowid -** tables in this way can avoid this problem by restoring the original -** rowid value using [sqlite3_set_last_insert_rowid()] before returning -** control to the user. -** -** ^(If an [INSERT] occurs within a trigger then this routine will -** return the [rowid] of the inserted row as long as the trigger is -** running. Once the trigger program ends, the value returned -** by this routine reverts to what it was before the trigger was fired.)^ -** -** ^An [INSERT] that fails due to a constraint violation is not a -** successful [INSERT] and does not change the value returned by this -** routine. ^Thus INSERT OR FAIL, INSERT OR IGNORE, INSERT OR ROLLBACK, -** and INSERT OR ABORT make no changes to the return value of this -** routine when their insertion fails. ^(When INSERT OR REPLACE -** encounters a constraint violation, it does not fail. The -** INSERT continues to completion after deleting rows that caused -** the constraint problem so INSERT OR REPLACE will always change -** the return value of this interface.)^ -** -** ^For the purposes of this routine, an [INSERT] is considered to -** be successful even if it is subsequently rolled back. -** -** This function is accessible to SQL statements via the -** [last_insert_rowid() SQL function]. -** -** If a separate thread performs a new [INSERT] on the same -** database connection while the [sqlite3_last_insert_rowid()] -** function is running and thus changes the last insert [rowid], -** then the value returned by [sqlite3_last_insert_rowid()] is -** unpredictable and might not equal either the old or the new -** last insert [rowid]. -*/ -sqlite3_int64 sqlite3_last_insert_rowid(sqlite3*); - -/* -** CAPI3REF: Set the Last Insert Rowid value. -** METHOD: sqlite3 -** -** The sqlite3_set_last_insert_rowid(D, R) method allows the application to -** set the value returned by calling sqlite3_last_insert_rowid(D) to R -** without inserting a row into the database. -*/ -void sqlite3_set_last_insert_rowid(sqlite3*, sqlite3_int64); - -/* -** CAPI3REF: Count The Number Of Rows Modified -** METHOD: sqlite3 -** -** ^This function returns the number of rows modified, inserted or -** deleted by the most recently completed INSERT, UPDATE or DELETE -** statement on the database connection specified by the only parameter. -** ^Executing any other type of SQL statement does not modify the value -** returned by this function. -** -** ^Only changes made directly by the INSERT, UPDATE or DELETE statement are -** considered - auxiliary changes caused by [CREATE TRIGGER | triggers], -** [foreign key actions] or [REPLACE] constraint resolution are not counted. -** -** Changes to a view that are intercepted by -** [INSTEAD OF trigger | INSTEAD OF triggers] are not counted. ^The value -** returned by sqlite3_changes() immediately after an INSERT, UPDATE or -** DELETE statement run on a view is always zero. Only changes made to real -** tables are counted. -** -** Things are more complicated if the sqlite3_changes() function is -** executed while a trigger program is running. This may happen if the -** program uses the [changes() SQL function], or if some other callback -** function invokes sqlite3_changes() directly. Essentially: -** -** <ul> -** <li> ^(Before entering a trigger program the value returned by -** sqlite3_changes() function is saved. After the trigger program -** has finished, the original value is restored.)^ -** -** <li> ^(Within a trigger program each INSERT, UPDATE and DELETE -** statement sets the value returned by sqlite3_changes() -** upon completion as normal. Of course, this value will not include -** any changes performed by sub-triggers, as the sqlite3_changes() -** value will be saved and restored after each sub-trigger has run.)^ -** </ul> -** -** ^This means that if the changes() SQL function (or similar) is used -** by the first INSERT, UPDATE or DELETE statement within a trigger, it -** returns the value as set when the calling statement began executing. -** ^If it is used by the second or subsequent such statement within a trigger -** program, the value returned reflects the number of rows modified by the -** previous INSERT, UPDATE or DELETE statement within the same trigger. -** -** If a separate thread makes changes on the same database connection -** while [sqlite3_changes()] is running then the value returned -** is unpredictable and not meaningful. -** -** See also: -** <ul> -** <li> the [sqlite3_total_changes()] interface -** <li> the [count_changes pragma] -** <li> the [changes() SQL function] -** <li> the [data_version pragma] -** </ul> -*/ -int sqlite3_changes(sqlite3*); - -/* -** CAPI3REF: Total Number Of Rows Modified -** METHOD: sqlite3 -** -** ^This function returns the total number of rows inserted, modified or -** deleted by all [INSERT], [UPDATE] or [DELETE] statements completed -** since the database connection was opened, including those executed as -** part of trigger programs. ^Executing any other type of SQL statement -** does not affect the value returned by sqlite3_total_changes(). -** -** ^Changes made as part of [foreign key actions] are included in the -** count, but those made as part of REPLACE constraint resolution are -** not. ^Changes to a view that are intercepted by INSTEAD OF triggers -** are not counted. -** -** This the [sqlite3_total_changes(D)] interface only reports the number -** of rows that changed due to SQL statement run against database -** connection D. Any changes by other database connections are ignored. -** To detect changes against a database file from other database -** connections use the [PRAGMA data_version] command or the -** [SQLITE_FCNTL_DATA_VERSION] [file control]. -** -** If a separate thread makes changes on the same database connection -** while [sqlite3_total_changes()] is running then the value -** returned is unpredictable and not meaningful. -** -** See also: -** <ul> -** <li> the [sqlite3_changes()] interface -** <li> the [count_changes pragma] -** <li> the [changes() SQL function] -** <li> the [data_version pragma] -** <li> the [SQLITE_FCNTL_DATA_VERSION] [file control] -** </ul> -*/ -int sqlite3_total_changes(sqlite3*); - -/* -** CAPI3REF: Interrupt A Long-Running Query -** METHOD: sqlite3 -** -** ^This function causes any pending database operation to abort and -** return at its earliest opportunity. This routine is typically -** called in response to a user action such as pressing "Cancel" -** or Ctrl-C where the user wants a long query operation to halt -** immediately. -** -** ^It is safe to call this routine from a thread different from the -** thread that is currently running the database operation. But it -** is not safe to call this routine with a [database connection] that -** is closed or might close before sqlite3_interrupt() returns. -** -** ^If an SQL operation is very nearly finished at the time when -** sqlite3_interrupt() is called, then it might not have an opportunity -** to be interrupted and might continue to completion. -** -** ^An SQL operation that is interrupted will return [SQLITE_INTERRUPT]. -** ^If the interrupted SQL operation is an INSERT, UPDATE, or DELETE -** that is inside an explicit transaction, then the entire transaction -** will be rolled back automatically. -** -** ^The sqlite3_interrupt(D) call is in effect until all currently running -** SQL statements on [database connection] D complete. ^Any new SQL statements -** that are started after the sqlite3_interrupt() call and before the -** running statements reaches zero are interrupted as if they had been -** running prior to the sqlite3_interrupt() call. ^New SQL statements -** that are started after the running statement count reaches zero are -** not effected by the sqlite3_interrupt(). -** ^A call to sqlite3_interrupt(D) that occurs when there are no running -** SQL statements is a no-op and has no effect on SQL statements -** that are started after the sqlite3_interrupt() call returns. -*/ -void sqlite3_interrupt(sqlite3*); - -/* -** CAPI3REF: Determine If An SQL Statement Is Complete -** -** These routines are useful during command-line input to determine if the -** currently entered text seems to form a complete SQL statement or -** if additional input is needed before sending the text into -** SQLite for parsing. ^These routines return 1 if the input string -** appears to be a complete SQL statement. ^A statement is judged to be -** complete if it ends with a semicolon token and is not a prefix of a -** well-formed CREATE TRIGGER statement. ^Semicolons that are embedded within -** string literals or quoted identifier names or comments are not -** independent tokens (they are part of the token in which they are -** embedded) and thus do not count as a statement terminator. ^Whitespace -** and comments that follow the final semicolon are ignored. -** -** ^These routines return 0 if the statement is incomplete. ^If a -** memory allocation fails, then SQLITE_NOMEM is returned. -** -** ^These routines do not parse the SQL statements thus -** will not detect syntactically incorrect SQL. -** -** ^(If SQLite has not been initialized using [sqlite3_initialize()] prior -** to invoking sqlite3_complete16() then sqlite3_initialize() is invoked -** automatically by sqlite3_complete16(). If that initialization fails, -** then the return value from sqlite3_complete16() will be non-zero -** regardless of whether or not the input SQL is complete.)^ -** -** The input to [sqlite3_complete()] must be a zero-terminated -** UTF-8 string. -** -** The input to [sqlite3_complete16()] must be a zero-terminated -** UTF-16 string in native byte order. -*/ -int sqlite3_complete(const(char)* sql); -int sqlite3_complete16(const(void)* sql); - -/* -** CAPI3REF: Register A Callback To Handle SQLITE_BUSY Errors -** KEYWORDS: {busy-handler callback} {busy handler} -** METHOD: sqlite3 -** -** ^The sqlite3_busy_handler(D,X,P) routine sets a callback function X -** that might be invoked with argument P whenever -** an attempt is made to access a database table associated with -** [database connection] D when another thread -** or process has the table locked. -** The sqlite3_busy_handler() interface is used to implement -** [sqlite3_busy_timeout()] and [PRAGMA busy_timeout]. -** -** ^If the busy callback is NULL, then [SQLITE_BUSY] -** is returned immediately upon encountering the lock. ^If the busy callback -** is not NULL, then the callback might be invoked with two arguments. -** -** ^The first argument to the busy handler is a copy of the void* pointer which -** is the third argument to sqlite3_busy_handler(). ^The second argument to -** the busy handler callback is the number of times that the busy handler has -** been invoked previously for the same locking event. ^If the -** busy callback returns 0, then no additional attempts are made to -** access the database and [SQLITE_BUSY] is returned -** to the application. -** ^If the callback returns non-zero, then another attempt -** is made to access the database and the cycle repeats. -** -** The presence of a busy handler does not guarantee that it will be invoked -** when there is lock contention. ^If SQLite determines that invoking the busy -** handler could result in a deadlock, it will go ahead and return [SQLITE_BUSY] -** to the application instead of invoking the -** busy handler. -** Consider a scenario where one process is holding a read lock that -** it is trying to promote to a reserved lock and -** a second process is holding a reserved lock that it is trying -** to promote to an exclusive lock. The first process cannot proceed -** because it is blocked by the second and the second process cannot -** proceed because it is blocked by the first. If both processes -** invoke the busy handlers, neither will make any progress. Therefore, -** SQLite returns [SQLITE_BUSY] for the first process, hoping that this -** will induce the first process to release its read lock and allow -** the second process to proceed. -** -** ^The default busy callback is NULL. -** -** ^(There can only be a single busy handler defined for each -** [database connection]. Setting a new busy handler clears any -** previously set handler.)^ ^Note that calling [sqlite3_busy_timeout()] -** or evaluating [PRAGMA busy_timeout=N] will change the -** busy handler and thus clear any previously set busy handler. -** -** The busy callback should not take any actions which modify the -** database connection that invoked the busy handler. In other words, -** the busy handler is not reentrant. Any such actions -** result in undefined behavior. -** -** A busy handler must not close the database connection -** or [prepared statement] that invoked the busy handler. -*/ -int sqlite3_busy_handler(sqlite3*, int function(void*, int), void*); - -/* -** CAPI3REF: Set A Busy Timeout -** METHOD: sqlite3 -** -** ^This routine sets a [sqlite3_busy_handler | busy handler] that sleeps -** for a specified amount of time when a table is locked. ^The handler -** will sleep multiple times until at least "ms" milliseconds of sleeping -** have accumulated. ^After at least "ms" milliseconds of sleeping, -** the handler returns 0 which causes [sqlite3_step()] to return -** [SQLITE_BUSY]. -** -** ^Calling this routine with an argument less than or equal to zero -** turns off all busy handlers. -** -** ^(There can only be a single busy handler for a particular -** [database connection] at any given moment. If another busy handler -** was defined (using [sqlite3_busy_handler()]) prior to calling -** this routine, that other busy handler is cleared.)^ -** -** See also: [PRAGMA busy_timeout] -*/ -int sqlite3_busy_timeout(sqlite3*, int ms); - -/* -** CAPI3REF: Convenience Routines For Running Queries -** METHOD: sqlite3 -** -** This is a legacy interface that is preserved for backwards compatibility. -** Use of this interface is not recommended. -** -** Definition: A <b>result table</b> is memory data structure created by the -** [sqlite3_get_table()] interface. A result table records the -** complete query results from one or more queries. -** -** The table conceptually has a number of rows and columns. But -** these numbers are not part of the result table itself. These -** numbers are obtained separately. Let N be the number of rows -** and M be the number of columns. -** -** A result table is an array of pointers to zero-terminated UTF-8 strings. -** There are (N+1)*M elements in the array. The first M pointers point -** to zero-terminated strings that contain the names of the columns. -** The remaining entries all point to query results. NULL values result -** in NULL pointers. All other values are in their UTF-8 zero-terminated -** string representation as returned by [sqlite3_column_text()]. -** -** A result table might consist of one or more memory allocations. -** It is not safe to pass a result table directly to [sqlite3_free()]. -** A result table should be deallocated using [sqlite3_free_table()]. -** -** ^(As an example of the result table format, suppose a query result -** is as follows: -** -** <blockquote><pre> -** Name | Age -** ----------------------- -** Alice | 43 -** Bob | 28 -** Cindy | 21 -** </pre></blockquote> -** -** There are two column (M==2) and three rows (N==3). Thus the -** result table has 8 entries. Suppose the result table is stored -** in an array names azResult. Then azResult holds this content: -** -** <blockquote><pre> -** azResult[0] = "Name"; -** azResult[1] = "Age"; -** azResult[2] = "Alice"; -** azResult[3] = "43"; -** azResult[4] = "Bob"; -** azResult[5] = "28"; -** azResult[6] = "Cindy"; -** azResult[7] = "21"; -** </pre></blockquote>)^ -** -** ^The sqlite3_get_table() function evaluates one or more -** semicolon-separated SQL statements in the zero-terminated UTF-8 -** string of its 2nd parameter and returns a result table to the -** pointer given in its 3rd parameter. -** -** After the application has finished with the result from sqlite3_get_table(), -** it must pass the result table pointer to sqlite3_free_table() in order to -** release the memory that was malloced. Because of the way the -** [sqlite3_malloc()] happens within sqlite3_get_table(), the calling -** function must not try to call [sqlite3_free()] directly. Only -** [sqlite3_free_table()] is able to release the memory properly and safely. -** -** The sqlite3_get_table() interface is implemented as a wrapper around -** [sqlite3_exec()]. The sqlite3_get_table() routine does not have access -** to any internal data structures of SQLite. It uses only the public -** interface defined here. As a consequence, errors that occur in the -** wrapper layer outside of the internal [sqlite3_exec()] call are not -** reflected in subsequent calls to [sqlite3_errcode()] or -** [sqlite3_errmsg()]. -*/ -/* An open database */ -/* SQL to be evaluated */ -/* Results of the query */ -/* Number of result rows written here */ -/* Number of result columns written here */ -/* Error msg written here */ -int sqlite3_get_table( - sqlite3* db, - const(char)* zSql, - char*** pazResult, - int* pnRow, - int* pnColumn, - char** pzErrmsg); -void sqlite3_free_table(char** result); - -/* -** CAPI3REF: Formatted String Printing Functions -** -** These routines are work-alikes of the "printf()" family of functions -** from the standard C library. -** These routines understand most of the common formatting options from -** the standard library printf() -** plus some additional non-standard formats ([%q], [%Q], [%w], and [%z]). -** See the [built-in printf()] documentation for details. -** -** ^The sqlite3_mprintf() and sqlite3_vmprintf() routines write their -** results into memory obtained from [sqlite3_malloc64()]. -** The strings returned by these two routines should be -** released by [sqlite3_free()]. ^Both routines return a -** NULL pointer if [sqlite3_malloc64()] is unable to allocate enough -** memory to hold the resulting string. -** -** ^(The sqlite3_snprintf() routine is similar to "snprintf()" from -** the standard C library. The result is written into the -** buffer supplied as the second parameter whose size is given by -** the first parameter. Note that the order of the -** first two parameters is reversed from snprintf().)^ This is an -** historical accident that cannot be fixed without breaking -** backwards compatibility. ^(Note also that sqlite3_snprintf() -** returns a pointer to its buffer instead of the number of -** characters actually written into the buffer.)^ We admit that -** the number of characters written would be a more useful return -** value but we cannot change the implementation of sqlite3_snprintf() -** now without breaking compatibility. -** -** ^As long as the buffer size is greater than zero, sqlite3_snprintf() -** guarantees that the buffer is always zero-terminated. ^The first -** parameter "n" is the total size of the buffer, including space for -** the zero terminator. So the longest string that can be completely -** written will be n-1 characters. -** -** ^The sqlite3_vsnprintf() routine is a varargs version of sqlite3_snprintf(). -** -** See also: [built-in printf()], [printf() SQL function] -*/ -char* sqlite3_mprintf(const(char)*, ...); -char* sqlite3_vmprintf(const(char)*, va_list); -char* sqlite3_snprintf(int, char*, const(char)*, ...); -char* sqlite3_vsnprintf(int, char*, const(char)*, va_list); - -/* -** CAPI3REF: Memory Allocation Subsystem -** -** The SQLite core uses these three routines for all of its own -** internal memory allocation needs. "Core" in the previous sentence -** does not include operating-system specific VFS implementation. The -** Windows VFS uses native malloc() and free() for some operations. -** -** ^The sqlite3_malloc() routine returns a pointer to a block -** of memory at least N bytes in length, where N is the parameter. -** ^If sqlite3_malloc() is unable to obtain sufficient free -** memory, it returns a NULL pointer. ^If the parameter N to -** sqlite3_malloc() is zero or negative then sqlite3_malloc() returns -** a NULL pointer. -** -** ^The sqlite3_malloc64(N) routine works just like -** sqlite3_malloc(N) except that N is an unsigned 64-bit integer instead -** of a signed 32-bit integer. -** -** ^Calling sqlite3_free() with a pointer previously returned -** by sqlite3_malloc() or sqlite3_realloc() releases that memory so -** that it might be reused. ^The sqlite3_free() routine is -** a no-op if is called with a NULL pointer. Passing a NULL pointer -** to sqlite3_free() is harmless. After being freed, memory -** should neither be read nor written. Even reading previously freed -** memory might result in a segmentation fault or other severe error. -** Memory corruption, a segmentation fault, or other severe error -** might result if sqlite3_free() is called with a non-NULL pointer that -** was not obtained from sqlite3_malloc() or sqlite3_realloc(). -** -** ^The sqlite3_realloc(X,N) interface attempts to resize a -** prior memory allocation X to be at least N bytes. -** ^If the X parameter to sqlite3_realloc(X,N) -** is a NULL pointer then its behavior is identical to calling -** sqlite3_malloc(N). -** ^If the N parameter to sqlite3_realloc(X,N) is zero or -** negative then the behavior is exactly the same as calling -** sqlite3_free(X). -** ^sqlite3_realloc(X,N) returns a pointer to a memory allocation -** of at least N bytes in size or NULL if insufficient memory is available. -** ^If M is the size of the prior allocation, then min(N,M) bytes -** of the prior allocation are copied into the beginning of buffer returned -** by sqlite3_realloc(X,N) and the prior allocation is freed. -** ^If sqlite3_realloc(X,N) returns NULL and N is positive, then the -** prior allocation is not freed. -** -** ^The sqlite3_realloc64(X,N) interfaces works the same as -** sqlite3_realloc(X,N) except that N is a 64-bit unsigned integer instead -** of a 32-bit signed integer. -** -** ^If X is a memory allocation previously obtained from sqlite3_malloc(), -** sqlite3_malloc64(), sqlite3_realloc(), or sqlite3_realloc64(), then -** sqlite3_msize(X) returns the size of that memory allocation in bytes. -** ^The value returned by sqlite3_msize(X) might be larger than the number -** of bytes requested when X was allocated. ^If X is a NULL pointer then -** sqlite3_msize(X) returns zero. If X points to something that is not -** the beginning of memory allocation, or if it points to a formerly -** valid memory allocation that has now been freed, then the behavior -** of sqlite3_msize(X) is undefined and possibly harmful. -** -** ^The memory returned by sqlite3_malloc(), sqlite3_realloc(), -** sqlite3_malloc64(), and sqlite3_realloc64() -** is always aligned to at least an 8 byte boundary, or to a -** 4 byte boundary if the [SQLITE_4_BYTE_ALIGNED_MALLOC] compile-time -** option is used. -** -** In SQLite version 3.5.0 and 3.5.1, it was possible to define -** the SQLITE_OMIT_MEMORY_ALLOCATION which would cause the built-in -** implementation of these routines to be omitted. That capability -** is no longer provided. Only built-in memory allocators can be used. -** -** Prior to SQLite version 3.7.10, the Windows OS interface layer called -** the system malloc() and free() directly when converting -** filenames between the UTF-8 encoding used by SQLite -** and whatever filename encoding is used by the particular Windows -** installation. Memory allocation errors were detected, but -** they were reported back as [SQLITE_CANTOPEN] or -** [SQLITE_IOERR] rather than [SQLITE_NOMEM]. -** -** The pointer arguments to [sqlite3_free()] and [sqlite3_realloc()] -** must be either NULL or else pointers obtained from a prior -** invocation of [sqlite3_malloc()] or [sqlite3_realloc()] that have -** not yet been released. -** -** The application must not read or write any part of -** a block of memory after it has been released using -** [sqlite3_free()] or [sqlite3_realloc()]. -*/ -void* sqlite3_malloc(int); -void* sqlite3_malloc64(sqlite3_uint64); -void* sqlite3_realloc(void*, int); -void* sqlite3_realloc64(void*, sqlite3_uint64); -void sqlite3_free(void*); -sqlite3_uint64 sqlite3_msize(void*); - -/* -** CAPI3REF: Memory Allocator Statistics -** -** SQLite provides these two interfaces for reporting on the status -** of the [sqlite3_malloc()], [sqlite3_free()], and [sqlite3_realloc()] -** routines, which form the built-in memory allocation subsystem. -** -** ^The [sqlite3_memory_used()] routine returns the number of bytes -** of memory currently outstanding (malloced but not freed). -** ^The [sqlite3_memory_highwater()] routine returns the maximum -** value of [sqlite3_memory_used()] since the high-water mark -** was last reset. ^The values returned by [sqlite3_memory_used()] and -** [sqlite3_memory_highwater()] include any overhead -** added by SQLite in its implementation of [sqlite3_malloc()], -** but not overhead added by the any underlying system library -** routines that [sqlite3_malloc()] may call. -** -** ^The memory high-water mark is reset to the current value of -** [sqlite3_memory_used()] if and only if the parameter to -** [sqlite3_memory_highwater()] is true. ^The value returned -** by [sqlite3_memory_highwater(1)] is the high-water mark -** prior to the reset. -*/ -sqlite3_int64 sqlite3_memory_used(); -sqlite3_int64 sqlite3_memory_highwater(int resetFlag); - -/* -** CAPI3REF: Pseudo-Random Number Generator -** -** SQLite contains a high-quality pseudo-random number generator (PRNG) used to -** select random [ROWID | ROWIDs] when inserting new records into a table that -** already uses the largest possible [ROWID]. The PRNG is also used for -** the build-in random() and randomblob() SQL functions. This interface allows -** applications to access the same PRNG for other purposes. -** -** ^A call to this routine stores N bytes of randomness into buffer P. -** ^The P parameter can be a NULL pointer. -** -** ^If this routine has not been previously called or if the previous -** call had N less than one or a NULL pointer for P, then the PRNG is -** seeded using randomness obtained from the xRandomness method of -** the default [sqlite3_vfs] object. -** ^If the previous call to this routine had an N of 1 or more and a -** non-NULL P then the pseudo-randomness is generated -** internally and without recourse to the [sqlite3_vfs] xRandomness -** method. -*/ -void sqlite3_randomness(int N, void* P); - -/* -** CAPI3REF: Compile-Time Authorization Callbacks -** METHOD: sqlite3 -** KEYWORDS: {authorizer callback} -** -** ^This routine registers an authorizer callback with a particular -** [database connection], supplied in the first argument. -** ^The authorizer callback is invoked as SQL statements are being compiled -** by [sqlite3_prepare()] or its variants [sqlite3_prepare_v2()], -** [sqlite3_prepare_v3()], [sqlite3_prepare16()], [sqlite3_prepare16_v2()], -** and [sqlite3_prepare16_v3()]. ^At various -** points during the compilation process, as logic is being created -** to perform various actions, the authorizer callback is invoked to -** see if those actions are allowed. ^The authorizer callback should -** return [SQLITE_OK] to allow the action, [SQLITE_IGNORE] to disallow the -** specific action but allow the SQL statement to continue to be -** compiled, or [SQLITE_DENY] to cause the entire SQL statement to be -** rejected with an error. ^If the authorizer callback returns -** any value other than [SQLITE_IGNORE], [SQLITE_OK], or [SQLITE_DENY] -** then the [sqlite3_prepare_v2()] or equivalent call that triggered -** the authorizer will fail with an error message. -** -** When the callback returns [SQLITE_OK], that means the operation -** requested is ok. ^When the callback returns [SQLITE_DENY], the -** [sqlite3_prepare_v2()] or equivalent call that triggered the -** authorizer will fail with an error message explaining that -** access is denied. -** -** ^The first parameter to the authorizer callback is a copy of the third -** parameter to the sqlite3_set_authorizer() interface. ^The second parameter -** to the callback is an integer [SQLITE_COPY | action code] that specifies -** the particular action to be authorized. ^The third through sixth parameters -** to the callback are either NULL pointers or zero-terminated strings -** that contain additional details about the action to be authorized. -** Applications must always be prepared to encounter a NULL pointer in any -** of the third through the sixth parameters of the authorization callback. -** -** ^If the action code is [SQLITE_READ] -** and the callback returns [SQLITE_IGNORE] then the -** [prepared statement] statement is constructed to substitute -** a NULL value in place of the table column that would have -** been read if [SQLITE_OK] had been returned. The [SQLITE_IGNORE] -** return can be used to deny an untrusted user access to individual -** columns of a table. -** ^When a table is referenced by a [SELECT] but no column values are -** extracted from that table (for example in a query like -** "SELECT count(*) FROM tab") then the [SQLITE_READ] authorizer callback -** is invoked once for that table with a column name that is an empty string. -** ^If the action code is [SQLITE_DELETE] and the callback returns -** [SQLITE_IGNORE] then the [DELETE] operation proceeds but the -** [truncate optimization] is disabled and all rows are deleted individually. -** -** An authorizer is used when [sqlite3_prepare | preparing] -** SQL statements from an untrusted source, to ensure that the SQL statements -** do not try to access data they are not allowed to see, or that they do not -** try to execute malicious statements that damage the database. For -** example, an application may allow a user to enter arbitrary -** SQL queries for evaluation by a database. But the application does -** not want the user to be able to make arbitrary changes to the -** database. An authorizer could then be put in place while the -** user-entered SQL is being [sqlite3_prepare | prepared] that -** disallows everything except [SELECT] statements. -** -** Applications that need to process SQL from untrusted sources -** might also consider lowering resource limits using [sqlite3_limit()] -** and limiting database size using the [max_page_count] [PRAGMA] -** in addition to using an authorizer. -** -** ^(Only a single authorizer can be in place on a database connection -** at a time. Each call to sqlite3_set_authorizer overrides the -** previous call.)^ ^Disable the authorizer by installing a NULL callback. -** The authorizer is disabled by default. -** -** The authorizer callback must not do anything that will modify -** the database connection that invoked the authorizer callback. -** Note that [sqlite3_prepare_v2()] and [sqlite3_step()] both modify their -** database connections for the meaning of "modify" in this paragraph. -** -** ^When [sqlite3_prepare_v2()] is used to prepare a statement, the -** statement might be re-prepared during [sqlite3_step()] due to a -** schema change. Hence, the application should ensure that the -** correct authorizer callback remains in place during the [sqlite3_step()]. -** -** ^Note that the authorizer callback is invoked only during -** [sqlite3_prepare()] or its variants. Authorization is not -** performed during statement evaluation in [sqlite3_step()], unless -** as stated in the previous paragraph, sqlite3_step() invokes -** sqlite3_prepare_v2() to reprepare a statement after a schema change. -*/ -int sqlite3_set_authorizer( - sqlite3*, - int function(void*, int, const(char)*, const(char)*, const(char)*, const(char)*) xAuth, - void* pUserData); - -/* -** CAPI3REF: Authorizer Return Codes -** -** The [sqlite3_set_authorizer | authorizer callback function] must -** return either [SQLITE_OK] or one of these two constants in order -** to signal SQLite whether or not the action is permitted. See the -** [sqlite3_set_authorizer | authorizer documentation] for additional -** information. -** -** Note that SQLITE_IGNORE is also used as a [conflict resolution mode] -** returned from the [sqlite3_vtab_on_conflict()] interface. -*/ -enum SQLITE_DENY = 1; /* Abort the SQL statement with an error */ -enum SQLITE_IGNORE = 2; /* Don't allow access, but don't generate an error */ - -/* -** CAPI3REF: Authorizer Action Codes -** -** The [sqlite3_set_authorizer()] interface registers a callback function -** that is invoked to authorize certain SQL statement actions. The -** second parameter to the callback is an integer code that specifies -** what action is being authorized. These are the integer action codes that -** the authorizer callback may be passed. -** -** These action code values signify what kind of operation is to be -** authorized. The 3rd and 4th parameters to the authorization -** callback function will be parameters or NULL depending on which of these -** codes is used as the second parameter. ^(The 5th parameter to the -** authorizer callback is the name of the database ("main", "temp", -** etc.) if applicable.)^ ^The 6th parameter to the authorizer callback -** is the name of the inner-most trigger or view that is responsible for -** the access attempt or NULL if this access attempt is directly from -** top-level SQL code. -*/ -/******************************************* 3rd ************ 4th ***********/ -enum SQLITE_CREATE_INDEX = 1; /* Index Name Table Name */ -enum SQLITE_CREATE_TABLE = 2; /* Table Name NULL */ -enum SQLITE_CREATE_TEMP_INDEX = 3; /* Index Name Table Name */ -enum SQLITE_CREATE_TEMP_TABLE = 4; /* Table Name NULL */ -enum SQLITE_CREATE_TEMP_TRIGGER = 5; /* Trigger Name Table Name */ -enum SQLITE_CREATE_TEMP_VIEW = 6; /* View Name NULL */ -enum SQLITE_CREATE_TRIGGER = 7; /* Trigger Name Table Name */ -enum SQLITE_CREATE_VIEW = 8; /* View Name NULL */ -enum SQLITE_DELETE = 9; /* Table Name NULL */ -enum SQLITE_DROP_INDEX = 10; /* Index Name Table Name */ -enum SQLITE_DROP_TABLE = 11; /* Table Name NULL */ -enum SQLITE_DROP_TEMP_INDEX = 12; /* Index Name Table Name */ -enum SQLITE_DROP_TEMP_TABLE = 13; /* Table Name NULL */ -enum SQLITE_DROP_TEMP_TRIGGER = 14; /* Trigger Name Table Name */ -enum SQLITE_DROP_TEMP_VIEW = 15; /* View Name NULL */ -enum SQLITE_DROP_TRIGGER = 16; /* Trigger Name Table Name */ -enum SQLITE_DROP_VIEW = 17; /* View Name NULL */ -enum SQLITE_INSERT = 18; /* Table Name NULL */ -enum SQLITE_PRAGMA = 19; /* Pragma Name 1st arg or NULL */ -enum SQLITE_READ = 20; /* Table Name Column Name */ -enum SQLITE_SELECT = 21; /* NULL NULL */ -enum SQLITE_TRANSACTION = 22; /* Operation NULL */ -enum SQLITE_UPDATE = 23; /* Table Name Column Name */ -enum SQLITE_ATTACH = 24; /* Filename NULL */ -enum SQLITE_DETACH = 25; /* Database Name NULL */ -enum SQLITE_ALTER_TABLE = 26; /* Database Name Table Name */ -enum SQLITE_REINDEX = 27; /* Index Name NULL */ -enum SQLITE_ANALYZE = 28; /* Table Name NULL */ -enum SQLITE_CREATE_VTABLE = 29; /* Table Name Module Name */ -enum SQLITE_DROP_VTABLE = 30; /* Table Name Module Name */ -enum SQLITE_FUNCTION = 31; /* NULL Function Name */ -enum SQLITE_SAVEPOINT = 32; /* Operation Savepoint Name */ -enum SQLITE_COPY = 0; /* No longer used */ -enum SQLITE_RECURSIVE = 33; /* NULL NULL */ - -/* -** CAPI3REF: Tracing And Profiling Functions -** METHOD: sqlite3 -** -** These routines are deprecated. Use the [sqlite3_trace_v2()] interface -** instead of the routines described here. -** -** These routines register callback functions that can be used for -** tracing and profiling the execution of SQL statements. -** -** ^The callback function registered by sqlite3_trace() is invoked at -** various times when an SQL statement is being run by [sqlite3_step()]. -** ^The sqlite3_trace() callback is invoked with a UTF-8 rendering of the -** SQL statement text as the statement first begins executing. -** ^(Additional sqlite3_trace() callbacks might occur -** as each triggered subprogram is entered. The callbacks for triggers -** contain a UTF-8 SQL comment that identifies the trigger.)^ -** -** The [SQLITE_TRACE_SIZE_LIMIT] compile-time option can be used to limit -** the length of [bound parameter] expansion in the output of sqlite3_trace(). -** -** ^The callback function registered by sqlite3_profile() is invoked -** as each SQL statement finishes. ^The profile callback contains -** the original statement text and an estimate of wall-clock time -** of how long that statement took to run. ^The profile callback -** time is in units of nanoseconds, however the current implementation -** is only capable of millisecond resolution so the six least significant -** digits in the time are meaningless. Future versions of SQLite -** might provide greater resolution on the profiler callback. The -** sqlite3_profile() function is considered experimental and is -** subject to change in future versions of SQLite. -*/ -void* sqlite3_trace(sqlite3*, void function(void*, const(char)*) xTrace, void*); -void* sqlite3_profile( - sqlite3*, - void function(void*, const(char)*, sqlite3_uint64) xProfile, - void*); - -/* -** CAPI3REF: SQL Trace Event Codes -** KEYWORDS: SQLITE_TRACE -** -** These constants identify classes of events that can be monitored -** using the [sqlite3_trace_v2()] tracing logic. The M argument -** to [sqlite3_trace_v2(D,M,X,P)] is an OR-ed combination of one or more of -** the following constants. ^The first argument to the trace callback -** is one of the following constants. -** -** New tracing constants may be added in future releases. -** -** ^A trace callback has four arguments: xCallback(T,C,P,X). -** ^The T argument is one of the integer type codes above. -** ^The C argument is a copy of the context pointer passed in as the -** fourth argument to [sqlite3_trace_v2()]. -** The P and X arguments are pointers whose meanings depend on T. -** -** <dl> -** [[SQLITE_TRACE_STMT]] <dt>SQLITE_TRACE_STMT</dt> -** <dd>^An SQLITE_TRACE_STMT callback is invoked when a prepared statement -** first begins running and possibly at other times during the -** execution of the prepared statement, such as at the start of each -** trigger subprogram. ^The P argument is a pointer to the -** [prepared statement]. ^The X argument is a pointer to a string which -** is the unexpanded SQL text of the prepared statement or an SQL comment -** that indicates the invocation of a trigger. ^The callback can compute -** the same text that would have been returned by the legacy [sqlite3_trace()] -** interface by using the X argument when X begins with "--" and invoking -** [sqlite3_expanded_sql(P)] otherwise. -** -** [[SQLITE_TRACE_PROFILE]] <dt>SQLITE_TRACE_PROFILE</dt> -** <dd>^An SQLITE_TRACE_PROFILE callback provides approximately the same -** information as is provided by the [sqlite3_profile()] callback. -** ^The P argument is a pointer to the [prepared statement] and the -** X argument points to a 64-bit integer which is the estimated of -** the number of nanosecond that the prepared statement took to run. -** ^The SQLITE_TRACE_PROFILE callback is invoked when the statement finishes. -** -** [[SQLITE_TRACE_ROW]] <dt>SQLITE_TRACE_ROW</dt> -** <dd>^An SQLITE_TRACE_ROW callback is invoked whenever a prepared -** statement generates a single row of result. -** ^The P argument is a pointer to the [prepared statement] and the -** X argument is unused. -** -** [[SQLITE_TRACE_CLOSE]] <dt>SQLITE_TRACE_CLOSE</dt> -** <dd>^An SQLITE_TRACE_CLOSE callback is invoked when a database -** connection closes. -** ^The P argument is a pointer to the [database connection] object -** and the X argument is unused. -** </dl> -*/ -enum SQLITE_TRACE_STMT = 0x01; -enum SQLITE_TRACE_PROFILE = 0x02; -enum SQLITE_TRACE_ROW = 0x04; -enum SQLITE_TRACE_CLOSE = 0x08; - -/* -** CAPI3REF: SQL Trace Hook -** METHOD: sqlite3 -** -** ^The sqlite3_trace_v2(D,M,X,P) interface registers a trace callback -** function X against [database connection] D, using property mask M -** and context pointer P. ^If the X callback is -** NULL or if the M mask is zero, then tracing is disabled. The -** M argument should be the bitwise OR-ed combination of -** zero or more [SQLITE_TRACE] constants. -** -** ^Each call to either sqlite3_trace() or sqlite3_trace_v2() overrides -** (cancels) any prior calls to sqlite3_trace() or sqlite3_trace_v2(). -** -** ^The X callback is invoked whenever any of the events identified by -** mask M occur. ^The integer return value from the callback is currently -** ignored, though this may change in future releases. Callback -** implementations should return zero to ensure future compatibility. -** -** ^A trace callback is invoked with four arguments: callback(T,C,P,X). -** ^The T argument is one of the [SQLITE_TRACE] -** constants to indicate why the callback was invoked. -** ^The C argument is a copy of the context pointer. -** The P and X arguments are pointers whose meanings depend on T. -** -** The sqlite3_trace_v2() interface is intended to replace the legacy -** interfaces [sqlite3_trace()] and [sqlite3_profile()], both of which -** are deprecated. -*/ -int sqlite3_trace_v2( - sqlite3*, - uint uMask, - int function(uint, void*, void*, void*) xCallback, - void* pCtx); - -/* -** CAPI3REF: Query Progress Callbacks -** METHOD: sqlite3 -** -** ^The sqlite3_progress_handler(D,N,X,P) interface causes the callback -** function X to be invoked periodically during long running calls to -** [sqlite3_exec()], [sqlite3_step()] and [sqlite3_get_table()] for -** database connection D. An example use for this -** interface is to keep a GUI updated during a large query. -** -** ^The parameter P is passed through as the only parameter to the -** callback function X. ^The parameter N is the approximate number of -** [virtual machine instructions] that are evaluated between successive -** invocations of the callback X. ^If N is less than one then the progress -** handler is disabled. -** -** ^Only a single progress handler may be defined at one time per -** [database connection]; setting a new progress handler cancels the -** old one. ^Setting parameter X to NULL disables the progress handler. -** ^The progress handler is also disabled by setting N to a value less -** than 1. -** -** ^If the progress callback returns non-zero, the operation is -** interrupted. This feature can be used to implement a -** "Cancel" button on a GUI progress dialog box. -** -** The progress handler callback must not do anything that will modify -** the database connection that invoked the progress handler. -** Note that [sqlite3_prepare_v2()] and [sqlite3_step()] both modify their -** database connections for the meaning of "modify" in this paragraph. -** -*/ -void sqlite3_progress_handler(sqlite3*, int, int function(void*), void*); - -/* -** CAPI3REF: Opening A New Database Connection -** CONSTRUCTOR: sqlite3 -** -** ^These routines open an SQLite database file as specified by the -** filename argument. ^The filename argument is interpreted as UTF-8 for -** sqlite3_open() and sqlite3_open_v2() and as UTF-16 in the native byte -** order for sqlite3_open16(). ^(A [database connection] handle is usually -** returned in *ppDb, even if an error occurs. The only exception is that -** if SQLite is unable to allocate memory to hold the [sqlite3] object, -** a NULL will be written into *ppDb instead of a pointer to the [sqlite3] -** object.)^ ^(If the database is opened (and/or created) successfully, then -** [SQLITE_OK] is returned. Otherwise an [error code] is returned.)^ ^The -** [sqlite3_errmsg()] or [sqlite3_errmsg16()] routines can be used to obtain -** an English language description of the error following a failure of any -** of the sqlite3_open() routines. -** -** ^The default encoding will be UTF-8 for databases created using -** sqlite3_open() or sqlite3_open_v2(). ^The default encoding for databases -** created using sqlite3_open16() will be UTF-16 in the native byte order. -** -** Whether or not an error occurs when it is opened, resources -** associated with the [database connection] handle should be released by -** passing it to [sqlite3_close()] when it is no longer required. -** -** The sqlite3_open_v2() interface works like sqlite3_open() -** except that it accepts two additional parameters for additional control -** over the new database connection. ^(The flags parameter to -** sqlite3_open_v2() can take one of -** the following three values, optionally combined with the -** [SQLITE_OPEN_NOMUTEX], [SQLITE_OPEN_FULLMUTEX], [SQLITE_OPEN_SHAREDCACHE], -** [SQLITE_OPEN_PRIVATECACHE], and/or [SQLITE_OPEN_URI] flags:)^ -** -** <dl> -** ^(<dt>[SQLITE_OPEN_READONLY]</dt> -** <dd>The database is opened in read-only mode. If the database does not -** already exist, an error is returned.</dd>)^ -** -** ^(<dt>[SQLITE_OPEN_READWRITE]</dt> -** <dd>The database is opened for reading and writing if possible, or reading -** only if the file is write protected by the operating system. In either -** case the database must already exist, otherwise an error is returned.</dd>)^ -** -** ^(<dt>[SQLITE_OPEN_READWRITE] | [SQLITE_OPEN_CREATE]</dt> -** <dd>The database is opened for reading and writing, and is created if -** it does not already exist. This is the behavior that is always used for -** sqlite3_open() and sqlite3_open16().</dd>)^ -** </dl> -** -** If the 3rd parameter to sqlite3_open_v2() is not one of the -** combinations shown above optionally combined with other -** [SQLITE_OPEN_READONLY | SQLITE_OPEN_* bits] -** then the behavior is undefined. -** -** ^If the [SQLITE_OPEN_NOMUTEX] flag is set, then the database connection -** opens in the multi-thread [threading mode] as long as the single-thread -** mode has not been set at compile-time or start-time. ^If the -** [SQLITE_OPEN_FULLMUTEX] flag is set then the database connection opens -** in the serialized [threading mode] unless single-thread was -** previously selected at compile-time or start-time. -** ^The [SQLITE_OPEN_SHAREDCACHE] flag causes the database connection to be -** eligible to use [shared cache mode], regardless of whether or not shared -** cache is enabled using [sqlite3_enable_shared_cache()]. ^The -** [SQLITE_OPEN_PRIVATECACHE] flag causes the database connection to not -** participate in [shared cache mode] even if it is enabled. -** -** ^The fourth parameter to sqlite3_open_v2() is the name of the -** [sqlite3_vfs] object that defines the operating system interface that -** the new database connection should use. ^If the fourth parameter is -** a NULL pointer then the default [sqlite3_vfs] object is used. -** -** ^If the filename is ":memory:", then a private, temporary in-memory database -** is created for the connection. ^This in-memory database will vanish when -** the database connection is closed. Future versions of SQLite might -** make use of additional special filenames that begin with the ":" character. -** It is recommended that when a database filename actually does begin with -** a ":" character you should prefix the filename with a pathname such as -** "./" to avoid ambiguity. -** -** ^If the filename is an empty string, then a private, temporary -** on-disk database will be created. ^This private database will be -** automatically deleted as soon as the database connection is closed. -** -** [[URI filenames in sqlite3_open()]] <h3>URI Filenames</h3> -** -** ^If [URI filename] interpretation is enabled, and the filename argument -** begins with "file:", then the filename is interpreted as a URI. ^URI -** filename interpretation is enabled if the [SQLITE_OPEN_URI] flag is -** set in the third argument to sqlite3_open_v2(), or if it has -** been enabled globally using the [SQLITE_CONFIG_URI] option with the -** [sqlite3_config()] method or by the [SQLITE_USE_URI] compile-time option. -** URI filename interpretation is turned off -** by default, but future releases of SQLite might enable URI filename -** interpretation by default. See "[URI filenames]" for additional -** information. -** -** URI filenames are parsed according to RFC 3986. ^If the URI contains an -** authority, then it must be either an empty string or the string -** "localhost". ^If the authority is not an empty string or "localhost", an -** error is returned to the caller. ^The fragment component of a URI, if -** present, is ignored. -** -** ^SQLite uses the path component of the URI as the name of the disk file -** which contains the database. ^If the path begins with a '/' character, -** then it is interpreted as an absolute path. ^If the path does not begin -** with a '/' (meaning that the authority section is omitted from the URI) -** then the path is interpreted as a relative path. -** ^(On windows, the first component of an absolute path -** is a drive specification (e.g. "C:").)^ -** -** [[core URI query parameters]] -** The query component of a URI may contain parameters that are interpreted -** either by SQLite itself, or by a [VFS | custom VFS implementation]. -** SQLite and its built-in [VFSes] interpret the -** following query parameters: -** -** <ul> -** <li> <b>vfs</b>: ^The "vfs" parameter may be used to specify the name of -** a VFS object that provides the operating system interface that should -** be used to access the database file on disk. ^If this option is set to -** an empty string the default VFS object is used. ^Specifying an unknown -** VFS is an error. ^If sqlite3_open_v2() is used and the vfs option is -** present, then the VFS specified by the option takes precedence over -** the value passed as the fourth parameter to sqlite3_open_v2(). -** -** <li> <b>mode</b>: ^(The mode parameter may be set to either "ro", "rw", -** "rwc", or "memory". Attempting to set it to any other value is -** an error)^. -** ^If "ro" is specified, then the database is opened for read-only -** access, just as if the [SQLITE_OPEN_READONLY] flag had been set in the -** third argument to sqlite3_open_v2(). ^If the mode option is set to -** "rw", then the database is opened for read-write (but not create) -** access, as if SQLITE_OPEN_READWRITE (but not SQLITE_OPEN_CREATE) had -** been set. ^Value "rwc" is equivalent to setting both -** SQLITE_OPEN_READWRITE and SQLITE_OPEN_CREATE. ^If the mode option is -** set to "memory" then a pure [in-memory database] that never reads -** or writes from disk is used. ^It is an error to specify a value for -** the mode parameter that is less restrictive than that specified by -** the flags passed in the third parameter to sqlite3_open_v2(). -** -** <li> <b>cache</b>: ^The cache parameter may be set to either "shared" or -** "private". ^Setting it to "shared" is equivalent to setting the -** SQLITE_OPEN_SHAREDCACHE bit in the flags argument passed to -** sqlite3_open_v2(). ^Setting the cache parameter to "private" is -** equivalent to setting the SQLITE_OPEN_PRIVATECACHE bit. -** ^If sqlite3_open_v2() is used and the "cache" parameter is present in -** a URI filename, its value overrides any behavior requested by setting -** SQLITE_OPEN_PRIVATECACHE or SQLITE_OPEN_SHAREDCACHE flag. -** -** <li> <b>psow</b>: ^The psow parameter indicates whether or not the -** [powersafe overwrite] property does or does not apply to the -** storage media on which the database file resides. -** -** <li> <b>nolock</b>: ^The nolock parameter is a boolean query parameter -** which if set disables file locking in rollback journal modes. This -** is useful for accessing a database on a filesystem that does not -** support locking. Caution: Database corruption might result if two -** or more processes write to the same database and any one of those -** processes uses nolock=1. -** -** <li> <b>immutable</b>: ^The immutable parameter is a boolean query -** parameter that indicates that the database file is stored on -** read-only media. ^When immutable is set, SQLite assumes that the -** database file cannot be changed, even by a process with higher -** privilege, and so the database is opened read-only and all locking -** and change detection is disabled. Caution: Setting the immutable -** property on a database file that does in fact change can result -** in incorrect query results and/or [SQLITE_CORRUPT] errors. -** See also: [SQLITE_IOCAP_IMMUTABLE]. -** -** </ul> -** -** ^Specifying an unknown parameter in the query component of a URI is not an -** error. Future versions of SQLite might understand additional query -** parameters. See "[query parameters with special meaning to SQLite]" for -** additional information. -** -** [[URI filename examples]] <h3>URI filename examples</h3> -** -** <table border="1" align=center cellpadding=5> -** <tr><th> URI filenames <th> Results -** <tr><td> file:data.db <td> -** Open the file "data.db" in the current directory. -** <tr><td> file:/home/fred/data.db<br> -** file:///home/fred/data.db <br> -** file://localhost/home/fred/data.db <br> <td> -** Open the database file "/home/fred/data.db". -** <tr><td> file://darkstar/home/fred/data.db <td> -** An error. "darkstar" is not a recognized authority. -** <tr><td style="white-space:nowrap"> -** file:///C:/Documents%20and%20Settings/fred/Desktop/data.db -** <td> Windows only: Open the file "data.db" on fred's desktop on drive -** C:. Note that the %20 escaping in this example is not strictly -** necessary - space characters can be used literally -** in URI filenames. -** <tr><td> file:data.db?mode=ro&cache=private <td> -** Open file "data.db" in the current directory for read-only access. -** Regardless of whether or not shared-cache mode is enabled by -** default, use a private cache. -** <tr><td> file:/home/fred/data.db?vfs=unix-dotfile <td> -** Open file "/home/fred/data.db". Use the special VFS "unix-dotfile" -** that uses dot-files in place of posix advisory locking. -** <tr><td> file:data.db?mode=readonly <td> -** An error. "readonly" is not a valid option for the "mode" parameter. -** </table> -** -** ^URI hexadecimal escape sequences (%HH) are supported within the path and -** query components of a URI. A hexadecimal escape sequence consists of a -** percent sign - "%" - followed by exactly two hexadecimal digits -** specifying an octet value. ^Before the path or query components of a -** URI filename are interpreted, they are encoded using UTF-8 and all -** hexadecimal escape sequences replaced by a single byte containing the -** corresponding octet. If this process generates an invalid UTF-8 encoding, -** the results are undefined. -** -** <b>Note to Windows users:</b> The encoding used for the filename argument -** of sqlite3_open() and sqlite3_open_v2() must be UTF-8, not whatever -** codepage is currently defined. Filenames containing international -** characters must be converted to UTF-8 prior to passing them into -** sqlite3_open() or sqlite3_open_v2(). -** -** <b>Note to Windows Runtime users:</b> The temporary directory must be set -** prior to calling sqlite3_open() or sqlite3_open_v2(). Otherwise, various -** features that require the use of temporary files may fail. -** -** See also: [sqlite3_temp_directory] -*/ -/* Database filename (UTF-8) */ -/* OUT: SQLite db handle */ -int sqlite3_open(const(char)* filename, sqlite3** ppDb); - -/* Database filename (UTF-16) */ -/* OUT: SQLite db handle */ -int sqlite3_open16(const(void)* filename, sqlite3** ppDb); - -/* Database filename (UTF-8) */ -/* OUT: SQLite db handle */ -/* Flags */ -/* Name of VFS module to use */ -int sqlite3_open_v2( - const(char)* filename, - sqlite3** ppDb, - int flags, - const(char)* zVfs); - -/* -** CAPI3REF: Obtain Values For URI Parameters -** -** These are utility routines, useful to VFS implementations, that check -** to see if a database file was a URI that contained a specific query -** parameter, and if so obtains the value of that query parameter. -** -** If F is the database filename pointer passed into the xOpen() method of -** a VFS implementation when the flags parameter to xOpen() has one or -** more of the [SQLITE_OPEN_URI] or [SQLITE_OPEN_MAIN_DB] bits set and -** P is the name of the query parameter, then -** sqlite3_uri_parameter(F,P) returns the value of the P -** parameter if it exists or a NULL pointer if P does not appear as a -** query parameter on F. If P is a query parameter of F -** has no explicit value, then sqlite3_uri_parameter(F,P) returns -** a pointer to an empty string. -** -** The sqlite3_uri_boolean(F,P,B) routine assumes that P is a boolean -** parameter and returns true (1) or false (0) according to the value -** of P. The sqlite3_uri_boolean(F,P,B) routine returns true (1) if the -** value of query parameter P is one of "yes", "true", or "on" in any -** case or if the value begins with a non-zero number. The -** sqlite3_uri_boolean(F,P,B) routines returns false (0) if the value of -** query parameter P is one of "no", "false", or "off" in any case or -** if the value begins with a numeric zero. If P is not a query -** parameter on F or if the value of P is does not match any of the -** above, then sqlite3_uri_boolean(F,P,B) returns (B!=0). -** -** The sqlite3_uri_int64(F,P,D) routine converts the value of P into a -** 64-bit signed integer and returns that integer, or D if P does not -** exist. If the value of P is something other than an integer, then -** zero is returned. -** -** If F is a NULL pointer, then sqlite3_uri_parameter(F,P) returns NULL and -** sqlite3_uri_boolean(F,P,B) returns B. If F is not a NULL pointer and -** is not a database file pathname pointer that SQLite passed into the xOpen -** VFS method, then the behavior of this routine is undefined and probably -** undesirable. -*/ -const(char)* sqlite3_uri_parameter(const(char)* zFilename, const(char)* zParam); -int sqlite3_uri_boolean(const(char)* zFile, const(char)* zParam, int bDefault); -sqlite3_int64 sqlite3_uri_int64(const(char)*, const(char)*, sqlite3_int64); - -/* -** CAPI3REF: Error Codes And Messages -** METHOD: sqlite3 -** -** ^If the most recent sqlite3_* API call associated with -** [database connection] D failed, then the sqlite3_errcode(D) interface -** returns the numeric [result code] or [extended result code] for that -** API call. -** ^The sqlite3_extended_errcode() -** interface is the same except that it always returns the -** [extended result code] even when extended result codes are -** disabled. -** -** The values returned by sqlite3_errcode() and/or -** sqlite3_extended_errcode() might change with each API call. -** Except, there are some interfaces that are guaranteed to never -** change the value of the error code. The error-code preserving -** interfaces are: -** -** <ul> -** <li> sqlite3_errcode() -** <li> sqlite3_extended_errcode() -** <li> sqlite3_errmsg() -** <li> sqlite3_errmsg16() -** </ul> -** -** ^The sqlite3_errmsg() and sqlite3_errmsg16() return English-language -** text that describes the error, as either UTF-8 or UTF-16 respectively. -** ^(Memory to hold the error message string is managed internally. -** The application does not need to worry about freeing the result. -** However, the error string might be overwritten or deallocated by -** subsequent calls to other SQLite interface functions.)^ -** -** ^The sqlite3_errstr() interface returns the English-language text -** that describes the [result code], as UTF-8. -** ^(Memory to hold the error message string is managed internally -** and must not be freed by the application)^. -** -** When the serialized [threading mode] is in use, it might be the -** case that a second error occurs on a separate thread in between -** the time of the first error and the call to these interfaces. -** When that happens, the second error will be reported since these -** interfaces always report the most recent result. To avoid -** this, each thread can obtain exclusive use of the [database connection] D -** by invoking [sqlite3_mutex_enter]([sqlite3_db_mutex](D)) before beginning -** to use D and invoking [sqlite3_mutex_leave]([sqlite3_db_mutex](D)) after -** all calls to the interfaces listed here are completed. -** -** If an interface fails with SQLITE_MISUSE, that means the interface -** was invoked incorrectly by the application. In that case, the -** error code and message may or may not be set. -*/ -int sqlite3_errcode(sqlite3* db); -int sqlite3_extended_errcode(sqlite3* db); -const(char)* sqlite3_errmsg(sqlite3*); -const(void)* sqlite3_errmsg16(sqlite3*); -const(char)* sqlite3_errstr(int); - -/* -** CAPI3REF: Prepared Statement Object -** KEYWORDS: {prepared statement} {prepared statements} -** -** An instance of this object represents a single SQL statement that -** has been compiled into binary form and is ready to be evaluated. -** -** Think of each SQL statement as a separate computer program. The -** original SQL text is source code. A prepared statement object -** is the compiled object code. All SQL must be converted into a -** prepared statement before it can be run. -** -** The life-cycle of a prepared statement object usually goes like this: -** -** <ol> -** <li> Create the prepared statement object using [sqlite3_prepare_v2()]. -** <li> Bind values to [parameters] using the sqlite3_bind_*() -** interfaces. -** <li> Run the SQL by calling [sqlite3_step()] one or more times. -** <li> Reset the prepared statement using [sqlite3_reset()] then go back -** to step 2. Do this zero or more times. -** <li> Destroy the object using [sqlite3_finalize()]. -** </ol> -*/ -struct sqlite3_stmt; - -/* -** CAPI3REF: Run-time Limits -** METHOD: sqlite3 -** -** ^(This interface allows the size of various constructs to be limited -** on a connection by connection basis. The first parameter is the -** [database connection] whose limit is to be set or queried. The -** second parameter is one of the [limit categories] that define a -** class of constructs to be size limited. The third parameter is the -** new limit for that construct.)^ -** -** ^If the new limit is a negative number, the limit is unchanged. -** ^(For each limit category SQLITE_LIMIT_<i>NAME</i> there is a -** [limits | hard upper bound] -** set at compile-time by a C preprocessor macro called -** [limits | SQLITE_MAX_<i>NAME</i>]. -** (The "_LIMIT_" in the name is changed to "_MAX_".))^ -** ^Attempts to increase a limit above its hard upper bound are -** silently truncated to the hard upper bound. -** -** ^Regardless of whether or not the limit was changed, the -** [sqlite3_limit()] interface returns the prior value of the limit. -** ^Hence, to find the current value of a limit without changing it, -** simply invoke this interface with the third parameter set to -1. -** -** Run-time limits are intended for use in applications that manage -** both their own internal database and also databases that are controlled -** by untrusted external sources. An example application might be a -** web browser that has its own databases for storing history and -** separate databases controlled by JavaScript applications downloaded -** off the Internet. The internal databases can be given the -** large, default limits. Databases managed by external sources can -** be given much smaller limits designed to prevent a denial of service -** attack. Developers might also want to use the [sqlite3_set_authorizer()] -** interface to further control untrusted SQL. The size of the database -** created by an untrusted script can be contained using the -** [max_page_count] [PRAGMA]. -** -** New run-time limit categories may be added in future releases. -*/ -int sqlite3_limit(sqlite3*, int id, int newVal); - -/* -** CAPI3REF: Run-Time Limit Categories -** KEYWORDS: {limit category} {*limit categories} -** -** These constants define various performance limits -** that can be lowered at run-time using [sqlite3_limit()]. -** The synopsis of the meanings of the various limits is shown below. -** Additional information is available at [limits | Limits in SQLite]. -** -** <dl> -** [[SQLITE_LIMIT_LENGTH]] ^(<dt>SQLITE_LIMIT_LENGTH</dt> -** <dd>The maximum size of any string or BLOB or table row, in bytes.<dd>)^ -** -** [[SQLITE_LIMIT_SQL_LENGTH]] ^(<dt>SQLITE_LIMIT_SQL_LENGTH</dt> -** <dd>The maximum length of an SQL statement, in bytes.</dd>)^ -** -** [[SQLITE_LIMIT_COLUMN]] ^(<dt>SQLITE_LIMIT_COLUMN</dt> -** <dd>The maximum number of columns in a table definition or in the -** result set of a [SELECT] or the maximum number of columns in an index -** or in an ORDER BY or GROUP BY clause.</dd>)^ -** -** [[SQLITE_LIMIT_EXPR_DEPTH]] ^(<dt>SQLITE_LIMIT_EXPR_DEPTH</dt> -** <dd>The maximum depth of the parse tree on any expression.</dd>)^ -** -** [[SQLITE_LIMIT_COMPOUND_SELECT]] ^(<dt>SQLITE_LIMIT_COMPOUND_SELECT</dt> -** <dd>The maximum number of terms in a compound SELECT statement.</dd>)^ -** -** [[SQLITE_LIMIT_VDBE_OP]] ^(<dt>SQLITE_LIMIT_VDBE_OP</dt> -** <dd>The maximum number of instructions in a virtual machine program -** used to implement an SQL statement. If [sqlite3_prepare_v2()] or -** the equivalent tries to allocate space for more than this many opcodes -** in a single prepared statement, an SQLITE_NOMEM error is returned.</dd>)^ -** -** [[SQLITE_LIMIT_FUNCTION_ARG]] ^(<dt>SQLITE_LIMIT_FUNCTION_ARG</dt> -** <dd>The maximum number of arguments on a function.</dd>)^ -** -** [[SQLITE_LIMIT_ATTACHED]] ^(<dt>SQLITE_LIMIT_ATTACHED</dt> -** <dd>The maximum number of [ATTACH | attached databases].)^</dd> -** -** [[SQLITE_LIMIT_LIKE_PATTERN_LENGTH]] -** ^(<dt>SQLITE_LIMIT_LIKE_PATTERN_LENGTH</dt> -** <dd>The maximum length of the pattern argument to the [LIKE] or -** [GLOB] operators.</dd>)^ -** -** [[SQLITE_LIMIT_VARIABLE_NUMBER]] -** ^(<dt>SQLITE_LIMIT_VARIABLE_NUMBER</dt> -** <dd>The maximum index number of any [parameter] in an SQL statement.)^ -** -** [[SQLITE_LIMIT_TRIGGER_DEPTH]] ^(<dt>SQLITE_LIMIT_TRIGGER_DEPTH</dt> -** <dd>The maximum depth of recursion for triggers.</dd>)^ -** -** [[SQLITE_LIMIT_WORKER_THREADS]] ^(<dt>SQLITE_LIMIT_WORKER_THREADS</dt> -** <dd>The maximum number of auxiliary worker threads that a single -** [prepared statement] may start.</dd>)^ -** </dl> -*/ -enum SQLITE_LIMIT_LENGTH = 0; -enum SQLITE_LIMIT_SQL_LENGTH = 1; -enum SQLITE_LIMIT_COLUMN = 2; -enum SQLITE_LIMIT_EXPR_DEPTH = 3; -enum SQLITE_LIMIT_COMPOUND_SELECT = 4; -enum SQLITE_LIMIT_VDBE_OP = 5; -enum SQLITE_LIMIT_FUNCTION_ARG = 6; -enum SQLITE_LIMIT_ATTACHED = 7; -enum SQLITE_LIMIT_LIKE_PATTERN_LENGTH = 8; -enum SQLITE_LIMIT_VARIABLE_NUMBER = 9; -enum SQLITE_LIMIT_TRIGGER_DEPTH = 10; -enum SQLITE_LIMIT_WORKER_THREADS = 11; - -/* -** CAPI3REF: Prepare Flags -** -** These constants define various flags that can be passed into -** "prepFlags" parameter of the [sqlite3_prepare_v3()] and -** [sqlite3_prepare16_v3()] interfaces. -** -** New flags may be added in future releases of SQLite. -** -** <dl> -** [[SQLITE_PREPARE_PERSISTENT]] ^(<dt>SQLITE_PREPARE_PERSISTENT</dt> -** <dd>The SQLITE_PREPARE_PERSISTENT flag is a hint to the query planner -** that the prepared statement will be retained for a long time and -** probably reused many times.)^ ^Without this flag, [sqlite3_prepare_v3()] -** and [sqlite3_prepare16_v3()] assume that the prepared statement will -** be used just once or at most a few times and then destroyed using -** [sqlite3_finalize()] relatively soon. The current implementation acts -** on this hint by avoiding the use of [lookaside memory] so as not to -** deplete the limited store of lookaside memory. Future versions of -** SQLite may act on this hint differently. -** </dl> -*/ -enum SQLITE_PREPARE_PERSISTENT = 0x01; - -/* -** CAPI3REF: Compiling An SQL Statement -** KEYWORDS: {SQL statement compiler} -** METHOD: sqlite3 -** CONSTRUCTOR: sqlite3_stmt -** -** To execute an SQL statement, it must first be compiled into a byte-code -** program using one of these routines. Or, in other words, these routines -** are constructors for the [prepared statement] object. -** -** The preferred routine to use is [sqlite3_prepare_v2()]. The -** [sqlite3_prepare()] interface is legacy and should be avoided. -** [sqlite3_prepare_v3()] has an extra "prepFlags" option that is used -** for special purposes. -** -** The use of the UTF-8 interfaces is preferred, as SQLite currently -** does all parsing using UTF-8. The UTF-16 interfaces are provided -** as a convenience. The UTF-16 interfaces work by converting the -** input text into UTF-8, then invoking the corresponding UTF-8 interface. -** -** The first argument, "db", is a [database connection] obtained from a -** prior successful call to [sqlite3_open()], [sqlite3_open_v2()] or -** [sqlite3_open16()]. The database connection must not have been closed. -** -** The second argument, "zSql", is the statement to be compiled, encoded -** as either UTF-8 or UTF-16. The sqlite3_prepare(), sqlite3_prepare_v2(), -** and sqlite3_prepare_v3() -** interfaces use UTF-8, and sqlite3_prepare16(), sqlite3_prepare16_v2(), -** and sqlite3_prepare16_v3() use UTF-16. -** -** ^If the nByte argument is negative, then zSql is read up to the -** first zero terminator. ^If nByte is positive, then it is the -** number of bytes read from zSql. ^If nByte is zero, then no prepared -** statement is generated. -** If the caller knows that the supplied string is nul-terminated, then -** there is a small performance advantage to passing an nByte parameter that -** is the number of bytes in the input string <i>including</i> -** the nul-terminator. -** -** ^If pzTail is not NULL then *pzTail is made to point to the first byte -** past the end of the first SQL statement in zSql. These routines only -** compile the first statement in zSql, so *pzTail is left pointing to -** what remains uncompiled. -** -** ^*ppStmt is left pointing to a compiled [prepared statement] that can be -** executed using [sqlite3_step()]. ^If there is an error, *ppStmt is set -** to NULL. ^If the input text contains no SQL (if the input is an empty -** string or a comment) then *ppStmt is set to NULL. -** The calling procedure is responsible for deleting the compiled -** SQL statement using [sqlite3_finalize()] after it has finished with it. -** ppStmt may not be NULL. -** -** ^On success, the sqlite3_prepare() family of routines return [SQLITE_OK]; -** otherwise an [error code] is returned. -** -** The sqlite3_prepare_v2(), sqlite3_prepare_v3(), sqlite3_prepare16_v2(), -** and sqlite3_prepare16_v3() interfaces are recommended for all new programs. -** The older interfaces (sqlite3_prepare() and sqlite3_prepare16()) -** are retained for backwards compatibility, but their use is discouraged. -** ^In the "vX" interfaces, the prepared statement -** that is returned (the [sqlite3_stmt] object) contains a copy of the -** original SQL text. This causes the [sqlite3_step()] interface to -** behave differently in three ways: -** -** <ol> -** <li> -** ^If the database schema changes, instead of returning [SQLITE_SCHEMA] as it -** always used to do, [sqlite3_step()] will automatically recompile the SQL -** statement and try to run it again. As many as [SQLITE_MAX_SCHEMA_RETRY] -** retries will occur before sqlite3_step() gives up and returns an error. -** </li> -** -** <li> -** ^When an error occurs, [sqlite3_step()] will return one of the detailed -** [error codes] or [extended error codes]. ^The legacy behavior was that -** [sqlite3_step()] would only return a generic [SQLITE_ERROR] result code -** and the application would have to make a second call to [sqlite3_reset()] -** in order to find the underlying cause of the problem. With the "v2" prepare -** interfaces, the underlying reason for the error is returned immediately. -** </li> -** -** <li> -** ^If the specific value bound to [parameter | host parameter] in the -** WHERE clause might influence the choice of query plan for a statement, -** then the statement will be automatically recompiled, as if there had been -** a schema change, on the first [sqlite3_step()] call following any change -** to the [sqlite3_bind_text | bindings] of that [parameter]. -** ^The specific value of WHERE-clause [parameter] might influence the -** choice of query plan if the parameter is the left-hand side of a [LIKE] -** or [GLOB] operator or if the parameter is compared to an indexed column -** and the [SQLITE_ENABLE_STAT3] compile-time option is enabled. -** </li> -** </ol> -** -** <p>^sqlite3_prepare_v3() differs from sqlite3_prepare_v2() only in having -** the extra prepFlags parameter, which is a bit array consisting of zero or -** more of the [SQLITE_PREPARE_PERSISTENT|SQLITE_PREPARE_*] flags. ^The -** sqlite3_prepare_v2() interface works exactly the same as -** sqlite3_prepare_v3() with a zero prepFlags parameter. -*/ -/* Database handle */ -/* SQL statement, UTF-8 encoded */ -/* Maximum length of zSql in bytes. */ -/* OUT: Statement handle */ -/* OUT: Pointer to unused portion of zSql */ -int sqlite3_prepare( - sqlite3* db, - const(char)* zSql, - int nByte, - sqlite3_stmt** ppStmt, - const(char*)* pzTail); - -/* Database handle */ -/* SQL statement, UTF-8 encoded */ -/* Maximum length of zSql in bytes. */ -/* OUT: Statement handle */ -/* OUT: Pointer to unused portion of zSql */ -int sqlite3_prepare_v2( - sqlite3* db, - const(char)* zSql, - int nByte, - sqlite3_stmt** ppStmt, - const(char*)* pzTail); - -/* Database handle */ -/* SQL statement, UTF-8 encoded */ -/* Maximum length of zSql in bytes. */ -/* Zero or more SQLITE_PREPARE_ flags */ -/* OUT: Statement handle */ -/* OUT: Pointer to unused portion of zSql */ -int sqlite3_prepare_v3( - sqlite3* db, - const(char)* zSql, - int nByte, - uint prepFlags, - sqlite3_stmt** ppStmt, - const(char*)* pzTail); - -/* Database handle */ -/* SQL statement, UTF-16 encoded */ -/* Maximum length of zSql in bytes. */ -/* OUT: Statement handle */ -/* OUT: Pointer to unused portion of zSql */ -int sqlite3_prepare16( - sqlite3* db, - const(void)* zSql, - int nByte, - sqlite3_stmt** ppStmt, - const(void*)* pzTail); - -/* Database handle */ -/* SQL statement, UTF-16 encoded */ -/* Maximum length of zSql in bytes. */ -/* OUT: Statement handle */ -/* OUT: Pointer to unused portion of zSql */ -int sqlite3_prepare16_v2( - sqlite3* db, - const(void)* zSql, - int nByte, - sqlite3_stmt** ppStmt, - const(void*)* pzTail); - -/* Database handle */ -/* SQL statement, UTF-16 encoded */ -/* Maximum length of zSql in bytes. */ -/* Zero or more SQLITE_PREPARE_ flags */ -/* OUT: Statement handle */ -/* OUT: Pointer to unused portion of zSql */ -int sqlite3_prepare16_v3( - sqlite3* db, - const(void)* zSql, - int nByte, - uint prepFlags, - sqlite3_stmt** ppStmt, - const(void*)* pzTail); - -/* -** CAPI3REF: Retrieving Statement SQL -** METHOD: sqlite3_stmt -** -** ^The sqlite3_sql(P) interface returns a pointer to a copy of the UTF-8 -** SQL text used to create [prepared statement] P if P was -** created by [sqlite3_prepare_v2()], [sqlite3_prepare_v3()], -** [sqlite3_prepare16_v2()], or [sqlite3_prepare16_v3()]. -** ^The sqlite3_expanded_sql(P) interface returns a pointer to a UTF-8 -** string containing the SQL text of prepared statement P with -** [bound parameters] expanded. -** -** ^(For example, if a prepared statement is created using the SQL -** text "SELECT $abc,:xyz" and if parameter $abc is bound to integer 2345 -** and parameter :xyz is unbound, then sqlite3_sql() will return -** the original string, "SELECT $abc,:xyz" but sqlite3_expanded_sql() -** will return "SELECT 2345,NULL".)^ -** -** ^The sqlite3_expanded_sql() interface returns NULL if insufficient memory -** is available to hold the result, or if the result would exceed the -** the maximum string length determined by the [SQLITE_LIMIT_LENGTH]. -** -** ^The [SQLITE_TRACE_SIZE_LIMIT] compile-time option limits the size of -** bound parameter expansions. ^The [SQLITE_OMIT_TRACE] compile-time -** option causes sqlite3_expanded_sql() to always return NULL. -** -** ^The string returned by sqlite3_sql(P) is managed by SQLite and is -** automatically freed when the prepared statement is finalized. -** ^The string returned by sqlite3_expanded_sql(P), on the other hand, -** is obtained from [sqlite3_malloc()] and must be free by the application -** by passing it to [sqlite3_free()]. -*/ -const(char)* sqlite3_sql(sqlite3_stmt* pStmt); -char* sqlite3_expanded_sql(sqlite3_stmt* pStmt); - -/* -** CAPI3REF: Determine If An SQL Statement Writes The Database -** METHOD: sqlite3_stmt -** -** ^The sqlite3_stmt_readonly(X) interface returns true (non-zero) if -** and only if the [prepared statement] X makes no direct changes to -** the content of the database file. -** -** Note that [application-defined SQL functions] or -** [virtual tables] might change the database indirectly as a side effect. -** ^(For example, if an application defines a function "eval()" that -** calls [sqlite3_exec()], then the following SQL statement would -** change the database file through side-effects: -** -** <blockquote><pre> -** SELECT eval('DELETE FROM t1') FROM t2; -** </pre></blockquote> -** -** But because the [SELECT] statement does not change the database file -** directly, sqlite3_stmt_readonly() would still return true.)^ -** -** ^Transaction control statements such as [BEGIN], [COMMIT], [ROLLBACK], -** [SAVEPOINT], and [RELEASE] cause sqlite3_stmt_readonly() to return true, -** since the statements themselves do not actually modify the database but -** rather they control the timing of when other statements modify the -** database. ^The [ATTACH] and [DETACH] statements also cause -** sqlite3_stmt_readonly() to return true since, while those statements -** change the configuration of a database connection, they do not make -** changes to the content of the database files on disk. -** ^The sqlite3_stmt_readonly() interface returns true for [BEGIN] since -** [BEGIN] merely sets internal flags, but the [BEGIN|BEGIN IMMEDIATE] and -** [BEGIN|BEGIN EXCLUSIVE] commands do touch the database and so -** sqlite3_stmt_readonly() returns false for those commands. -*/ -int sqlite3_stmt_readonly(sqlite3_stmt* pStmt); - -/* -** CAPI3REF: Determine If A Prepared Statement Has Been Reset -** METHOD: sqlite3_stmt -** -** ^The sqlite3_stmt_busy(S) interface returns true (non-zero) if the -** [prepared statement] S has been stepped at least once using -** [sqlite3_step(S)] but has neither run to completion (returned -** [SQLITE_DONE] from [sqlite3_step(S)]) nor -** been reset using [sqlite3_reset(S)]. ^The sqlite3_stmt_busy(S) -** interface returns false if S is a NULL pointer. If S is not a -** NULL pointer and is not a pointer to a valid [prepared statement] -** object, then the behavior is undefined and probably undesirable. -** -** This interface can be used in combination [sqlite3_next_stmt()] -** to locate all prepared statements associated with a database -** connection that are in need of being reset. This can be used, -** for example, in diagnostic routines to search for prepared -** statements that are holding a transaction open. -*/ -int sqlite3_stmt_busy(sqlite3_stmt*); - -/* -** CAPI3REF: Dynamically Typed Value Object -** KEYWORDS: {protected sqlite3_value} {unprotected sqlite3_value} -** -** SQLite uses the sqlite3_value object to represent all values -** that can be stored in a database table. SQLite uses dynamic typing -** for the values it stores. ^Values stored in sqlite3_value objects -** can be integers, floating point values, strings, BLOBs, or NULL. -** -** An sqlite3_value object may be either "protected" or "unprotected". -** Some interfaces require a protected sqlite3_value. Other interfaces -** will accept either a protected or an unprotected sqlite3_value. -** Every interface that accepts sqlite3_value arguments specifies -** whether or not it requires a protected sqlite3_value. The -** [sqlite3_value_dup()] interface can be used to construct a new -** protected sqlite3_value from an unprotected sqlite3_value. -** -** The terms "protected" and "unprotected" refer to whether or not -** a mutex is held. An internal mutex is held for a protected -** sqlite3_value object but no mutex is held for an unprotected -** sqlite3_value object. If SQLite is compiled to be single-threaded -** (with [SQLITE_THREADSAFE=0] and with [sqlite3_threadsafe()] returning 0) -** or if SQLite is run in one of reduced mutex modes -** [SQLITE_CONFIG_SINGLETHREAD] or [SQLITE_CONFIG_MULTITHREAD] -** then there is no distinction between protected and unprotected -** sqlite3_value objects and they can be used interchangeably. However, -** for maximum code portability it is recommended that applications -** still make the distinction between protected and unprotected -** sqlite3_value objects even when not strictly required. -** -** ^The sqlite3_value objects that are passed as parameters into the -** implementation of [application-defined SQL functions] are protected. -** ^The sqlite3_value object returned by -** [sqlite3_column_value()] is unprotected. -** Unprotected sqlite3_value objects may only be used as arguments -** to [sqlite3_result_value()], [sqlite3_bind_value()], and -** [sqlite3_value_dup()]. -** The [sqlite3_value_blob | sqlite3_value_type()] family of -** interfaces require protected sqlite3_value objects. -*/ -struct sqlite3_value; - -/* -** CAPI3REF: SQL Function Context Object -** -** The context in which an SQL function executes is stored in an -** sqlite3_context object. ^A pointer to an sqlite3_context object -** is always first parameter to [application-defined SQL functions]. -** The application-defined SQL function implementation will pass this -** pointer through into calls to [sqlite3_result_int | sqlite3_result()], -** [sqlite3_aggregate_context()], [sqlite3_user_data()], -** [sqlite3_context_db_handle()], [sqlite3_get_auxdata()], -** and/or [sqlite3_set_auxdata()]. -*/ -struct sqlite3_context; - -/* -** CAPI3REF: Binding Values To Prepared Statements -** KEYWORDS: {host parameter} {host parameters} {host parameter name} -** KEYWORDS: {SQL parameter} {SQL parameters} {parameter binding} -** METHOD: sqlite3_stmt -** -** ^(In the SQL statement text input to [sqlite3_prepare_v2()] and its variants, -** literals may be replaced by a [parameter] that matches one of following -** templates: -** -** <ul> -** <li> ? -** <li> ?NNN -** <li> :VVV -** <li> @VVV -** <li> $VVV -** </ul> -** -** In the templates above, NNN represents an integer literal, -** and VVV represents an alphanumeric identifier.)^ ^The values of these -** parameters (also called "host parameter names" or "SQL parameters") -** can be set using the sqlite3_bind_*() routines defined here. -** -** ^The first argument to the sqlite3_bind_*() routines is always -** a pointer to the [sqlite3_stmt] object returned from -** [sqlite3_prepare_v2()] or its variants. -** -** ^The second argument is the index of the SQL parameter to be set. -** ^The leftmost SQL parameter has an index of 1. ^When the same named -** SQL parameter is used more than once, second and subsequent -** occurrences have the same index as the first occurrence. -** ^The index for named parameters can be looked up using the -** [sqlite3_bind_parameter_index()] API if desired. ^The index -** for "?NNN" parameters is the value of NNN. -** ^The NNN value must be between 1 and the [sqlite3_limit()] -** parameter [SQLITE_LIMIT_VARIABLE_NUMBER] (default value: 999). -** -** ^The third argument is the value to bind to the parameter. -** ^If the third parameter to sqlite3_bind_text() or sqlite3_bind_text16() -** or sqlite3_bind_blob() is a NULL pointer then the fourth parameter -** is ignored and the end result is the same as sqlite3_bind_null(). -** -** ^(In those routines that have a fourth argument, its value is the -** number of bytes in the parameter. To be clear: the value is the -** number of <u>bytes</u> in the value, not the number of characters.)^ -** ^If the fourth parameter to sqlite3_bind_text() or sqlite3_bind_text16() -** is negative, then the length of the string is -** the number of bytes up to the first zero terminator. -** If the fourth parameter to sqlite3_bind_blob() is negative, then -** the behavior is undefined. -** If a non-negative fourth parameter is provided to sqlite3_bind_text() -** or sqlite3_bind_text16() or sqlite3_bind_text64() then -** that parameter must be the byte offset -** where the NUL terminator would occur assuming the string were NUL -** terminated. If any NUL characters occur at byte offsets less than -** the value of the fourth parameter then the resulting string value will -** contain embedded NULs. The result of expressions involving strings -** with embedded NULs is undefined. -** -** ^The fifth argument to the BLOB and string binding interfaces -** is a destructor used to dispose of the BLOB or -** string after SQLite has finished with it. ^The destructor is called -** to dispose of the BLOB or string even if the call to bind API fails. -** ^If the fifth argument is -** the special value [SQLITE_STATIC], then SQLite assumes that the -** information is in static, unmanaged space and does not need to be freed. -** ^If the fifth argument has the value [SQLITE_TRANSIENT], then -** SQLite makes its own private copy of the data immediately, before -** the sqlite3_bind_*() routine returns. -** -** ^The sixth argument to sqlite3_bind_text64() must be one of -** [SQLITE_UTF8], [SQLITE_UTF16], [SQLITE_UTF16BE], or [SQLITE_UTF16LE] -** to specify the encoding of the text in the third parameter. If -** the sixth argument to sqlite3_bind_text64() is not one of the -** allowed values shown above, or if the text encoding is different -** from the encoding specified by the sixth parameter, then the behavior -** is undefined. -** -** ^The sqlite3_bind_zeroblob() routine binds a BLOB of length N that -** is filled with zeroes. ^A zeroblob uses a fixed amount of memory -** (just an integer to hold its size) while it is being processed. -** Zeroblobs are intended to serve as placeholders for BLOBs whose -** content is later written using -** [sqlite3_blob_open | incremental BLOB I/O] routines. -** ^A negative value for the zeroblob results in a zero-length BLOB. -** -** ^The sqlite3_bind_pointer(S,I,P,T,D) routine causes the I-th parameter in -** [prepared statement] S to have an SQL value of NULL, but to also be -** associated with the pointer P of type T. ^D is either a NULL pointer or -** a pointer to a destructor function for P. ^SQLite will invoke the -** destructor D with a single argument of P when it is finished using -** P. The T parameter should be a static string, preferably a string -** literal. The sqlite3_bind_pointer() routine is part of the -** [pointer passing interface] added for SQLite 3.20.0. -** -** ^If any of the sqlite3_bind_*() routines are called with a NULL pointer -** for the [prepared statement] or with a prepared statement for which -** [sqlite3_step()] has been called more recently than [sqlite3_reset()], -** then the call will return [SQLITE_MISUSE]. If any sqlite3_bind_() -** routine is passed a [prepared statement] that has been finalized, the -** result is undefined and probably harmful. -** -** ^Bindings are not cleared by the [sqlite3_reset()] routine. -** ^Unbound parameters are interpreted as NULL. -** -** ^The sqlite3_bind_* routines return [SQLITE_OK] on success or an -** [error code] if anything goes wrong. -** ^[SQLITE_TOOBIG] might be returned if the size of a string or BLOB -** exceeds limits imposed by [sqlite3_limit]([SQLITE_LIMIT_LENGTH]) or -** [SQLITE_MAX_LENGTH]. -** ^[SQLITE_RANGE] is returned if the parameter -** index is out of range. ^[SQLITE_NOMEM] is returned if malloc() fails. -** -** See also: [sqlite3_bind_parameter_count()], -** [sqlite3_bind_parameter_name()], and [sqlite3_bind_parameter_index()]. -*/ -int sqlite3_bind_blob(sqlite3_stmt*, int, const(void)*, int n, void function(void*)); -int sqlite3_bind_blob64( - sqlite3_stmt*, - int, - const(void)*, - sqlite3_uint64, - void function(void*)); -int sqlite3_bind_double(sqlite3_stmt*, int, double); -int sqlite3_bind_int(sqlite3_stmt*, int, int); -int sqlite3_bind_int64(sqlite3_stmt*, int, sqlite3_int64); -int sqlite3_bind_null(sqlite3_stmt*, int); -int sqlite3_bind_text(sqlite3_stmt*, int, const(char)*, int, void function(void*)); -int sqlite3_bind_text16(sqlite3_stmt*, int, const(void)*, int, void function(void*)); -int sqlite3_bind_text64( - sqlite3_stmt*, - int, - const(char)*, - sqlite3_uint64, - void function(void*), - ubyte encoding); -int sqlite3_bind_value(sqlite3_stmt*, int, const(sqlite3_value)*); -int sqlite3_bind_pointer(sqlite3_stmt*, int, void*, const(char)*, void function(void*)); -int sqlite3_bind_zeroblob(sqlite3_stmt*, int, int n); -int sqlite3_bind_zeroblob64(sqlite3_stmt*, int, sqlite3_uint64); - -/* -** CAPI3REF: Number Of SQL Parameters -** METHOD: sqlite3_stmt -** -** ^This routine can be used to find the number of [SQL parameters] -** in a [prepared statement]. SQL parameters are tokens of the -** form "?", "?NNN", ":AAA", "$AAA", or "@AAA" that serve as -** placeholders for values that are [sqlite3_bind_blob | bound] -** to the parameters at a later time. -** -** ^(This routine actually returns the index of the largest (rightmost) -** parameter. For all forms except ?NNN, this will correspond to the -** number of unique parameters. If parameters of the ?NNN form are used, -** there may be gaps in the list.)^ -** -** See also: [sqlite3_bind_blob|sqlite3_bind()], -** [sqlite3_bind_parameter_name()], and -** [sqlite3_bind_parameter_index()]. -*/ -int sqlite3_bind_parameter_count(sqlite3_stmt*); - -/* -** CAPI3REF: Name Of A Host Parameter -** METHOD: sqlite3_stmt -** -** ^The sqlite3_bind_parameter_name(P,N) interface returns -** the name of the N-th [SQL parameter] in the [prepared statement] P. -** ^(SQL parameters of the form "?NNN" or ":AAA" or "@AAA" or "$AAA" -** have a name which is the string "?NNN" or ":AAA" or "@AAA" or "$AAA" -** respectively. -** In other words, the initial ":" or "$" or "@" or "?" -** is included as part of the name.)^ -** ^Parameters of the form "?" without a following integer have no name -** and are referred to as "nameless" or "anonymous parameters". -** -** ^The first host parameter has an index of 1, not 0. -** -** ^If the value N is out of range or if the N-th parameter is -** nameless, then NULL is returned. ^The returned string is -** always in UTF-8 encoding even if the named parameter was -** originally specified as UTF-16 in [sqlite3_prepare16()], -** [sqlite3_prepare16_v2()], or [sqlite3_prepare16_v3()]. -** -** See also: [sqlite3_bind_blob|sqlite3_bind()], -** [sqlite3_bind_parameter_count()], and -** [sqlite3_bind_parameter_index()]. -*/ -const(char)* sqlite3_bind_parameter_name(sqlite3_stmt*, int); - -/* -** CAPI3REF: Index Of A Parameter With A Given Name -** METHOD: sqlite3_stmt -** -** ^Return the index of an SQL parameter given its name. ^The -** index value returned is suitable for use as the second -** parameter to [sqlite3_bind_blob|sqlite3_bind()]. ^A zero -** is returned if no matching parameter is found. ^The parameter -** name must be given in UTF-8 even if the original statement -** was prepared from UTF-16 text using [sqlite3_prepare16_v2()] or -** [sqlite3_prepare16_v3()]. -** -** See also: [sqlite3_bind_blob|sqlite3_bind()], -** [sqlite3_bind_parameter_count()], and -** [sqlite3_bind_parameter_name()]. -*/ -int sqlite3_bind_parameter_index(sqlite3_stmt*, const(char)* zName); - -/* -** CAPI3REF: Reset All Bindings On A Prepared Statement -** METHOD: sqlite3_stmt -** -** ^Contrary to the intuition of many, [sqlite3_reset()] does not reset -** the [sqlite3_bind_blob | bindings] on a [prepared statement]. -** ^Use this routine to reset all host parameters to NULL. -*/ -int sqlite3_clear_bindings(sqlite3_stmt*); - -/* -** CAPI3REF: Number Of Columns In A Result Set -** METHOD: sqlite3_stmt -** -** ^Return the number of columns in the result set returned by the -** [prepared statement]. ^If this routine returns 0, that means the -** [prepared statement] returns no data (for example an [UPDATE]). -** ^However, just because this routine returns a positive number does not -** mean that one or more rows of data will be returned. ^A SELECT statement -** will always have a positive sqlite3_column_count() but depending on the -** WHERE clause constraints and the table content, it might return no rows. -** -** See also: [sqlite3_data_count()] -*/ -int sqlite3_column_count(sqlite3_stmt* pStmt); - -/* -** CAPI3REF: Column Names In A Result Set -** METHOD: sqlite3_stmt -** -** ^These routines return the name assigned to a particular column -** in the result set of a [SELECT] statement. ^The sqlite3_column_name() -** interface returns a pointer to a zero-terminated UTF-8 string -** and sqlite3_column_name16() returns a pointer to a zero-terminated -** UTF-16 string. ^The first parameter is the [prepared statement] -** that implements the [SELECT] statement. ^The second parameter is the -** column number. ^The leftmost column is number 0. -** -** ^The returned string pointer is valid until either the [prepared statement] -** is destroyed by [sqlite3_finalize()] or until the statement is automatically -** reprepared by the first call to [sqlite3_step()] for a particular run -** or until the next call to -** sqlite3_column_name() or sqlite3_column_name16() on the same column. -** -** ^If sqlite3_malloc() fails during the processing of either routine -** (for example during a conversion from UTF-8 to UTF-16) then a -** NULL pointer is returned. -** -** ^The name of a result column is the value of the "AS" clause for -** that column, if there is an AS clause. If there is no AS clause -** then the name of the column is unspecified and may change from -** one release of SQLite to the next. -*/ -const(char)* sqlite3_column_name(sqlite3_stmt*, int N); -const(void)* sqlite3_column_name16(sqlite3_stmt*, int N); - -/* -** CAPI3REF: Source Of Data In A Query Result -** METHOD: sqlite3_stmt -** -** ^These routines provide a means to determine the database, table, and -** table column that is the origin of a particular result column in -** [SELECT] statement. -** ^The name of the database or table or column can be returned as -** either a UTF-8 or UTF-16 string. ^The _database_ routines return -** the database name, the _table_ routines return the table name, and -** the origin_ routines return the column name. -** ^The returned string is valid until the [prepared statement] is destroyed -** using [sqlite3_finalize()] or until the statement is automatically -** reprepared by the first call to [sqlite3_step()] for a particular run -** or until the same information is requested -** again in a different encoding. -** -** ^The names returned are the original un-aliased names of the -** database, table, and column. -** -** ^The first argument to these interfaces is a [prepared statement]. -** ^These functions return information about the Nth result column returned by -** the statement, where N is the second function argument. -** ^The left-most column is column 0 for these routines. -** -** ^If the Nth column returned by the statement is an expression or -** subquery and is not a column value, then all of these functions return -** NULL. ^These routine might also return NULL if a memory allocation error -** occurs. ^Otherwise, they return the name of the attached database, table, -** or column that query result column was extracted from. -** -** ^As with all other SQLite APIs, those whose names end with "16" return -** UTF-16 encoded strings and the other functions return UTF-8. -** -** ^These APIs are only available if the library was compiled with the -** [SQLITE_ENABLE_COLUMN_METADATA] C-preprocessor symbol. -** -** If two or more threads call one or more of these routines against the same -** prepared statement and column at the same time then the results are -** undefined. -** -** If two or more threads call one or more -** [sqlite3_column_database_name | column metadata interfaces] -** for the same [prepared statement] and result column -** at the same time then the results are undefined. -*/ -const(char)* sqlite3_column_database_name(sqlite3_stmt*, int); -const(void)* sqlite3_column_database_name16(sqlite3_stmt*, int); -const(char)* sqlite3_column_table_name(sqlite3_stmt*, int); -const(void)* sqlite3_column_table_name16(sqlite3_stmt*, int); -const(char)* sqlite3_column_origin_name(sqlite3_stmt*, int); -const(void)* sqlite3_column_origin_name16(sqlite3_stmt*, int); - -/* -** CAPI3REF: Declared Datatype Of A Query Result -** METHOD: sqlite3_stmt -** -** ^(The first parameter is a [prepared statement]. -** If this statement is a [SELECT] statement and the Nth column of the -** returned result set of that [SELECT] is a table column (not an -** expression or subquery) then the declared type of the table -** column is returned.)^ ^If the Nth column of the result set is an -** expression or subquery, then a NULL pointer is returned. -** ^The returned string is always UTF-8 encoded. -** -** ^(For example, given the database schema: -** -** CREATE TABLE t1(c1 VARIANT); -** -** and the following statement to be compiled: -** -** SELECT c1 + 1, c1 FROM t1; -** -** this routine would return the string "VARIANT" for the second result -** column (i==1), and a NULL pointer for the first result column (i==0).)^ -** -** ^SQLite uses dynamic run-time typing. ^So just because a column -** is declared to contain a particular type does not mean that the -** data stored in that column is of the declared type. SQLite is -** strongly typed, but the typing is dynamic not static. ^Type -** is associated with individual values, not with the containers -** used to hold those values. -*/ -const(char)* sqlite3_column_decltype(sqlite3_stmt*, int); -const(void)* sqlite3_column_decltype16(sqlite3_stmt*, int); - -/* -** CAPI3REF: Evaluate An SQL Statement -** METHOD: sqlite3_stmt -** -** After a [prepared statement] has been prepared using any of -** [sqlite3_prepare_v2()], [sqlite3_prepare_v3()], [sqlite3_prepare16_v2()], -** or [sqlite3_prepare16_v3()] or one of the legacy -** interfaces [sqlite3_prepare()] or [sqlite3_prepare16()], this function -** must be called one or more times to evaluate the statement. -** -** The details of the behavior of the sqlite3_step() interface depend -** on whether the statement was prepared using the newer "vX" interfaces -** [sqlite3_prepare_v3()], [sqlite3_prepare_v2()], [sqlite3_prepare16_v3()], -** [sqlite3_prepare16_v2()] or the older legacy -** interfaces [sqlite3_prepare()] and [sqlite3_prepare16()]. The use of the -** new "vX" interface is recommended for new applications but the legacy -** interface will continue to be supported. -** -** ^In the legacy interface, the return value will be either [SQLITE_BUSY], -** [SQLITE_DONE], [SQLITE_ROW], [SQLITE_ERROR], or [SQLITE_MISUSE]. -** ^With the "v2" interface, any of the other [result codes] or -** [extended result codes] might be returned as well. -** -** ^[SQLITE_BUSY] means that the database engine was unable to acquire the -** database locks it needs to do its job. ^If the statement is a [COMMIT] -** or occurs outside of an explicit transaction, then you can retry the -** statement. If the statement is not a [COMMIT] and occurs within an -** explicit transaction then you should rollback the transaction before -** continuing. -** -** ^[SQLITE_DONE] means that the statement has finished executing -** successfully. sqlite3_step() should not be called again on this virtual -** machine without first calling [sqlite3_reset()] to reset the virtual -** machine back to its initial state. -** -** ^If the SQL statement being executed returns any data, then [SQLITE_ROW] -** is returned each time a new row of data is ready for processing by the -** caller. The values may be accessed using the [column access functions]. -** sqlite3_step() is called again to retrieve the next row of data. -** -** ^[SQLITE_ERROR] means that a run-time error (such as a constraint -** violation) has occurred. sqlite3_step() should not be called again on -** the VM. More information may be found by calling [sqlite3_errmsg()]. -** ^With the legacy interface, a more specific error code (for example, -** [SQLITE_INTERRUPT], [SQLITE_SCHEMA], [SQLITE_CORRUPT], and so forth) -** can be obtained by calling [sqlite3_reset()] on the -** [prepared statement]. ^In the "v2" interface, -** the more specific error code is returned directly by sqlite3_step(). -** -** [SQLITE_MISUSE] means that the this routine was called inappropriately. -** Perhaps it was called on a [prepared statement] that has -** already been [sqlite3_finalize | finalized] or on one that had -** previously returned [SQLITE_ERROR] or [SQLITE_DONE]. Or it could -** be the case that the same database connection is being used by two or -** more threads at the same moment in time. -** -** For all versions of SQLite up to and including 3.6.23.1, a call to -** [sqlite3_reset()] was required after sqlite3_step() returned anything -** other than [SQLITE_ROW] before any subsequent invocation of -** sqlite3_step(). Failure to reset the prepared statement using -** [sqlite3_reset()] would result in an [SQLITE_MISUSE] return from -** sqlite3_step(). But after [version 3.6.23.1] ([dateof:3.6.23.1], -** sqlite3_step() began -** calling [sqlite3_reset()] automatically in this circumstance rather -** than returning [SQLITE_MISUSE]. This is not considered a compatibility -** break because any application that ever receives an SQLITE_MISUSE error -** is broken by definition. The [SQLITE_OMIT_AUTORESET] compile-time option -** can be used to restore the legacy behavior. -** -** <b>Goofy Interface Alert:</b> In the legacy interface, the sqlite3_step() -** API always returns a generic error code, [SQLITE_ERROR], following any -** error other than [SQLITE_BUSY] and [SQLITE_MISUSE]. You must call -** [sqlite3_reset()] or [sqlite3_finalize()] in order to find one of the -** specific [error codes] that better describes the error. -** We admit that this is a goofy design. The problem has been fixed -** with the "v2" interface. If you prepare all of your SQL statements -** using [sqlite3_prepare_v3()] or [sqlite3_prepare_v2()] -** or [sqlite3_prepare16_v2()] or [sqlite3_prepare16_v3()] instead -** of the legacy [sqlite3_prepare()] and [sqlite3_prepare16()] interfaces, -** then the more specific [error codes] are returned directly -** by sqlite3_step(). The use of the "vX" interfaces is recommended. -*/ -int sqlite3_step(sqlite3_stmt*); - -/* -** CAPI3REF: Number of columns in a result set -** METHOD: sqlite3_stmt -** -** ^The sqlite3_data_count(P) interface returns the number of columns in the -** current row of the result set of [prepared statement] P. -** ^If prepared statement P does not have results ready to return -** (via calls to the [sqlite3_column_int | sqlite3_column_*()] of -** interfaces) then sqlite3_data_count(P) returns 0. -** ^The sqlite3_data_count(P) routine also returns 0 if P is a NULL pointer. -** ^The sqlite3_data_count(P) routine returns 0 if the previous call to -** [sqlite3_step](P) returned [SQLITE_DONE]. ^The sqlite3_data_count(P) -** will return non-zero if previous call to [sqlite3_step](P) returned -** [SQLITE_ROW], except in the case of the [PRAGMA incremental_vacuum] -** where it always returns zero since each step of that multi-step -** pragma returns 0 columns of data. -** -** See also: [sqlite3_column_count()] -*/ -int sqlite3_data_count(sqlite3_stmt* pStmt); - -/* -** CAPI3REF: Fundamental Datatypes -** KEYWORDS: SQLITE_TEXT -** -** ^(Every value in SQLite has one of five fundamental datatypes: -** -** <ul> -** <li> 64-bit signed integer -** <li> 64-bit IEEE floating point number -** <li> string -** <li> BLOB -** <li> NULL -** </ul>)^ -** -** These constants are codes for each of those types. -** -** Note that the SQLITE_TEXT constant was also used in SQLite version 2 -** for a completely different meaning. Software that links against both -** SQLite version 2 and SQLite version 3 should use SQLITE3_TEXT, not -** SQLITE_TEXT. -*/ -enum SQLITE_INTEGER = 1; -enum SQLITE_FLOAT = 2; -enum SQLITE_BLOB = 4; -enum SQLITE_NULL = 5; - -enum SQLITE_TEXT = 3; - -enum SQLITE3_TEXT = 3; - -/* -** CAPI3REF: Result Values From A Query -** KEYWORDS: {column access functions} -** METHOD: sqlite3_stmt -** -** <b>Summary:</b> -** <blockquote><table border=0 cellpadding=0 cellspacing=0> -** <tr><td><b>sqlite3_column_blob</b><td>→<td>BLOB result -** <tr><td><b>sqlite3_column_double</b><td>→<td>REAL result -** <tr><td><b>sqlite3_column_int</b><td>→<td>32-bit INTEGER result -** <tr><td><b>sqlite3_column_int64</b><td>→<td>64-bit INTEGER result -** <tr><td><b>sqlite3_column_text</b><td>→<td>UTF-8 TEXT result -** <tr><td><b>sqlite3_column_text16</b><td>→<td>UTF-16 TEXT result -** <tr><td><b>sqlite3_column_value</b><td>→<td>The result as an -** [sqlite3_value|unprotected sqlite3_value] object. -** <tr><td> <td> <td> -** <tr><td><b>sqlite3_column_bytes</b><td>→<td>Size of a BLOB -** or a UTF-8 TEXT result in bytes -** <tr><td><b>sqlite3_column_bytes16 </b> -** <td>→ <td>Size of UTF-16 -** TEXT in bytes -** <tr><td><b>sqlite3_column_type</b><td>→<td>Default -** datatype of the result -** </table></blockquote> -** -** <b>Details:</b> -** -** ^These routines return information about a single column of the current -** result row of a query. ^In every case the first argument is a pointer -** to the [prepared statement] that is being evaluated (the [sqlite3_stmt*] -** that was returned from [sqlite3_prepare_v2()] or one of its variants) -** and the second argument is the index of the column for which information -** should be returned. ^The leftmost column of the result set has the index 0. -** ^The number of columns in the result can be determined using -** [sqlite3_column_count()]. -** -** If the SQL statement does not currently point to a valid row, or if the -** column index is out of range, the result is undefined. -** These routines may only be called when the most recent call to -** [sqlite3_step()] has returned [SQLITE_ROW] and neither -** [sqlite3_reset()] nor [sqlite3_finalize()] have been called subsequently. -** If any of these routines are called after [sqlite3_reset()] or -** [sqlite3_finalize()] or after [sqlite3_step()] has returned -** something other than [SQLITE_ROW], the results are undefined. -** If [sqlite3_step()] or [sqlite3_reset()] or [sqlite3_finalize()] -** are called from a different thread while any of these routines -** are pending, then the results are undefined. -** -** The first six interfaces (_blob, _double, _int, _int64, _text, and _text16) -** each return the value of a result column in a specific data format. If -** the result column is not initially in the requested format (for example, -** if the query returns an integer but the sqlite3_column_text() interface -** is used to extract the value) then an automatic type conversion is performed. -** -** ^The sqlite3_column_type() routine returns the -** [SQLITE_INTEGER | datatype code] for the initial data type -** of the result column. ^The returned value is one of [SQLITE_INTEGER], -** [SQLITE_FLOAT], [SQLITE_TEXT], [SQLITE_BLOB], or [SQLITE_NULL]. -** The return value of sqlite3_column_type() can be used to decide which -** of the first six interface should be used to extract the column value. -** The value returned by sqlite3_column_type() is only meaningful if no -** automatic type conversions have occurred for the value in question. -** After a type conversion, the result of calling sqlite3_column_type() -** is undefined, though harmless. Future -** versions of SQLite may change the behavior of sqlite3_column_type() -** following a type conversion. -** -** If the result is a BLOB or a TEXT string, then the sqlite3_column_bytes() -** or sqlite3_column_bytes16() interfaces can be used to determine the size -** of that BLOB or string. -** -** ^If the result is a BLOB or UTF-8 string then the sqlite3_column_bytes() -** routine returns the number of bytes in that BLOB or string. -** ^If the result is a UTF-16 string, then sqlite3_column_bytes() converts -** the string to UTF-8 and then returns the number of bytes. -** ^If the result is a numeric value then sqlite3_column_bytes() uses -** [sqlite3_snprintf()] to convert that value to a UTF-8 string and returns -** the number of bytes in that string. -** ^If the result is NULL, then sqlite3_column_bytes() returns zero. -** -** ^If the result is a BLOB or UTF-16 string then the sqlite3_column_bytes16() -** routine returns the number of bytes in that BLOB or string. -** ^If the result is a UTF-8 string, then sqlite3_column_bytes16() converts -** the string to UTF-16 and then returns the number of bytes. -** ^If the result is a numeric value then sqlite3_column_bytes16() uses -** [sqlite3_snprintf()] to convert that value to a UTF-16 string and returns -** the number of bytes in that string. -** ^If the result is NULL, then sqlite3_column_bytes16() returns zero. -** -** ^The values returned by [sqlite3_column_bytes()] and -** [sqlite3_column_bytes16()] do not include the zero terminators at the end -** of the string. ^For clarity: the values returned by -** [sqlite3_column_bytes()] and [sqlite3_column_bytes16()] are the number of -** bytes in the string, not the number of characters. -** -** ^Strings returned by sqlite3_column_text() and sqlite3_column_text16(), -** even empty strings, are always zero-terminated. ^The return -** value from sqlite3_column_blob() for a zero-length BLOB is a NULL pointer. -** -** <b>Warning:</b> ^The object returned by [sqlite3_column_value()] is an -** [unprotected sqlite3_value] object. In a multithreaded environment, -** an unprotected sqlite3_value object may only be used safely with -** [sqlite3_bind_value()] and [sqlite3_result_value()]. -** If the [unprotected sqlite3_value] object returned by -** [sqlite3_column_value()] is used in any other way, including calls -** to routines like [sqlite3_value_int()], [sqlite3_value_text()], -** or [sqlite3_value_bytes()], the behavior is not threadsafe. -** Hence, the sqlite3_column_value() interface -** is normally only useful within the implementation of -** [application-defined SQL functions] or [virtual tables], not within -** top-level application code. -** -** The these routines may attempt to convert the datatype of the result. -** ^For example, if the internal representation is FLOAT and a text result -** is requested, [sqlite3_snprintf()] is used internally to perform the -** conversion automatically. ^(The following table details the conversions -** that are applied: -** -** <blockquote> -** <table border="1"> -** <tr><th> Internal<br>Type <th> Requested<br>Type <th> Conversion -** -** <tr><td> NULL <td> INTEGER <td> Result is 0 -** <tr><td> NULL <td> FLOAT <td> Result is 0.0 -** <tr><td> NULL <td> TEXT <td> Result is a NULL pointer -** <tr><td> NULL <td> BLOB <td> Result is a NULL pointer -** <tr><td> INTEGER <td> FLOAT <td> Convert from integer to float -** <tr><td> INTEGER <td> TEXT <td> ASCII rendering of the integer -** <tr><td> INTEGER <td> BLOB <td> Same as INTEGER->TEXT -** <tr><td> FLOAT <td> INTEGER <td> [CAST] to INTEGER -** <tr><td> FLOAT <td> TEXT <td> ASCII rendering of the float -** <tr><td> FLOAT <td> BLOB <td> [CAST] to BLOB -** <tr><td> TEXT <td> INTEGER <td> [CAST] to INTEGER -** <tr><td> TEXT <td> FLOAT <td> [CAST] to REAL -** <tr><td> TEXT <td> BLOB <td> No change -** <tr><td> BLOB <td> INTEGER <td> [CAST] to INTEGER -** <tr><td> BLOB <td> FLOAT <td> [CAST] to REAL -** <tr><td> BLOB <td> TEXT <td> Add a zero terminator if needed -** </table> -** </blockquote>)^ -** -** Note that when type conversions occur, pointers returned by prior -** calls to sqlite3_column_blob(), sqlite3_column_text(), and/or -** sqlite3_column_text16() may be invalidated. -** Type conversions and pointer invalidations might occur -** in the following cases: -** -** <ul> -** <li> The initial content is a BLOB and sqlite3_column_text() or -** sqlite3_column_text16() is called. A zero-terminator might -** need to be added to the string.</li> -** <li> The initial content is UTF-8 text and sqlite3_column_bytes16() or -** sqlite3_column_text16() is called. The content must be converted -** to UTF-16.</li> -** <li> The initial content is UTF-16 text and sqlite3_column_bytes() or -** sqlite3_column_text() is called. The content must be converted -** to UTF-8.</li> -** </ul> -** -** ^Conversions between UTF-16be and UTF-16le are always done in place and do -** not invalidate a prior pointer, though of course the content of the buffer -** that the prior pointer references will have been modified. Other kinds -** of conversion are done in place when it is possible, but sometimes they -** are not possible and in those cases prior pointers are invalidated. -** -** The safest policy is to invoke these routines -** in one of the following ways: -** -** <ul> -** <li>sqlite3_column_text() followed by sqlite3_column_bytes()</li> -** <li>sqlite3_column_blob() followed by sqlite3_column_bytes()</li> -** <li>sqlite3_column_text16() followed by sqlite3_column_bytes16()</li> -** </ul> -** -** In other words, you should call sqlite3_column_text(), -** sqlite3_column_blob(), or sqlite3_column_text16() first to force the result -** into the desired format, then invoke sqlite3_column_bytes() or -** sqlite3_column_bytes16() to find the size of the result. Do not mix calls -** to sqlite3_column_text() or sqlite3_column_blob() with calls to -** sqlite3_column_bytes16(), and do not mix calls to sqlite3_column_text16() -** with calls to sqlite3_column_bytes(). -** -** ^The pointers returned are valid until a type conversion occurs as -** described above, or until [sqlite3_step()] or [sqlite3_reset()] or -** [sqlite3_finalize()] is called. ^The memory space used to hold strings -** and BLOBs is freed automatically. Do not pass the pointers returned -** from [sqlite3_column_blob()], [sqlite3_column_text()], etc. into -** [sqlite3_free()]. -** -** As long as the input parameters are correct, these routines will only -** fail if an out-of-memory error occurs during a format conversion. -** Only the following subset of interfaces are subject to out-of-memory -** errors: -** -** <ul> -** <li> sqlite3_column_blob() -** <li> sqlite3_column_text() -** <li> sqlite3_column_text16() -** <li> sqlite3_column_bytes() -** <li> sqlite3_column_bytes16() -** </ul> -** -** If an out-of-memory error occurs, then the return value from these -** routines is the same as if the column had contained an SQL NULL value. -** Valid SQL NULL returns can be distinguished from out-of-memory errors -** by invoking the [sqlite3_errcode()] immediately after the suspect -** return value is obtained and before any -** other SQLite interface is called on the same [database connection]. -*/ -const(void)* sqlite3_column_blob(sqlite3_stmt*, int iCol); -double sqlite3_column_double(sqlite3_stmt*, int iCol); -int sqlite3_column_int(sqlite3_stmt*, int iCol); -sqlite3_int64 sqlite3_column_int64(sqlite3_stmt*, int iCol); -const(ubyte)* sqlite3_column_text(sqlite3_stmt*, int iCol); -const(void)* sqlite3_column_text16(sqlite3_stmt*, int iCol); -sqlite3_value* sqlite3_column_value(sqlite3_stmt*, int iCol); -int sqlite3_column_bytes(sqlite3_stmt*, int iCol); -int sqlite3_column_bytes16(sqlite3_stmt*, int iCol); -int sqlite3_column_type(sqlite3_stmt*, int iCol); - -/* -** CAPI3REF: Destroy A Prepared Statement Object -** DESTRUCTOR: sqlite3_stmt -** -** ^The sqlite3_finalize() function is called to delete a [prepared statement]. -** ^If the most recent evaluation of the statement encountered no errors -** or if the statement is never been evaluated, then sqlite3_finalize() returns -** SQLITE_OK. ^If the most recent evaluation of statement S failed, then -** sqlite3_finalize(S) returns the appropriate [error code] or -** [extended error code]. -** -** ^The sqlite3_finalize(S) routine can be called at any point during -** the life cycle of [prepared statement] S: -** before statement S is ever evaluated, after -** one or more calls to [sqlite3_reset()], or after any call -** to [sqlite3_step()] regardless of whether or not the statement has -** completed execution. -** -** ^Invoking sqlite3_finalize() on a NULL pointer is a harmless no-op. -** -** The application must finalize every [prepared statement] in order to avoid -** resource leaks. It is a grievous error for the application to try to use -** a prepared statement after it has been finalized. Any use of a prepared -** statement after it has been finalized can result in undefined and -** undesirable behavior such as segfaults and heap corruption. -*/ -int sqlite3_finalize(sqlite3_stmt* pStmt); - -/* -** CAPI3REF: Reset A Prepared Statement Object -** METHOD: sqlite3_stmt -** -** The sqlite3_reset() function is called to reset a [prepared statement] -** object back to its initial state, ready to be re-executed. -** ^Any SQL statement variables that had values bound to them using -** the [sqlite3_bind_blob | sqlite3_bind_*() API] retain their values. -** Use [sqlite3_clear_bindings()] to reset the bindings. -** -** ^The [sqlite3_reset(S)] interface resets the [prepared statement] S -** back to the beginning of its program. -** -** ^If the most recent call to [sqlite3_step(S)] for the -** [prepared statement] S returned [SQLITE_ROW] or [SQLITE_DONE], -** or if [sqlite3_step(S)] has never before been called on S, -** then [sqlite3_reset(S)] returns [SQLITE_OK]. -** -** ^If the most recent call to [sqlite3_step(S)] for the -** [prepared statement] S indicated an error, then -** [sqlite3_reset(S)] returns an appropriate [error code]. -** -** ^The [sqlite3_reset(S)] interface does not change the values -** of any [sqlite3_bind_blob|bindings] on the [prepared statement] S. -*/ -int sqlite3_reset(sqlite3_stmt* pStmt); - -/* -** CAPI3REF: Create Or Redefine SQL Functions -** KEYWORDS: {function creation routines} -** KEYWORDS: {application-defined SQL function} -** KEYWORDS: {application-defined SQL functions} -** METHOD: sqlite3 -** -** ^These functions (collectively known as "function creation routines") -** are used to add SQL functions or aggregates or to redefine the behavior -** of existing SQL functions or aggregates. The only differences between -** the three "sqlite3_create_function*" routines are the text encoding -** expected for the second parameter (the name of the function being -** created) and the presence or absence of a destructor callback for -** the application data pointer. Function sqlite3_create_window_function() -** is similar, but allows the user to supply the extra callback functions -** needed by [aggregate window functions]. -** -** ^The first parameter is the [database connection] to which the SQL -** function is to be added. ^If an application uses more than one database -** connection then application-defined SQL functions must be added -** to each database connection separately. -** -** ^The second parameter is the name of the SQL function to be created or -** redefined. ^The length of the name is limited to 255 bytes in a UTF-8 -** representation, exclusive of the zero-terminator. ^Note that the name -** length limit is in UTF-8 bytes, not characters nor UTF-16 bytes. -** ^Any attempt to create a function with a longer name -** will result in [SQLITE_MISUSE] being returned. -** -** ^The third parameter (nArg) -** is the number of arguments that the SQL function or -** aggregate takes. ^If this parameter is -1, then the SQL function or -** aggregate may take any number of arguments between 0 and the limit -** set by [sqlite3_limit]([SQLITE_LIMIT_FUNCTION_ARG]). If the third -** parameter is less than -1 or greater than 127 then the behavior is -** undefined. -** -** ^The fourth parameter, eTextRep, specifies what -** [SQLITE_UTF8 | text encoding] this SQL function prefers for -** its parameters. The application should set this parameter to -** [SQLITE_UTF16LE] if the function implementation invokes -** [sqlite3_value_text16le()] on an input, or [SQLITE_UTF16BE] if the -** implementation invokes [sqlite3_value_text16be()] on an input, or -** [SQLITE_UTF16] if [sqlite3_value_text16()] is used, or [SQLITE_UTF8] -** otherwise. ^The same SQL function may be registered multiple times using -** different preferred text encodings, with different implementations for -** each encoding. -** ^When multiple implementations of the same function are available, SQLite -** will pick the one that involves the least amount of data conversion. -** -** ^The fourth parameter may optionally be ORed with [SQLITE_DETERMINISTIC] -** to signal that the function will always return the same result given -** the same inputs within a single SQL statement. Most SQL functions are -** deterministic. The built-in [random()] SQL function is an example of a -** function that is not deterministic. The SQLite query planner is able to -** perform additional optimizations on deterministic functions, so use -** of the [SQLITE_DETERMINISTIC] flag is recommended where possible. -** -** ^(The fifth parameter is an arbitrary pointer. The implementation of the -** function can gain access to this pointer using [sqlite3_user_data()].)^ -** -** ^The sixth, seventh and eighth parameters passed to the three -** "sqlite3_create_function*" functions, xFunc, xStep and xFinal, are -** pointers to C-language functions that implement the SQL function or -** aggregate. ^A scalar SQL function requires an implementation of the xFunc -** callback only; NULL pointers must be passed as the xStep and xFinal -** parameters. ^An aggregate SQL function requires an implementation of xStep -** and xFinal and NULL pointer must be passed for xFunc. ^To delete an existing -** SQL function or aggregate, pass NULL pointers for all three function -** callbacks. -** -** ^The sixth, seventh, eighth and ninth parameters (xStep, xFinal, xValue -** and xInverse) passed to sqlite3_create_window_function are pointers to -** C-language callbacks that implement the new function. xStep and xFinal -** must both be non-NULL. xValue and xInverse may either both be NULL, in -** which case a regular aggregate function is created, or must both be -** non-NULL, in which case the new function may be used as either an aggregate -** or aggregate window function. More details regarding the implementation -** of aggregate window functions are -** [user-defined window functions|available here]. -** -** ^(If the final parameter to sqlite3_create_function_v2() or -** sqlite3_create_window_function() is not NULL, then it is destructor for -** the application data pointer. The destructor is invoked when the function -** is deleted, either by being overloaded or when the database connection -** closes.)^ ^The destructor is also invoked if the call to -** sqlite3_create_function_v2() fails. ^When the destructor callback is -** invoked, it is passed a single argument which is a copy of the application -** data pointer which was the fifth parameter to sqlite3_create_function_v2(). -** -** ^It is permitted to register multiple implementations of the same -** functions with the same name but with either differing numbers of -** arguments or differing preferred text encodings. ^SQLite will use -** the implementation that most closely matches the way in which the -** SQL function is used. ^A function implementation with a non-negative -** nArg parameter is a better match than a function implementation with -** a negative nArg. ^A function where the preferred text encoding -** matches the database encoding is a better -** match than a function where the encoding is different. -** ^A function where the encoding difference is between UTF16le and UTF16be -** is a closer match than a function where the encoding difference is -** between UTF8 and UTF16. -** -** ^Built-in functions may be overloaded by new application-defined functions. -** -** ^An application-defined function is permitted to call other -** SQLite interfaces. However, such calls must not -** close the database connection nor finalize or reset the prepared -** statement in which the function is running. -*/ -int sqlite3_create_function( - sqlite3* db, - const(char)* zFunctionName, - int nArg, - int eTextRep, - void* pApp, - void function(sqlite3_context*, int, sqlite3_value**) xFunc, - void function(sqlite3_context*, int, sqlite3_value**) xStep, - void function(sqlite3_context*) xFinal); -int sqlite3_create_function16( - sqlite3* db, - const(void)* zFunctionName, - int nArg, - int eTextRep, - void* pApp, - void function(sqlite3_context*, int, sqlite3_value**) xFunc, - void function(sqlite3_context*, int, sqlite3_value**) xStep, - void function(sqlite3_context*) xFinal); -int sqlite3_create_function_v2( - sqlite3* db, - const(char)* zFunctionName, - int nArg, - int eTextRep, - void* pApp, - void function(sqlite3_context*, int, sqlite3_value**) xFunc, - void function(sqlite3_context*, int, sqlite3_value**) xStep, - void function(sqlite3_context*) xFinal, - void function(void*) xDestroy); -int sqlite3_create_window_function( - sqlite3* db, - const(char)* zFunctionName, - int nArg, - int eTextRep, - void* pApp, - void function(sqlite3_context*, int, sqlite3_value**) xStep, - void function(sqlite3_context*) xFinal, - void function(sqlite3_context*) xValue, - void function(sqlite3_context*, int, sqlite3_value**) xInverse, - void function(void*) xDestroy); - -/* -** CAPI3REF: Text Encodings -** -** These constant define integer codes that represent the various -** text encodings supported by SQLite. -*/ -enum SQLITE_UTF8 = 1; /* IMP: R-37514-35566 */ -enum SQLITE_UTF16LE = 2; /* IMP: R-03371-37637 */ -enum SQLITE_UTF16BE = 3; /* IMP: R-51971-34154 */ -enum SQLITE_UTF16 = 4; /* Use native byte order */ -enum SQLITE_ANY = 5; /* Deprecated */ -enum SQLITE_UTF16_ALIGNED = 8; /* sqlite3_create_collation only */ - -/* -** CAPI3REF: Function Flags -** -** These constants may be ORed together with the -** [SQLITE_UTF8 | preferred text encoding] as the fourth argument -** to [sqlite3_create_function()], [sqlite3_create_function16()], or -** [sqlite3_create_function_v2()]. -*/ -enum SQLITE_DETERMINISTIC = 0x800; - -/* -** CAPI3REF: Deprecated Functions -** DEPRECATED -** -** These functions are [deprecated]. In order to maintain -** backwards compatibility with older code, these functions continue -** to be supported. However, new applications should avoid -** the use of these functions. To encourage programmers to avoid -** these functions, we will not explain what they do. -*/ - -int sqlite3_aggregate_count(sqlite3_context*); -int sqlite3_expired(sqlite3_stmt*); -int sqlite3_transfer_bindings(sqlite3_stmt*, sqlite3_stmt*); -int sqlite3_global_recover(); -void sqlite3_thread_cleanup(); -int sqlite3_memory_alarm( - void function(void*, sqlite3_int64, int), - void*, - sqlite3_int64); - -/* -** CAPI3REF: Obtaining SQL Values -** METHOD: sqlite3_value -** -** <b>Summary:</b> -** <blockquote><table border=0 cellpadding=0 cellspacing=0> -** <tr><td><b>sqlite3_value_blob</b><td>→<td>BLOB value -** <tr><td><b>sqlite3_value_double</b><td>→<td>REAL value -** <tr><td><b>sqlite3_value_int</b><td>→<td>32-bit INTEGER value -** <tr><td><b>sqlite3_value_int64</b><td>→<td>64-bit INTEGER value -** <tr><td><b>sqlite3_value_pointer</b><td>→<td>Pointer value -** <tr><td><b>sqlite3_value_text</b><td>→<td>UTF-8 TEXT value -** <tr><td><b>sqlite3_value_text16</b><td>→<td>UTF-16 TEXT value in -** the native byteorder -** <tr><td><b>sqlite3_value_text16be</b><td>→<td>UTF-16be TEXT value -** <tr><td><b>sqlite3_value_text16le</b><td>→<td>UTF-16le TEXT value -** <tr><td> <td> <td> -** <tr><td><b>sqlite3_value_bytes</b><td>→<td>Size of a BLOB -** or a UTF-8 TEXT in bytes -** <tr><td><b>sqlite3_value_bytes16 </b> -** <td>→ <td>Size of UTF-16 -** TEXT in bytes -** <tr><td><b>sqlite3_value_type</b><td>→<td>Default -** datatype of the value -** <tr><td><b>sqlite3_value_numeric_type </b> -** <td>→ <td>Best numeric datatype of the value -** <tr><td><b>sqlite3_value_nochange </b> -** <td>→ <td>True if the column is unchanged in an UPDATE -** against a virtual table. -** </table></blockquote> -** -** <b>Details:</b> -** -** These routines extract type, size, and content information from -** [protected sqlite3_value] objects. Protected sqlite3_value objects -** are used to pass parameter information into implementation of -** [application-defined SQL functions] and [virtual tables]. -** -** These routines work only with [protected sqlite3_value] objects. -** Any attempt to use these routines on an [unprotected sqlite3_value] -** is not threadsafe. -** -** ^These routines work just like the corresponding [column access functions] -** except that these routines take a single [protected sqlite3_value] object -** pointer instead of a [sqlite3_stmt*] pointer and an integer column number. -** -** ^The sqlite3_value_text16() interface extracts a UTF-16 string -** in the native byte-order of the host machine. ^The -** sqlite3_value_text16be() and sqlite3_value_text16le() interfaces -** extract UTF-16 strings as big-endian and little-endian respectively. -** -** ^If [sqlite3_value] object V was initialized -** using [sqlite3_bind_pointer(S,I,P,X,D)] or [sqlite3_result_pointer(C,P,X,D)] -** and if X and Y are strings that compare equal according to strcmp(X,Y), -** then sqlite3_value_pointer(V,Y) will return the pointer P. ^Otherwise, -** sqlite3_value_pointer(V,Y) returns a NULL. The sqlite3_bind_pointer() -** routine is part of the [pointer passing interface] added for SQLite 3.20.0. -** -** ^(The sqlite3_value_type(V) interface returns the -** [SQLITE_INTEGER | datatype code] for the initial datatype of the -** [sqlite3_value] object V. The returned value is one of [SQLITE_INTEGER], -** [SQLITE_FLOAT], [SQLITE_TEXT], [SQLITE_BLOB], or [SQLITE_NULL].)^ -** Other interfaces might change the datatype for an sqlite3_value object. -** For example, if the datatype is initially SQLITE_INTEGER and -** sqlite3_value_text(V) is called to extract a text value for that -** integer, then subsequent calls to sqlite3_value_type(V) might return -** SQLITE_TEXT. Whether or not a persistent internal datatype conversion -** occurs is undefined and may change from one release of SQLite to the next. -** -** ^(The sqlite3_value_numeric_type() interface attempts to apply -** numeric affinity to the value. This means that an attempt is -** made to convert the value to an integer or floating point. If -** such a conversion is possible without loss of information (in other -** words, if the value is a string that looks like a number) -** then the conversion is performed. Otherwise no conversion occurs. -** The [SQLITE_INTEGER | datatype] after conversion is returned.)^ -** -** ^Within the [xUpdate] method of a [virtual table], the -** sqlite3_value_nochange(X) interface returns true if and only if -** the column corresponding to X is unchanged by the UPDATE operation -** that the xUpdate method call was invoked to implement and if -** and the prior [xColumn] method call that was invoked to extracted -** the value for that column returned without setting a result (probably -** because it queried [sqlite3_vtab_nochange()] and found that the column -** was unchanging). ^Within an [xUpdate] method, any value for which -** sqlite3_value_nochange(X) is true will in all other respects appear -** to be a NULL value. If sqlite3_value_nochange(X) is invoked anywhere other -** than within an [xUpdate] method call for an UPDATE statement, then -** the return value is arbitrary and meaningless. -** -** Please pay particular attention to the fact that the pointer returned -** from [sqlite3_value_blob()], [sqlite3_value_text()], or -** [sqlite3_value_text16()] can be invalidated by a subsequent call to -** [sqlite3_value_bytes()], [sqlite3_value_bytes16()], [sqlite3_value_text()], -** or [sqlite3_value_text16()]. -** -** These routines must be called from the same thread as -** the SQL function that supplied the [sqlite3_value*] parameters. -** -** As long as the input parameter is correct, these routines can only -** fail if an out-of-memory error occurs during a format conversion. -** Only the following subset of interfaces are subject to out-of-memory -** errors: -** -** <ul> -** <li> sqlite3_value_blob() -** <li> sqlite3_value_text() -** <li> sqlite3_value_text16() -** <li> sqlite3_value_text16le() -** <li> sqlite3_value_text16be() -** <li> sqlite3_value_bytes() -** <li> sqlite3_value_bytes16() -** </ul> -** -** If an out-of-memory error occurs, then the return value from these -** routines is the same as if the column had contained an SQL NULL value. -** Valid SQL NULL returns can be distinguished from out-of-memory errors -** by invoking the [sqlite3_errcode()] immediately after the suspect -** return value is obtained and before any -** other SQLite interface is called on the same [database connection]. -*/ -const(void)* sqlite3_value_blob(sqlite3_value*); -double sqlite3_value_double(sqlite3_value*); -int sqlite3_value_int(sqlite3_value*); -sqlite3_int64 sqlite3_value_int64(sqlite3_value*); -void* sqlite3_value_pointer(sqlite3_value*, const(char)*); -const(ubyte)* sqlite3_value_text(sqlite3_value*); -const(void)* sqlite3_value_text16(sqlite3_value*); -const(void)* sqlite3_value_text16le(sqlite3_value*); -const(void)* sqlite3_value_text16be(sqlite3_value*); -int sqlite3_value_bytes(sqlite3_value*); -int sqlite3_value_bytes16(sqlite3_value*); -int sqlite3_value_type(sqlite3_value*); -int sqlite3_value_numeric_type(sqlite3_value*); -int sqlite3_value_nochange(sqlite3_value*); - -/* -** CAPI3REF: Finding The Subtype Of SQL Values -** METHOD: sqlite3_value -** -** The sqlite3_value_subtype(V) function returns the subtype for -** an [application-defined SQL function] argument V. The subtype -** information can be used to pass a limited amount of context from -** one SQL function to another. Use the [sqlite3_result_subtype()] -** routine to set the subtype for the return value of an SQL function. -*/ -uint sqlite3_value_subtype(sqlite3_value*); - -/* -** CAPI3REF: Copy And Free SQL Values -** METHOD: sqlite3_value -** -** ^The sqlite3_value_dup(V) interface makes a copy of the [sqlite3_value] -** object D and returns a pointer to that copy. ^The [sqlite3_value] returned -** is a [protected sqlite3_value] object even if the input is not. -** ^The sqlite3_value_dup(V) interface returns NULL if V is NULL or if a -** memory allocation fails. -** -** ^The sqlite3_value_free(V) interface frees an [sqlite3_value] object -** previously obtained from [sqlite3_value_dup()]. ^If V is a NULL pointer -** then sqlite3_value_free(V) is a harmless no-op. -*/ -sqlite3_value* sqlite3_value_dup(const(sqlite3_value)*); -void sqlite3_value_free(sqlite3_value*); - -/* -** CAPI3REF: Obtain Aggregate Function Context -** METHOD: sqlite3_context -** -** Implementations of aggregate SQL functions use this -** routine to allocate memory for storing their state. -** -** ^The first time the sqlite3_aggregate_context(C,N) routine is called -** for a particular aggregate function, SQLite -** allocates N of memory, zeroes out that memory, and returns a pointer -** to the new memory. ^On second and subsequent calls to -** sqlite3_aggregate_context() for the same aggregate function instance, -** the same buffer is returned. Sqlite3_aggregate_context() is normally -** called once for each invocation of the xStep callback and then one -** last time when the xFinal callback is invoked. ^(When no rows match -** an aggregate query, the xStep() callback of the aggregate function -** implementation is never called and xFinal() is called exactly once. -** In those cases, sqlite3_aggregate_context() might be called for the -** first time from within xFinal().)^ -** -** ^The sqlite3_aggregate_context(C,N) routine returns a NULL pointer -** when first called if N is less than or equal to zero or if a memory -** allocate error occurs. -** -** ^(The amount of space allocated by sqlite3_aggregate_context(C,N) is -** determined by the N parameter on first successful call. Changing the -** value of N in subsequent call to sqlite3_aggregate_context() within -** the same aggregate function instance will not resize the memory -** allocation.)^ Within the xFinal callback, it is customary to set -** N=0 in calls to sqlite3_aggregate_context(C,N) so that no -** pointless memory allocations occur. -** -** ^SQLite automatically frees the memory allocated by -** sqlite3_aggregate_context() when the aggregate query concludes. -** -** The first parameter must be a copy of the -** [sqlite3_context | SQL function context] that is the first parameter -** to the xStep or xFinal callback routine that implements the aggregate -** function. -** -** This routine must be called from the same thread in which -** the aggregate SQL function is running. -*/ -void* sqlite3_aggregate_context(sqlite3_context*, int nBytes); - -/* -** CAPI3REF: User Data For Functions -** METHOD: sqlite3_context -** -** ^The sqlite3_user_data() interface returns a copy of -** the pointer that was the pUserData parameter (the 5th parameter) -** of the [sqlite3_create_function()] -** and [sqlite3_create_function16()] routines that originally -** registered the application defined function. -** -** This routine must be called from the same thread in which -** the application-defined function is running. -*/ -void* sqlite3_user_data(sqlite3_context*); - -/* -** CAPI3REF: Database Connection For Functions -** METHOD: sqlite3_context -** -** ^The sqlite3_context_db_handle() interface returns a copy of -** the pointer to the [database connection] (the 1st parameter) -** of the [sqlite3_create_function()] -** and [sqlite3_create_function16()] routines that originally -** registered the application defined function. -*/ -sqlite3* sqlite3_context_db_handle(sqlite3_context*); - -/* -** CAPI3REF: Function Auxiliary Data -** METHOD: sqlite3_context -** -** These functions may be used by (non-aggregate) SQL functions to -** associate metadata with argument values. If the same value is passed to -** multiple invocations of the same SQL function during query execution, under -** some circumstances the associated metadata may be preserved. An example -** of where this might be useful is in a regular-expression matching -** function. The compiled version of the regular expression can be stored as -** metadata associated with the pattern string. -** Then as long as the pattern string remains the same, -** the compiled regular expression can be reused on multiple -** invocations of the same function. -** -** ^The sqlite3_get_auxdata(C,N) interface returns a pointer to the metadata -** associated by the sqlite3_set_auxdata(C,N,P,X) function with the Nth argument -** value to the application-defined function. ^N is zero for the left-most -** function argument. ^If there is no metadata -** associated with the function argument, the sqlite3_get_auxdata(C,N) interface -** returns a NULL pointer. -** -** ^The sqlite3_set_auxdata(C,N,P,X) interface saves P as metadata for the N-th -** argument of the application-defined function. ^Subsequent -** calls to sqlite3_get_auxdata(C,N) return P from the most recent -** sqlite3_set_auxdata(C,N,P,X) call if the metadata is still valid or -** NULL if the metadata has been discarded. -** ^After each call to sqlite3_set_auxdata(C,N,P,X) where X is not NULL, -** SQLite will invoke the destructor function X with parameter P exactly -** once, when the metadata is discarded. -** SQLite is free to discard the metadata at any time, including: <ul> -** <li> ^(when the corresponding function parameter changes)^, or -** <li> ^(when [sqlite3_reset()] or [sqlite3_finalize()] is called for the -** SQL statement)^, or -** <li> ^(when sqlite3_set_auxdata() is invoked again on the same -** parameter)^, or -** <li> ^(during the original sqlite3_set_auxdata() call when a memory -** allocation error occurs.)^ </ul> -** -** Note the last bullet in particular. The destructor X in -** sqlite3_set_auxdata(C,N,P,X) might be called immediately, before the -** sqlite3_set_auxdata() interface even returns. Hence sqlite3_set_auxdata() -** should be called near the end of the function implementation and the -** function implementation should not make any use of P after -** sqlite3_set_auxdata() has been called. -** -** ^(In practice, metadata is preserved between function calls for -** function parameters that are compile-time constants, including literal -** values and [parameters] and expressions composed from the same.)^ -** -** The value of the N parameter to these interfaces should be non-negative. -** Future enhancements may make use of negative N values to define new -** kinds of function caching behavior. -** -** These routines must be called from the same thread in which -** the SQL function is running. -*/ -void* sqlite3_get_auxdata(sqlite3_context*, int N); -void sqlite3_set_auxdata(sqlite3_context*, int N, void*, void function(void*)); - -/* -** CAPI3REF: Constants Defining Special Destructor Behavior -** -** These are special values for the destructor that is passed in as the -** final argument to routines like [sqlite3_result_blob()]. ^If the destructor -** argument is SQLITE_STATIC, it means that the content pointer is constant -** and will never change. It does not need to be destroyed. ^The -** SQLITE_TRANSIENT value means that the content will likely change in -** the near future and that SQLite should make its own private copy of -** the content before returning. -** -** The typedef is necessary to work around problems in certain -** C++ compilers. -*/ -alias sqlite3_destructor_type = void function(void*); -enum SQLITE_STATIC = cast(sqlite3_destructor_type) 0; -enum SQLITE_TRANSIENT = cast(sqlite3_destructor_type) -1; - -/* -** CAPI3REF: Setting The Result Of An SQL Function -** METHOD: sqlite3_context -** -** These routines are used by the xFunc or xFinal callbacks that -** implement SQL functions and aggregates. See -** [sqlite3_create_function()] and [sqlite3_create_function16()] -** for additional information. -** -** These functions work very much like the [parameter binding] family of -** functions used to bind values to host parameters in prepared statements. -** Refer to the [SQL parameter] documentation for additional information. -** -** ^The sqlite3_result_blob() interface sets the result from -** an application-defined function to be the BLOB whose content is pointed -** to by the second parameter and which is N bytes long where N is the -** third parameter. -** -** ^The sqlite3_result_zeroblob(C,N) and sqlite3_result_zeroblob64(C,N) -** interfaces set the result of the application-defined function to be -** a BLOB containing all zero bytes and N bytes in size. -** -** ^The sqlite3_result_double() interface sets the result from -** an application-defined function to be a floating point value specified -** by its 2nd argument. -** -** ^The sqlite3_result_error() and sqlite3_result_error16() functions -** cause the implemented SQL function to throw an exception. -** ^SQLite uses the string pointed to by the -** 2nd parameter of sqlite3_result_error() or sqlite3_result_error16() -** as the text of an error message. ^SQLite interprets the error -** message string from sqlite3_result_error() as UTF-8. ^SQLite -** interprets the string from sqlite3_result_error16() as UTF-16 in native -** byte order. ^If the third parameter to sqlite3_result_error() -** or sqlite3_result_error16() is negative then SQLite takes as the error -** message all text up through the first zero character. -** ^If the third parameter to sqlite3_result_error() or -** sqlite3_result_error16() is non-negative then SQLite takes that many -** bytes (not characters) from the 2nd parameter as the error message. -** ^The sqlite3_result_error() and sqlite3_result_error16() -** routines make a private copy of the error message text before -** they return. Hence, the calling function can deallocate or -** modify the text after they return without harm. -** ^The sqlite3_result_error_code() function changes the error code -** returned by SQLite as a result of an error in a function. ^By default, -** the error code is SQLITE_ERROR. ^A subsequent call to sqlite3_result_error() -** or sqlite3_result_error16() resets the error code to SQLITE_ERROR. -** -** ^The sqlite3_result_error_toobig() interface causes SQLite to throw an -** error indicating that a string or BLOB is too long to represent. -** -** ^The sqlite3_result_error_nomem() interface causes SQLite to throw an -** error indicating that a memory allocation failed. -** -** ^The sqlite3_result_int() interface sets the return value -** of the application-defined function to be the 32-bit signed integer -** value given in the 2nd argument. -** ^The sqlite3_result_int64() interface sets the return value -** of the application-defined function to be the 64-bit signed integer -** value given in the 2nd argument. -** -** ^The sqlite3_result_null() interface sets the return value -** of the application-defined function to be NULL. -** -** ^The sqlite3_result_text(), sqlite3_result_text16(), -** sqlite3_result_text16le(), and sqlite3_result_text16be() interfaces -** set the return value of the application-defined function to be -** a text string which is represented as UTF-8, UTF-16 native byte order, -** UTF-16 little endian, or UTF-16 big endian, respectively. -** ^The sqlite3_result_text64() interface sets the return value of an -** application-defined function to be a text string in an encoding -** specified by the fifth (and last) parameter, which must be one -** of [SQLITE_UTF8], [SQLITE_UTF16], [SQLITE_UTF16BE], or [SQLITE_UTF16LE]. -** ^SQLite takes the text result from the application from -** the 2nd parameter of the sqlite3_result_text* interfaces. -** ^If the 3rd parameter to the sqlite3_result_text* interfaces -** is negative, then SQLite takes result text from the 2nd parameter -** through the first zero character. -** ^If the 3rd parameter to the sqlite3_result_text* interfaces -** is non-negative, then as many bytes (not characters) of the text -** pointed to by the 2nd parameter are taken as the application-defined -** function result. If the 3rd parameter is non-negative, then it -** must be the byte offset into the string where the NUL terminator would -** appear if the string where NUL terminated. If any NUL characters occur -** in the string at a byte offset that is less than the value of the 3rd -** parameter, then the resulting string will contain embedded NULs and the -** result of expressions operating on strings with embedded NULs is undefined. -** ^If the 4th parameter to the sqlite3_result_text* interfaces -** or sqlite3_result_blob is a non-NULL pointer, then SQLite calls that -** function as the destructor on the text or BLOB result when it has -** finished using that result. -** ^If the 4th parameter to the sqlite3_result_text* interfaces or to -** sqlite3_result_blob is the special constant SQLITE_STATIC, then SQLite -** assumes that the text or BLOB result is in constant space and does not -** copy the content of the parameter nor call a destructor on the content -** when it has finished using that result. -** ^If the 4th parameter to the sqlite3_result_text* interfaces -** or sqlite3_result_blob is the special constant SQLITE_TRANSIENT -** then SQLite makes a copy of the result into space obtained -** from [sqlite3_malloc()] before it returns. -** -** ^The sqlite3_result_value() interface sets the result of -** the application-defined function to be a copy of the -** [unprotected sqlite3_value] object specified by the 2nd parameter. ^The -** sqlite3_result_value() interface makes a copy of the [sqlite3_value] -** so that the [sqlite3_value] specified in the parameter may change or -** be deallocated after sqlite3_result_value() returns without harm. -** ^A [protected sqlite3_value] object may always be used where an -** [unprotected sqlite3_value] object is required, so either -** kind of [sqlite3_value] object can be used with this interface. -** -** ^The sqlite3_result_pointer(C,P,T,D) interface sets the result to an -** SQL NULL value, just like [sqlite3_result_null(C)], except that it -** also associates the host-language pointer P or type T with that -** NULL value such that the pointer can be retrieved within an -** [application-defined SQL function] using [sqlite3_value_pointer()]. -** ^If the D parameter is not NULL, then it is a pointer to a destructor -** for the P parameter. ^SQLite invokes D with P as its only argument -** when SQLite is finished with P. The T parameter should be a static -** string and preferably a string literal. The sqlite3_result_pointer() -** routine is part of the [pointer passing interface] added for SQLite 3.20.0. -** -** If these routines are called from within the different thread -** than the one containing the application-defined function that received -** the [sqlite3_context] pointer, the results are undefined. -*/ -void sqlite3_result_blob(sqlite3_context*, const(void)*, int, void function(void*)); -void sqlite3_result_blob64( - sqlite3_context*, - const(void)*, - sqlite3_uint64, - void function(void*)); -void sqlite3_result_double(sqlite3_context*, double); -void sqlite3_result_error(sqlite3_context*, const(char)*, int); -void sqlite3_result_error16(sqlite3_context*, const(void)*, int); -void sqlite3_result_error_toobig(sqlite3_context*); -void sqlite3_result_error_nomem(sqlite3_context*); -void sqlite3_result_error_code(sqlite3_context*, int); -void sqlite3_result_int(sqlite3_context*, int); -void sqlite3_result_int64(sqlite3_context*, sqlite3_int64); -void sqlite3_result_null(sqlite3_context*); -void sqlite3_result_text(sqlite3_context*, const(char)*, int, void function(void*)); -void sqlite3_result_text64( - sqlite3_context*, - const(char)*, - sqlite3_uint64, - void function(void*), - ubyte encoding); -void sqlite3_result_text16(sqlite3_context*, const(void)*, int, void function(void*)); -void sqlite3_result_text16le(sqlite3_context*, const(void)*, int, void function(void*)); -void sqlite3_result_text16be(sqlite3_context*, const(void)*, int, void function(void*)); -void sqlite3_result_value(sqlite3_context*, sqlite3_value*); -void sqlite3_result_pointer(sqlite3_context*, void*, const(char)*, void function(void*)); -void sqlite3_result_zeroblob(sqlite3_context*, int n); -int sqlite3_result_zeroblob64(sqlite3_context*, sqlite3_uint64 n); - -/* -** CAPI3REF: Setting The Subtype Of An SQL Function -** METHOD: sqlite3_context -** -** The sqlite3_result_subtype(C,T) function causes the subtype of -** the result from the [application-defined SQL function] with -** [sqlite3_context] C to be the value T. Only the lower 8 bits -** of the subtype T are preserved in current versions of SQLite; -** higher order bits are discarded. -** The number of subtype bytes preserved by SQLite might increase -** in future releases of SQLite. -*/ -void sqlite3_result_subtype(sqlite3_context*, uint); - -/* -** CAPI3REF: Define New Collating Sequences -** METHOD: sqlite3 -** -** ^These functions add, remove, or modify a [collation] associated -** with the [database connection] specified as the first argument. -** -** ^The name of the collation is a UTF-8 string -** for sqlite3_create_collation() and sqlite3_create_collation_v2() -** and a UTF-16 string in native byte order for sqlite3_create_collation16(). -** ^Collation names that compare equal according to [sqlite3_strnicmp()] are -** considered to be the same name. -** -** ^(The third argument (eTextRep) must be one of the constants: -** <ul> -** <li> [SQLITE_UTF8], -** <li> [SQLITE_UTF16LE], -** <li> [SQLITE_UTF16BE], -** <li> [SQLITE_UTF16], or -** <li> [SQLITE_UTF16_ALIGNED]. -** </ul>)^ -** ^The eTextRep argument determines the encoding of strings passed -** to the collating function callback, xCallback. -** ^The [SQLITE_UTF16] and [SQLITE_UTF16_ALIGNED] values for eTextRep -** force strings to be UTF16 with native byte order. -** ^The [SQLITE_UTF16_ALIGNED] value for eTextRep forces strings to begin -** on an even byte address. -** -** ^The fourth argument, pArg, is an application data pointer that is passed -** through as the first argument to the collating function callback. -** -** ^The fifth argument, xCallback, is a pointer to the collating function. -** ^Multiple collating functions can be registered using the same name but -** with different eTextRep parameters and SQLite will use whichever -** function requires the least amount of data transformation. -** ^If the xCallback argument is NULL then the collating function is -** deleted. ^When all collating functions having the same name are deleted, -** that collation is no longer usable. -** -** ^The collating function callback is invoked with a copy of the pArg -** application data pointer and with two strings in the encoding specified -** by the eTextRep argument. The collating function must return an -** integer that is negative, zero, or positive -** if the first string is less than, equal to, or greater than the second, -** respectively. A collating function must always return the same answer -** given the same inputs. If two or more collating functions are registered -** to the same collation name (using different eTextRep values) then all -** must give an equivalent answer when invoked with equivalent strings. -** The collating function must obey the following properties for all -** strings A, B, and C: -** -** <ol> -** <li> If A==B then B==A. -** <li> If A==B and B==C then A==C. -** <li> If A<B THEN B>A. -** <li> If A<B and B<C then A<C. -** </ol> -** -** If a collating function fails any of the above constraints and that -** collating function is registered and used, then the behavior of SQLite -** is undefined. -** -** ^The sqlite3_create_collation_v2() works like sqlite3_create_collation() -** with the addition that the xDestroy callback is invoked on pArg when -** the collating function is deleted. -** ^Collating functions are deleted when they are overridden by later -** calls to the collation creation functions or when the -** [database connection] is closed using [sqlite3_close()]. -** -** ^The xDestroy callback is <u>not</u> called if the -** sqlite3_create_collation_v2() function fails. Applications that invoke -** sqlite3_create_collation_v2() with a non-NULL xDestroy argument should -** check the return code and dispose of the application data pointer -** themselves rather than expecting SQLite to deal with it for them. -** This is different from every other SQLite interface. The inconsistency -** is unfortunate but cannot be changed without breaking backwards -** compatibility. -** -** See also: [sqlite3_collation_needed()] and [sqlite3_collation_needed16()]. -*/ -int sqlite3_create_collation( - sqlite3*, - const(char)* zName, - int eTextRep, - void* pArg, - int function(void*, int, const(void)*, int, const(void)*) xCompare); -int sqlite3_create_collation_v2( - sqlite3*, - const(char)* zName, - int eTextRep, - void* pArg, - int function(void*, int, const(void)*, int, const(void)*) xCompare, - void function(void*) xDestroy); -int sqlite3_create_collation16( - sqlite3*, - const(void)* zName, - int eTextRep, - void* pArg, - int function(void*, int, const(void)*, int, const(void)*) xCompare); - -/* -** CAPI3REF: Collation Needed Callbacks -** METHOD: sqlite3 -** -** ^To avoid having to register all collation sequences before a database -** can be used, a single callback function may be registered with the -** [database connection] to be invoked whenever an undefined collation -** sequence is required. -** -** ^If the function is registered using the sqlite3_collation_needed() API, -** then it is passed the names of undefined collation sequences as strings -** encoded in UTF-8. ^If sqlite3_collation_needed16() is used, -** the names are passed as UTF-16 in machine native byte order. -** ^A call to either function replaces the existing collation-needed callback. -** -** ^(When the callback is invoked, the first argument passed is a copy -** of the second argument to sqlite3_collation_needed() or -** sqlite3_collation_needed16(). The second argument is the database -** connection. The third argument is one of [SQLITE_UTF8], [SQLITE_UTF16BE], -** or [SQLITE_UTF16LE], indicating the most desirable form of the collation -** sequence function required. The fourth parameter is the name of the -** required collation sequence.)^ -** -** The callback function should register the desired collation using -** [sqlite3_create_collation()], [sqlite3_create_collation16()], or -** [sqlite3_create_collation_v2()]. -*/ -int sqlite3_collation_needed( - sqlite3*, - void*, - void function(void*, sqlite3*, int eTextRep, const(char)*)); -int sqlite3_collation_needed16( - sqlite3*, - void*, - void function(void*, sqlite3*, int eTextRep, const(void)*)); - -/* -** Specify the key for an encrypted database. This routine should be -** called right after sqlite3_open(). -** -** The code to implement this API is not available in the public release -** of SQLite. -*/ - -/* Database to be rekeyed */ -/* The key */ - -/* Database to be rekeyed */ -/* Name of the database */ -/* The key */ - -/* -** Change the key on an open database. If the current database is not -** encrypted, this routine will encrypt it. If pNew==0 or nNew==0, the -** database is decrypted. -** -** The code to implement this API is not available in the public release -** of SQLite. -*/ - -/* Database to be rekeyed */ -/* The new key */ - -/* Database to be rekeyed */ -/* Name of the database */ -/* The new key */ - -/* -** Specify the activation key for a SEE database. Unless -** activated, none of the SEE routines will work. -*/ - -/* Activation phrase */ - -/* -** Specify the activation key for a CEROD database. Unless -** activated, none of the CEROD routines will work. -*/ - -/* Activation phrase */ - -/* -** CAPI3REF: Suspend Execution For A Short Time -** -** The sqlite3_sleep() function causes the current thread to suspend execution -** for at least a number of milliseconds specified in its parameter. -** -** If the operating system does not support sleep requests with -** millisecond time resolution, then the time will be rounded up to -** the nearest second. The number of milliseconds of sleep actually -** requested from the operating system is returned. -** -** ^SQLite implements this interface by calling the xSleep() -** method of the default [sqlite3_vfs] object. If the xSleep() method -** of the default VFS is not implemented correctly, or not implemented at -** all, then the behavior of sqlite3_sleep() may deviate from the description -** in the previous paragraphs. -*/ -int sqlite3_sleep(int); - -/* -** CAPI3REF: Name Of The Folder Holding Temporary Files -** -** ^(If this global variable is made to point to a string which is -** the name of a folder (a.k.a. directory), then all temporary files -** created by SQLite when using a built-in [sqlite3_vfs | VFS] -** will be placed in that directory.)^ ^If this variable -** is a NULL pointer, then SQLite performs a search for an appropriate -** temporary file directory. -** -** Applications are strongly discouraged from using this global variable. -** It is required to set a temporary folder on Windows Runtime (WinRT). -** But for all other platforms, it is highly recommended that applications -** neither read nor write this variable. This global variable is a relic -** that exists for backwards compatibility of legacy applications and should -** be avoided in new projects. -** -** It is not safe to read or modify this variable in more than one -** thread at a time. It is not safe to read or modify this variable -** if a [database connection] is being used at the same time in a separate -** thread. -** It is intended that this variable be set once -** as part of process initialization and before any SQLite interface -** routines have been called and that this variable remain unchanged -** thereafter. -** -** ^The [temp_store_directory pragma] may modify this variable and cause -** it to point to memory obtained from [sqlite3_malloc]. ^Furthermore, -** the [temp_store_directory pragma] always assumes that any string -** that this variable points to is held in memory obtained from -** [sqlite3_malloc] and the pragma may attempt to free that memory -** using [sqlite3_free]. -** Hence, if this variable is modified directly, either it should be -** made NULL or made to point to memory obtained from [sqlite3_malloc] -** or else the use of the [temp_store_directory pragma] should be avoided. -** Except when requested by the [temp_store_directory pragma], SQLite -** does not free the memory that sqlite3_temp_directory points to. If -** the application wants that memory to be freed, it must do -** so itself, taking care to only do so after all [database connection] -** objects have been destroyed. -** -** <b>Note to Windows Runtime users:</b> The temporary directory must be set -** prior to calling [sqlite3_open] or [sqlite3_open_v2]. Otherwise, various -** features that require the use of temporary files may fail. Here is an -** example of how to do this using C++ with the Windows Runtime: -** -** <blockquote><pre> -** LPCWSTR zPath = Windows::Storage::ApplicationData::Current-> -** TemporaryFolder->Path->Data(); -** char zPathBuf[MAX_PATH + 1]; -** memset(zPathBuf, 0, sizeof(zPathBuf)); -** WideCharToMultiByte(CP_UTF8, 0, zPath, -1, zPathBuf, sizeof(zPathBuf), -** NULL, NULL); -** sqlite3_temp_directory = sqlite3_mprintf("%s", zPathBuf); -** </pre></blockquote> -*/ -extern __gshared char* sqlite3_temp_directory; - -/* -** CAPI3REF: Name Of The Folder Holding Database Files -** -** ^(If this global variable is made to point to a string which is -** the name of a folder (a.k.a. directory), then all database files -** specified with a relative pathname and created or accessed by -** SQLite when using a built-in windows [sqlite3_vfs | VFS] will be assumed -** to be relative to that directory.)^ ^If this variable is a NULL -** pointer, then SQLite assumes that all database files specified -** with a relative pathname are relative to the current directory -** for the process. Only the windows VFS makes use of this global -** variable; it is ignored by the unix VFS. -** -** Changing the value of this variable while a database connection is -** open can result in a corrupt database. -** -** It is not safe to read or modify this variable in more than one -** thread at a time. It is not safe to read or modify this variable -** if a [database connection] is being used at the same time in a separate -** thread. -** It is intended that this variable be set once -** as part of process initialization and before any SQLite interface -** routines have been called and that this variable remain unchanged -** thereafter. -** -** ^The [data_store_directory pragma] may modify this variable and cause -** it to point to memory obtained from [sqlite3_malloc]. ^Furthermore, -** the [data_store_directory pragma] always assumes that any string -** that this variable points to is held in memory obtained from -** [sqlite3_malloc] and the pragma may attempt to free that memory -** using [sqlite3_free]. -** Hence, if this variable is modified directly, either it should be -** made NULL or made to point to memory obtained from [sqlite3_malloc] -** or else the use of the [data_store_directory pragma] should be avoided. -*/ -extern __gshared char* sqlite3_data_directory; - -/* -** CAPI3REF: Win32 Specific Interface -** -** These interfaces are available only on Windows. The -** [sqlite3_win32_set_directory] interface is used to set the value associated -** with the [sqlite3_temp_directory] or [sqlite3_data_directory] variable, to -** zValue, depending on the value of the type parameter. The zValue parameter -** should be NULL to cause the previous value to be freed via [sqlite3_free]; -** a non-NULL value will be copied into memory obtained from [sqlite3_malloc] -** prior to being used. The [sqlite3_win32_set_directory] interface returns -** [SQLITE_OK] to indicate success, [SQLITE_ERROR] if the type is unsupported, -** or [SQLITE_NOMEM] if memory could not be allocated. The value of the -** [sqlite3_data_directory] variable is intended to act as a replacement for -** the current directory on the sub-platforms of Win32 where that concept is -** not present, e.g. WinRT and UWP. The [sqlite3_win32_set_directory8] and -** [sqlite3_win32_set_directory16] interfaces behave exactly the same as the -** sqlite3_win32_set_directory interface except the string parameter must be -** UTF-8 or UTF-16, respectively. -*/ -/* Identifier for directory being set or reset */ -/* New value for directory being set or reset */ -int sqlite3_win32_set_directory(c_ulong type, void* zValue); -int sqlite3_win32_set_directory8(c_ulong type, const(char)* zValue); -int sqlite3_win32_set_directory16(c_ulong type, const(void)* zValue); - -/* -** CAPI3REF: Win32 Directory Types -** -** These macros are only available on Windows. They define the allowed values -** for the type argument to the [sqlite3_win32_set_directory] interface. -*/ -enum SQLITE_WIN32_DATA_DIRECTORY_TYPE = 1; -enum SQLITE_WIN32_TEMP_DIRECTORY_TYPE = 2; - -/* -** CAPI3REF: Test For Auto-Commit Mode -** KEYWORDS: {autocommit mode} -** METHOD: sqlite3 -** -** ^The sqlite3_get_autocommit() interface returns non-zero or -** zero if the given database connection is or is not in autocommit mode, -** respectively. ^Autocommit mode is on by default. -** ^Autocommit mode is disabled by a [BEGIN] statement. -** ^Autocommit mode is re-enabled by a [COMMIT] or [ROLLBACK]. -** -** If certain kinds of errors occur on a statement within a multi-statement -** transaction (errors including [SQLITE_FULL], [SQLITE_IOERR], -** [SQLITE_NOMEM], [SQLITE_BUSY], and [SQLITE_INTERRUPT]) then the -** transaction might be rolled back automatically. The only way to -** find out whether SQLite automatically rolled back the transaction after -** an error is to use this function. -** -** If another thread changes the autocommit status of the database -** connection while this routine is running, then the return value -** is undefined. -*/ -int sqlite3_get_autocommit(sqlite3*); - -/* -** CAPI3REF: Find The Database Handle Of A Prepared Statement -** METHOD: sqlite3_stmt -** -** ^The sqlite3_db_handle interface returns the [database connection] handle -** to which a [prepared statement] belongs. ^The [database connection] -** returned by sqlite3_db_handle is the same [database connection] -** that was the first argument -** to the [sqlite3_prepare_v2()] call (or its variants) that was used to -** create the statement in the first place. -*/ -sqlite3* sqlite3_db_handle(sqlite3_stmt*); - -/* -** CAPI3REF: Return The Filename For A Database Connection -** METHOD: sqlite3 -** -** ^The sqlite3_db_filename(D,N) interface returns a pointer to a filename -** associated with database N of connection D. ^The main database file -** has the name "main". If there is no attached database N on the database -** connection D, or if database N is a temporary or in-memory database, then -** a NULL pointer is returned. -** -** ^The filename returned by this function is the output of the -** xFullPathname method of the [VFS]. ^In other words, the filename -** will be an absolute pathname, even if the filename used -** to open the database originally was a URI or relative pathname. -*/ -const(char)* sqlite3_db_filename(sqlite3* db, const(char)* zDbName); - -/* -** CAPI3REF: Determine if a database is read-only -** METHOD: sqlite3 -** -** ^The sqlite3_db_readonly(D,N) interface returns 1 if the database N -** of connection D is read-only, 0 if it is read/write, or -1 if N is not -** the name of a database on connection D. -*/ -int sqlite3_db_readonly(sqlite3* db, const(char)* zDbName); - -/* -** CAPI3REF: Find the next prepared statement -** METHOD: sqlite3 -** -** ^This interface returns a pointer to the next [prepared statement] after -** pStmt associated with the [database connection] pDb. ^If pStmt is NULL -** then this interface returns a pointer to the first prepared statement -** associated with the database connection pDb. ^If no prepared statement -** satisfies the conditions of this routine, it returns NULL. -** -** The [database connection] pointer D in a call to -** [sqlite3_next_stmt(D,S)] must refer to an open database -** connection and in particular must not be a NULL pointer. -*/ -sqlite3_stmt* sqlite3_next_stmt(sqlite3* pDb, sqlite3_stmt* pStmt); - -/* -** CAPI3REF: Commit And Rollback Notification Callbacks -** METHOD: sqlite3 -** -** ^The sqlite3_commit_hook() interface registers a callback -** function to be invoked whenever a transaction is [COMMIT | committed]. -** ^Any callback set by a previous call to sqlite3_commit_hook() -** for the same database connection is overridden. -** ^The sqlite3_rollback_hook() interface registers a callback -** function to be invoked whenever a transaction is [ROLLBACK | rolled back]. -** ^Any callback set by a previous call to sqlite3_rollback_hook() -** for the same database connection is overridden. -** ^The pArg argument is passed through to the callback. -** ^If the callback on a commit hook function returns non-zero, -** then the commit is converted into a rollback. -** -** ^The sqlite3_commit_hook(D,C,P) and sqlite3_rollback_hook(D,C,P) functions -** return the P argument from the previous call of the same function -** on the same [database connection] D, or NULL for -** the first call for each function on D. -** -** The commit and rollback hook callbacks are not reentrant. -** The callback implementation must not do anything that will modify -** the database connection that invoked the callback. Any actions -** to modify the database connection must be deferred until after the -** completion of the [sqlite3_step()] call that triggered the commit -** or rollback hook in the first place. -** Note that running any other SQL statements, including SELECT statements, -** or merely calling [sqlite3_prepare_v2()] and [sqlite3_step()] will modify -** the database connections for the meaning of "modify" in this paragraph. -** -** ^Registering a NULL function disables the callback. -** -** ^When the commit hook callback routine returns zero, the [COMMIT] -** operation is allowed to continue normally. ^If the commit hook -** returns non-zero, then the [COMMIT] is converted into a [ROLLBACK]. -** ^The rollback hook is invoked on a rollback that results from a commit -** hook returning non-zero, just as it would be with any other rollback. -** -** ^For the purposes of this API, a transaction is said to have been -** rolled back if an explicit "ROLLBACK" statement is executed, or -** an error or constraint causes an implicit rollback to occur. -** ^The rollback callback is not invoked if a transaction is -** automatically rolled back because the database connection is closed. -** -** See also the [sqlite3_update_hook()] interface. -*/ -void* sqlite3_commit_hook(sqlite3*, int function(void*), void*); -void* sqlite3_rollback_hook(sqlite3*, void function(void*), void*); - -/* -** CAPI3REF: Data Change Notification Callbacks -** METHOD: sqlite3 -** -** ^The sqlite3_update_hook() interface registers a callback function -** with the [database connection] identified by the first argument -** to be invoked whenever a row is updated, inserted or deleted in -** a [rowid table]. -** ^Any callback set by a previous call to this function -** for the same database connection is overridden. -** -** ^The second argument is a pointer to the function to invoke when a -** row is updated, inserted or deleted in a rowid table. -** ^The first argument to the callback is a copy of the third argument -** to sqlite3_update_hook(). -** ^The second callback argument is one of [SQLITE_INSERT], [SQLITE_DELETE], -** or [SQLITE_UPDATE], depending on the operation that caused the callback -** to be invoked. -** ^The third and fourth arguments to the callback contain pointers to the -** database and table name containing the affected row. -** ^The final callback parameter is the [rowid] of the row. -** ^In the case of an update, this is the [rowid] after the update takes place. -** -** ^(The update hook is not invoked when internal system tables are -** modified (i.e. sqlite_master and sqlite_sequence).)^ -** ^The update hook is not invoked when [WITHOUT ROWID] tables are modified. -** -** ^In the current implementation, the update hook -** is not invoked when conflicting rows are deleted because of an -** [ON CONFLICT | ON CONFLICT REPLACE] clause. ^Nor is the update hook -** invoked when rows are deleted using the [truncate optimization]. -** The exceptions defined in this paragraph might change in a future -** release of SQLite. -** -** The update hook implementation must not do anything that will modify -** the database connection that invoked the update hook. Any actions -** to modify the database connection must be deferred until after the -** completion of the [sqlite3_step()] call that triggered the update hook. -** Note that [sqlite3_prepare_v2()] and [sqlite3_step()] both modify their -** database connections for the meaning of "modify" in this paragraph. -** -** ^The sqlite3_update_hook(D,C,P) function -** returns the P argument from the previous call -** on the same [database connection] D, or NULL for -** the first call on D. -** -** See also the [sqlite3_commit_hook()], [sqlite3_rollback_hook()], -** and [sqlite3_preupdate_hook()] interfaces. -*/ -void* sqlite3_update_hook( - sqlite3*, - void function(void*, int, const(char)*, const(char)*, sqlite3_int64), - void*); - -/* -** CAPI3REF: Enable Or Disable Shared Pager Cache -** -** ^(This routine enables or disables the sharing of the database cache -** and schema data structures between [database connection | connections] -** to the same database. Sharing is enabled if the argument is true -** and disabled if the argument is false.)^ -** -** ^Cache sharing is enabled and disabled for an entire process. -** This is a change as of SQLite [version 3.5.0] ([dateof:3.5.0]). -** In prior versions of SQLite, -** sharing was enabled or disabled for each thread separately. -** -** ^(The cache sharing mode set by this interface effects all subsequent -** calls to [sqlite3_open()], [sqlite3_open_v2()], and [sqlite3_open16()]. -** Existing database connections continue use the sharing mode -** that was in effect at the time they were opened.)^ -** -** ^(This routine returns [SQLITE_OK] if shared cache was enabled or disabled -** successfully. An [error code] is returned otherwise.)^ -** -** ^Shared cache is disabled by default. But this might change in -** future releases of SQLite. Applications that care about shared -** cache setting should set it explicitly. -** -** Note: This method is disabled on MacOS X 10.7 and iOS version 5.0 -** and will always return SQLITE_MISUSE. On those systems, -** shared cache mode should be enabled per-database connection via -** [sqlite3_open_v2()] with [SQLITE_OPEN_SHAREDCACHE]. -** -** This interface is threadsafe on processors where writing a -** 32-bit integer is atomic. -** -** See Also: [SQLite Shared-Cache Mode] -*/ -int sqlite3_enable_shared_cache(int); - -/* -** CAPI3REF: Attempt To Free Heap Memory -** -** ^The sqlite3_release_memory() interface attempts to free N bytes -** of heap memory by deallocating non-essential memory allocations -** held by the database library. Memory used to cache database -** pages to improve performance is an example of non-essential memory. -** ^sqlite3_release_memory() returns the number of bytes actually freed, -** which might be more or less than the amount requested. -** ^The sqlite3_release_memory() routine is a no-op returning zero -** if SQLite is not compiled with [SQLITE_ENABLE_MEMORY_MANAGEMENT]. -** -** See also: [sqlite3_db_release_memory()] -*/ -int sqlite3_release_memory(int); - -/* -** CAPI3REF: Free Memory Used By A Database Connection -** METHOD: sqlite3 -** -** ^The sqlite3_db_release_memory(D) interface attempts to free as much heap -** memory as possible from database connection D. Unlike the -** [sqlite3_release_memory()] interface, this interface is in effect even -** when the [SQLITE_ENABLE_MEMORY_MANAGEMENT] compile-time option is -** omitted. -** -** See also: [sqlite3_release_memory()] -*/ -int sqlite3_db_release_memory(sqlite3*); - -/* -** CAPI3REF: Impose A Limit On Heap Size -** -** ^The sqlite3_soft_heap_limit64() interface sets and/or queries the -** soft limit on the amount of heap memory that may be allocated by SQLite. -** ^SQLite strives to keep heap memory utilization below the soft heap -** limit by reducing the number of pages held in the page cache -** as heap memory usages approaches the limit. -** ^The soft heap limit is "soft" because even though SQLite strives to stay -** below the limit, it will exceed the limit rather than generate -** an [SQLITE_NOMEM] error. In other words, the soft heap limit -** is advisory only. -** -** ^The return value from sqlite3_soft_heap_limit64() is the size of -** the soft heap limit prior to the call, or negative in the case of an -** error. ^If the argument N is negative -** then no change is made to the soft heap limit. Hence, the current -** size of the soft heap limit can be determined by invoking -** sqlite3_soft_heap_limit64() with a negative argument. -** -** ^If the argument N is zero then the soft heap limit is disabled. -** -** ^(The soft heap limit is not enforced in the current implementation -** if one or more of following conditions are true: -** -** <ul> -** <li> The soft heap limit is set to zero. -** <li> Memory accounting is disabled using a combination of the -** [sqlite3_config]([SQLITE_CONFIG_MEMSTATUS],...) start-time option and -** the [SQLITE_DEFAULT_MEMSTATUS] compile-time option. -** <li> An alternative page cache implementation is specified using -** [sqlite3_config]([SQLITE_CONFIG_PCACHE2],...). -** <li> The page cache allocates from its own memory pool supplied -** by [sqlite3_config]([SQLITE_CONFIG_PAGECACHE],...) rather than -** from the heap. -** </ul>)^ -** -** Beginning with SQLite [version 3.7.3] ([dateof:3.7.3]), -** the soft heap limit is enforced -** regardless of whether or not the [SQLITE_ENABLE_MEMORY_MANAGEMENT] -** compile-time option is invoked. With [SQLITE_ENABLE_MEMORY_MANAGEMENT], -** the soft heap limit is enforced on every memory allocation. Without -** [SQLITE_ENABLE_MEMORY_MANAGEMENT], the soft heap limit is only enforced -** when memory is allocated by the page cache. Testing suggests that because -** the page cache is the predominate memory user in SQLite, most -** applications will achieve adequate soft heap limit enforcement without -** the use of [SQLITE_ENABLE_MEMORY_MANAGEMENT]. -** -** The circumstances under which SQLite will enforce the soft heap limit may -** changes in future releases of SQLite. -*/ -sqlite3_int64 sqlite3_soft_heap_limit64(sqlite3_int64 N); - -/* -** CAPI3REF: Deprecated Soft Heap Limit Interface -** DEPRECATED -** -** This is a deprecated version of the [sqlite3_soft_heap_limit64()] -** interface. This routine is provided for historical compatibility -** only. All new applications should use the -** [sqlite3_soft_heap_limit64()] interface rather than this one. -*/ -void sqlite3_soft_heap_limit(int N); - -/* -** CAPI3REF: Extract Metadata About A Column Of A Table -** METHOD: sqlite3 -** -** ^(The sqlite3_table_column_metadata(X,D,T,C,....) routine returns -** information about column C of table T in database D -** on [database connection] X.)^ ^The sqlite3_table_column_metadata() -** interface returns SQLITE_OK and fills in the non-NULL pointers in -** the final five arguments with appropriate values if the specified -** column exists. ^The sqlite3_table_column_metadata() interface returns -** SQLITE_ERROR and if the specified column does not exist. -** ^If the column-name parameter to sqlite3_table_column_metadata() is a -** NULL pointer, then this routine simply checks for the existence of the -** table and returns SQLITE_OK if the table exists and SQLITE_ERROR if it -** does not. If the table name parameter T in a call to -** sqlite3_table_column_metadata(X,D,T,C,...) is NULL then the result is -** undefined behavior. -** -** ^The column is identified by the second, third and fourth parameters to -** this function. ^(The second parameter is either the name of the database -** (i.e. "main", "temp", or an attached database) containing the specified -** table or NULL.)^ ^If it is NULL, then all attached databases are searched -** for the table using the same algorithm used by the database engine to -** resolve unqualified table references. -** -** ^The third and fourth parameters to this function are the table and column -** name of the desired column, respectively. -** -** ^Metadata is returned by writing to the memory locations passed as the 5th -** and subsequent parameters to this function. ^Any of these arguments may be -** NULL, in which case the corresponding element of metadata is omitted. -** -** ^(<blockquote> -** <table border="1"> -** <tr><th> Parameter <th> Output<br>Type <th> Description -** -** <tr><td> 5th <td> const char* <td> Data type -** <tr><td> 6th <td> const char* <td> Name of default collation sequence -** <tr><td> 7th <td> int <td> True if column has a NOT NULL constraint -** <tr><td> 8th <td> int <td> True if column is part of the PRIMARY KEY -** <tr><td> 9th <td> int <td> True if column is [AUTOINCREMENT] -** </table> -** </blockquote>)^ -** -** ^The memory pointed to by the character pointers returned for the -** declaration type and collation sequence is valid until the next -** call to any SQLite API function. -** -** ^If the specified table is actually a view, an [error code] is returned. -** -** ^If the specified column is "rowid", "oid" or "_rowid_" and the table -** is not a [WITHOUT ROWID] table and an -** [INTEGER PRIMARY KEY] column has been explicitly declared, then the output -** parameters are set for the explicitly declared column. ^(If there is no -** [INTEGER PRIMARY KEY] column, then the outputs -** for the [rowid] are set as follows: -** -** <pre> -** data type: "INTEGER" -** collation sequence: "BINARY" -** not null: 0 -** primary key: 1 -** auto increment: 0 -** </pre>)^ -** -** ^This function causes all database schemas to be read from disk and -** parsed, if that has not already been done, and returns an error if -** any errors are encountered while loading the schema. -*/ -/* Connection handle */ -/* Database name or NULL */ -/* Table name */ -/* Column name */ -/* OUTPUT: Declared data type */ -/* OUTPUT: Collation sequence name */ -/* OUTPUT: True if NOT NULL constraint exists */ -/* OUTPUT: True if column part of PK */ -/* OUTPUT: True if column is auto-increment */ -int sqlite3_table_column_metadata( - sqlite3* db, - const(char)* zDbName, - const(char)* zTableName, - const(char)* zColumnName, - const(char*)* pzDataType, - const(char*)* pzCollSeq, - int* pNotNull, - int* pPrimaryKey, - int* pAutoinc); - -/* -** CAPI3REF: Load An Extension -** METHOD: sqlite3 -** -** ^This interface loads an SQLite extension library from the named file. -** -** ^The sqlite3_load_extension() interface attempts to load an -** [SQLite extension] library contained in the file zFile. If -** the file cannot be loaded directly, attempts are made to load -** with various operating-system specific extensions added. -** So for example, if "samplelib" cannot be loaded, then names like -** "samplelib.so" or "samplelib.dylib" or "samplelib.dll" might -** be tried also. -** -** ^The entry point is zProc. -** ^(zProc may be 0, in which case SQLite will try to come up with an -** entry point name on its own. It first tries "sqlite3_extension_init". -** If that does not work, it constructs a name "sqlite3_X_init" where the -** X is consists of the lower-case equivalent of all ASCII alphabetic -** characters in the filename from the last "/" to the first following -** "." and omitting any initial "lib".)^ -** ^The sqlite3_load_extension() interface returns -** [SQLITE_OK] on success and [SQLITE_ERROR] if something goes wrong. -** ^If an error occurs and pzErrMsg is not 0, then the -** [sqlite3_load_extension()] interface shall attempt to -** fill *pzErrMsg with error message text stored in memory -** obtained from [sqlite3_malloc()]. The calling function -** should free this memory by calling [sqlite3_free()]. -** -** ^Extension loading must be enabled using -** [sqlite3_enable_load_extension()] or -** [sqlite3_db_config](db,[SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION],1,NULL) -** prior to calling this API, -** otherwise an error will be returned. -** -** <b>Security warning:</b> It is recommended that the -** [SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION] method be used to enable only this -** interface. The use of the [sqlite3_enable_load_extension()] interface -** should be avoided. This will keep the SQL function [load_extension()] -** disabled and prevent SQL injections from giving attackers -** access to extension loading capabilities. -** -** See also the [load_extension() SQL function]. -*/ -/* Load the extension into this database connection */ -/* Name of the shared library containing extension */ -/* Entry point. Derived from zFile if 0 */ -/* Put error message here if not 0 */ -int sqlite3_load_extension( - sqlite3* db, - const(char)* zFile, - const(char)* zProc, - char** pzErrMsg); - -/* -** CAPI3REF: Enable Or Disable Extension Loading -** METHOD: sqlite3 -** -** ^So as not to open security holes in older applications that are -** unprepared to deal with [extension loading], and as a means of disabling -** [extension loading] while evaluating user-entered SQL, the following API -** is provided to turn the [sqlite3_load_extension()] mechanism on and off. -** -** ^Extension loading is off by default. -** ^Call the sqlite3_enable_load_extension() routine with onoff==1 -** to turn extension loading on and call it with onoff==0 to turn -** it back off again. -** -** ^This interface enables or disables both the C-API -** [sqlite3_load_extension()] and the SQL function [load_extension()]. -** ^(Use [sqlite3_db_config](db,[SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION],..) -** to enable or disable only the C-API.)^ -** -** <b>Security warning:</b> It is recommended that extension loading -** be disabled using the [SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION] method -** rather than this interface, so the [load_extension()] SQL function -** remains disabled. This will prevent SQL injections from giving attackers -** access to extension loading capabilities. -*/ -int sqlite3_enable_load_extension(sqlite3* db, int onoff); - -/* -** CAPI3REF: Automatically Load Statically Linked Extensions -** -** ^This interface causes the xEntryPoint() function to be invoked for -** each new [database connection] that is created. The idea here is that -** xEntryPoint() is the entry point for a statically linked [SQLite extension] -** that is to be automatically loaded into all new database connections. -** -** ^(Even though the function prototype shows that xEntryPoint() takes -** no arguments and returns void, SQLite invokes xEntryPoint() with three -** arguments and expects an integer result as if the signature of the -** entry point where as follows: -** -** <blockquote><pre> -** int xEntryPoint( -** sqlite3 *db, -** const char **pzErrMsg, -** const struct sqlite3_api_routines *pThunk -** ); -** </pre></blockquote>)^ -** -** If the xEntryPoint routine encounters an error, it should make *pzErrMsg -** point to an appropriate error message (obtained from [sqlite3_mprintf()]) -** and return an appropriate [error code]. ^SQLite ensures that *pzErrMsg -** is NULL before calling the xEntryPoint(). ^SQLite will invoke -** [sqlite3_free()] on *pzErrMsg after xEntryPoint() returns. ^If any -** xEntryPoint() returns an error, the [sqlite3_open()], [sqlite3_open16()], -** or [sqlite3_open_v2()] call that provoked the xEntryPoint() will fail. -** -** ^Calling sqlite3_auto_extension(X) with an entry point X that is already -** on the list of automatic extensions is a harmless no-op. ^No entry point -** will be called more than once for each database connection that is opened. -** -** See also: [sqlite3_reset_auto_extension()] -** and [sqlite3_cancel_auto_extension()] -*/ -int sqlite3_auto_extension(void function() xEntryPoint); - -/* -** CAPI3REF: Cancel Automatic Extension Loading -** -** ^The [sqlite3_cancel_auto_extension(X)] interface unregisters the -** initialization routine X that was registered using a prior call to -** [sqlite3_auto_extension(X)]. ^The [sqlite3_cancel_auto_extension(X)] -** routine returns 1 if initialization routine X was successfully -** unregistered and it returns 0 if X was not on the list of initialization -** routines. -*/ -int sqlite3_cancel_auto_extension(void function() xEntryPoint); - -/* -** CAPI3REF: Reset Automatic Extension Loading -** -** ^This interface disables all automatic extensions previously -** registered using [sqlite3_auto_extension()]. -*/ -void sqlite3_reset_auto_extension(); - -/* -** The interface to the virtual-table mechanism is currently considered -** to be experimental. The interface might change in incompatible ways. -** If this is a problem for you, do not use the interface at this time. -** -** When the virtual-table mechanism stabilizes, we will declare the -** interface fixed, support it indefinitely, and remove this comment. -*/ - -/* -** Structures used by the virtual table interface -*/ - -/* -** CAPI3REF: Virtual Table Object -** KEYWORDS: sqlite3_module {virtual table module} -** -** This structure, sometimes called a "virtual table module", -** defines the implementation of a [virtual tables]. -** This structure consists mostly of methods for the module. -** -** ^A virtual table module is created by filling in a persistent -** instance of this structure and passing a pointer to that instance -** to [sqlite3_create_module()] or [sqlite3_create_module_v2()]. -** ^The registration remains valid until it is replaced by a different -** module or until the [database connection] closes. The content -** of this structure must not change while it is registered with -** any database connection. -*/ -struct sqlite3_module -{ - int iVersion; - int function(sqlite3*, void* pAux, int argc, const(char*)* argv, sqlite3_vtab** ppVTab, char**) xCreate; - int function(sqlite3*, void* pAux, int argc, const(char*)* argv, sqlite3_vtab** ppVTab, char**) xConnect; - int function(sqlite3_vtab* pVTab, sqlite3_index_info*) xBestIndex; - int function(sqlite3_vtab* pVTab) xDisconnect; - int function(sqlite3_vtab* pVTab) xDestroy; - int function(sqlite3_vtab* pVTab, sqlite3_vtab_cursor** ppCursor) xOpen; - int function(sqlite3_vtab_cursor*) xClose; - int function(sqlite3_vtab_cursor*, int idxNum, const(char)* idxStr, int argc, sqlite3_value** argv) xFilter; - int function(sqlite3_vtab_cursor*) xNext; - int function(sqlite3_vtab_cursor*) xEof; - int function(sqlite3_vtab_cursor*, sqlite3_context*, int) xColumn; - int function(sqlite3_vtab_cursor*, sqlite3_int64* pRowid) xRowid; - int function(sqlite3_vtab*, int, sqlite3_value**, sqlite3_int64*) xUpdate; - int function(sqlite3_vtab* pVTab) xBegin; - int function(sqlite3_vtab* pVTab) xSync; - int function(sqlite3_vtab* pVTab) xCommit; - int function(sqlite3_vtab* pVTab) xRollback; - int function(sqlite3_vtab* pVtab, int nArg, const(char)* zName, void function(sqlite3_context*, int, sqlite3_value**)* pxFunc, void** ppArg) xFindFunction; - int function(sqlite3_vtab* pVtab, const(char)* zNew) xRename; - /* The methods above are in version 1 of the sqlite_module object. Those - ** below are for version 2 and greater. */ - int function(sqlite3_vtab* pVTab, int) xSavepoint; - int function(sqlite3_vtab* pVTab, int) xRelease; - int function(sqlite3_vtab* pVTab, int) xRollbackTo; -} - -/* -** CAPI3REF: Virtual Table Indexing Information -** KEYWORDS: sqlite3_index_info -** -** The sqlite3_index_info structure and its substructures is used as part -** of the [virtual table] interface to -** pass information into and receive the reply from the [xBestIndex] -** method of a [virtual table module]. The fields under **Inputs** are the -** inputs to xBestIndex and are read-only. xBestIndex inserts its -** results into the **Outputs** fields. -** -** ^(The aConstraint[] array records WHERE clause constraints of the form: -** -** <blockquote>column OP expr</blockquote> -** -** where OP is =, <, <=, >, or >=.)^ ^(The particular operator is -** stored in aConstraint[].op using one of the -** [SQLITE_INDEX_CONSTRAINT_EQ | SQLITE_INDEX_CONSTRAINT_ values].)^ -** ^(The index of the column is stored in -** aConstraint[].iColumn.)^ ^(aConstraint[].usable is TRUE if the -** expr on the right-hand side can be evaluated (and thus the constraint -** is usable) and false if it cannot.)^ -** -** ^The optimizer automatically inverts terms of the form "expr OP column" -** and makes other simplifications to the WHERE clause in an attempt to -** get as many WHERE clause terms into the form shown above as possible. -** ^The aConstraint[] array only reports WHERE clause terms that are -** relevant to the particular virtual table being queried. -** -** ^Information about the ORDER BY clause is stored in aOrderBy[]. -** ^Each term of aOrderBy records a column of the ORDER BY clause. -** -** The colUsed field indicates which columns of the virtual table may be -** required by the current scan. Virtual table columns are numbered from -** zero in the order in which they appear within the CREATE TABLE statement -** passed to sqlite3_declare_vtab(). For the first 63 columns (columns 0-62), -** the corresponding bit is set within the colUsed mask if the column may be -** required by SQLite. If the table has at least 64 columns and any column -** to the right of the first 63 is required, then bit 63 of colUsed is also -** set. In other words, column iCol may be required if the expression -** (colUsed & ((sqlite3_uint64)1 << (iCol>=63 ? 63 : iCol))) evaluates to -** non-zero. -** -** The [xBestIndex] method must fill aConstraintUsage[] with information -** about what parameters to pass to xFilter. ^If argvIndex>0 then -** the right-hand side of the corresponding aConstraint[] is evaluated -** and becomes the argvIndex-th entry in argv. ^(If aConstraintUsage[].omit -** is true, then the constraint is assumed to be fully handled by the -** virtual table and is not checked again by SQLite.)^ -** -** ^The idxNum and idxPtr values are recorded and passed into the -** [xFilter] method. -** ^[sqlite3_free()] is used to free idxPtr if and only if -** needToFreeIdxPtr is true. -** -** ^The orderByConsumed means that output from [xFilter]/[xNext] will occur in -** the correct order to satisfy the ORDER BY clause so that no separate -** sorting step is required. -** -** ^The estimatedCost value is an estimate of the cost of a particular -** strategy. A cost of N indicates that the cost of the strategy is similar -** to a linear scan of an SQLite table with N rows. A cost of log(N) -** indicates that the expense of the operation is similar to that of a -** binary search on a unique indexed field of an SQLite table with N rows. -** -** ^The estimatedRows value is an estimate of the number of rows that -** will be returned by the strategy. -** -** The xBestIndex method may optionally populate the idxFlags field with a -** mask of SQLITE_INDEX_SCAN_* flags. Currently there is only one such flag - -** SQLITE_INDEX_SCAN_UNIQUE. If the xBestIndex method sets this flag, SQLite -** assumes that the strategy may visit at most one row. -** -** Additionally, if xBestIndex sets the SQLITE_INDEX_SCAN_UNIQUE flag, then -** SQLite also assumes that if a call to the xUpdate() method is made as -** part of the same statement to delete or update a virtual table row and the -** implementation returns SQLITE_CONSTRAINT, then there is no need to rollback -** any database changes. In other words, if the xUpdate() returns -** SQLITE_CONSTRAINT, the database contents must be exactly as they were -** before xUpdate was called. By contrast, if SQLITE_INDEX_SCAN_UNIQUE is not -** set and xUpdate returns SQLITE_CONSTRAINT, any database changes made by -** the xUpdate method are automatically rolled back by SQLite. -** -** IMPORTANT: The estimatedRows field was added to the sqlite3_index_info -** structure for SQLite [version 3.8.2] ([dateof:3.8.2]). -** If a virtual table extension is -** used with an SQLite version earlier than 3.8.2, the results of attempting -** to read or write the estimatedRows field are undefined (but are likely -** to included crashing the application). The estimatedRows field should -** therefore only be used if [sqlite3_libversion_number()] returns a -** value greater than or equal to 3008002. Similarly, the idxFlags field -** was added for [version 3.9.0] ([dateof:3.9.0]). -** It may therefore only be used if -** sqlite3_libversion_number() returns a value greater than or equal to -** 3009000. -*/ -struct sqlite3_index_info -{ - /* Inputs */ - int nConstraint; /* Number of entries in aConstraint */ - - /* Column constrained. -1 for ROWID */ - /* Constraint operator */ - /* True if this constraint is usable */ - /* Used internally - xBestIndex should ignore */ - struct sqlite3_index_constraint - { - int iColumn; - ubyte op; - ubyte usable; - int iTermOffset; - } - - sqlite3_index_constraint* aConstraint; /* Table of WHERE clause constraints */ - int nOrderBy; /* Number of terms in the ORDER BY clause */ - - /* Column number */ - /* True for DESC. False for ASC. */ - struct sqlite3_index_orderby - { - int iColumn; - ubyte desc; - } - - sqlite3_index_orderby* aOrderBy; /* The ORDER BY clause */ - /* Outputs */ - - /* if >0, constraint is part of argv to xFilter */ - /* Do not code a test for this constraint */ - struct sqlite3_index_constraint_usage - { - int argvIndex; - ubyte omit; - } - - sqlite3_index_constraint_usage* aConstraintUsage; - int idxNum; /* Number used to identify the index */ - char* idxStr; /* String, possibly obtained from sqlite3_malloc */ - int needToFreeIdxStr; /* Free idxStr using sqlite3_free() if true */ - int orderByConsumed; /* True if output is already ordered */ - double estimatedCost; /* Estimated cost of using this index */ - /* Fields below are only available in SQLite 3.8.2 and later */ - sqlite3_int64 estimatedRows; /* Estimated number of rows returned */ - /* Fields below are only available in SQLite 3.9.0 and later */ - int idxFlags; /* Mask of SQLITE_INDEX_SCAN_* flags */ - /* Fields below are only available in SQLite 3.10.0 and later */ - sqlite3_uint64 colUsed; /* Input: Mask of columns used by statement */ -} - -/* -** CAPI3REF: Virtual Table Scan Flags -** -** Virtual table implementations are allowed to set the -** [sqlite3_index_info].idxFlags field to some combination of -** these bits. -*/ -enum SQLITE_INDEX_SCAN_UNIQUE = 1; /* Scan visits at most 1 row */ - -/* -** CAPI3REF: Virtual Table Constraint Operator Codes -** -** These macros defined the allowed values for the -** [sqlite3_index_info].aConstraint[].op field. Each value represents -** an operator that is part of a constraint term in the wHERE clause of -** a query that uses a [virtual table]. -*/ -enum SQLITE_INDEX_CONSTRAINT_EQ = 2; -enum SQLITE_INDEX_CONSTRAINT_GT = 4; -enum SQLITE_INDEX_CONSTRAINT_LE = 8; -enum SQLITE_INDEX_CONSTRAINT_LT = 16; -enum SQLITE_INDEX_CONSTRAINT_GE = 32; -enum SQLITE_INDEX_CONSTRAINT_MATCH = 64; -enum SQLITE_INDEX_CONSTRAINT_LIKE = 65; -enum SQLITE_INDEX_CONSTRAINT_GLOB = 66; -enum SQLITE_INDEX_CONSTRAINT_REGEXP = 67; -enum SQLITE_INDEX_CONSTRAINT_NE = 68; -enum SQLITE_INDEX_CONSTRAINT_ISNOT = 69; -enum SQLITE_INDEX_CONSTRAINT_ISNOTNULL = 70; -enum SQLITE_INDEX_CONSTRAINT_ISNULL = 71; -enum SQLITE_INDEX_CONSTRAINT_IS = 72; -enum SQLITE_INDEX_CONSTRAINT_FUNCTION = 150; - -/* -** CAPI3REF: Register A Virtual Table Implementation -** METHOD: sqlite3 -** -** ^These routines are used to register a new [virtual table module] name. -** ^Module names must be registered before -** creating a new [virtual table] using the module and before using a -** preexisting [virtual table] for the module. -** -** ^The module name is registered on the [database connection] specified -** by the first parameter. ^The name of the module is given by the -** second parameter. ^The third parameter is a pointer to -** the implementation of the [virtual table module]. ^The fourth -** parameter is an arbitrary client data pointer that is passed through -** into the [xCreate] and [xConnect] methods of the virtual table module -** when a new virtual table is be being created or reinitialized. -** -** ^The sqlite3_create_module_v2() interface has a fifth parameter which -** is a pointer to a destructor for the pClientData. ^SQLite will -** invoke the destructor function (if it is not NULL) when SQLite -** no longer needs the pClientData pointer. ^The destructor will also -** be invoked if the call to sqlite3_create_module_v2() fails. -** ^The sqlite3_create_module() -** interface is equivalent to sqlite3_create_module_v2() with a NULL -** destructor. -*/ -/* SQLite connection to register module with */ -/* Name of the module */ -/* Methods for the module */ -/* Client data for xCreate/xConnect */ -int sqlite3_create_module( - sqlite3* db, - const(char)* zName, - const(sqlite3_module)* p, - void* pClientData); - -/* SQLite connection to register module with */ -/* Name of the module */ -/* Methods for the module */ -/* Client data for xCreate/xConnect */ -/* Module destructor function */ -int sqlite3_create_module_v2( - sqlite3* db, - const(char)* zName, - const(sqlite3_module)* p, - void* pClientData, - void function(void*) xDestroy); - -/* -** CAPI3REF: Virtual Table Instance Object -** KEYWORDS: sqlite3_vtab -** -** Every [virtual table module] implementation uses a subclass -** of this object to describe a particular instance -** of the [virtual table]. Each subclass will -** be tailored to the specific needs of the module implementation. -** The purpose of this superclass is to define certain fields that are -** common to all module implementations. -** -** ^Virtual tables methods can set an error message by assigning a -** string obtained from [sqlite3_mprintf()] to zErrMsg. The method should -** take care that any prior string is freed by a call to [sqlite3_free()] -** prior to assigning a new string to zErrMsg. ^After the error message -** is delivered up to the client application, the string will be automatically -** freed by sqlite3_free() and the zErrMsg field will be zeroed. -*/ -struct sqlite3_vtab -{ - const(sqlite3_module)* pModule; /* The module for this virtual table */ - int nRef; /* Number of open cursors */ - char* zErrMsg; /* Error message from sqlite3_mprintf() */ - /* Virtual table implementations will typically add additional fields */ -} - -/* -** CAPI3REF: Virtual Table Cursor Object -** KEYWORDS: sqlite3_vtab_cursor {virtual table cursor} -** -** Every [virtual table module] implementation uses a subclass of the -** following structure to describe cursors that point into the -** [virtual table] and are used -** to loop through the virtual table. Cursors are created using the -** [sqlite3_module.xOpen | xOpen] method of the module and are destroyed -** by the [sqlite3_module.xClose | xClose] method. Cursors are used -** by the [xFilter], [xNext], [xEof], [xColumn], and [xRowid] methods -** of the module. Each module implementation will define -** the content of a cursor structure to suit its own needs. -** -** This superclass exists in order to define fields of the cursor that -** are common to all implementations. -*/ -struct sqlite3_vtab_cursor -{ - sqlite3_vtab* pVtab; /* Virtual table of this cursor */ - /* Virtual table implementations will typically add additional fields */ -} - -/* -** CAPI3REF: Declare The Schema Of A Virtual Table -** -** ^The [xCreate] and [xConnect] methods of a -** [virtual table module] call this interface -** to declare the format (the names and datatypes of the columns) of -** the virtual tables they implement. -*/ -int sqlite3_declare_vtab(sqlite3*, const(char)* zSQL); - -/* -** CAPI3REF: Overload A Function For A Virtual Table -** METHOD: sqlite3 -** -** ^(Virtual tables can provide alternative implementations of functions -** using the [xFindFunction] method of the [virtual table module]. -** But global versions of those functions -** must exist in order to be overloaded.)^ -** -** ^(This API makes sure a global version of a function with a particular -** name and number of parameters exists. If no such function exists -** before this API is called, a new function is created.)^ ^The implementation -** of the new function always causes an exception to be thrown. So -** the new function is not good for anything by itself. Its only -** purpose is to be a placeholder function that can be overloaded -** by a [virtual table]. -*/ -int sqlite3_overload_function(sqlite3*, const(char)* zFuncName, int nArg); - -/* -** The interface to the virtual-table mechanism defined above (back up -** to a comment remarkably similar to this one) is currently considered -** to be experimental. The interface might change in incompatible ways. -** If this is a problem for you, do not use the interface at this time. -** -** When the virtual-table mechanism stabilizes, we will declare the -** interface fixed, support it indefinitely, and remove this comment. -*/ - -/* -** CAPI3REF: A Handle To An Open BLOB -** KEYWORDS: {BLOB handle} {BLOB handles} -** -** An instance of this object represents an open BLOB on which -** [sqlite3_blob_open | incremental BLOB I/O] can be performed. -** ^Objects of this type are created by [sqlite3_blob_open()] -** and destroyed by [sqlite3_blob_close()]. -** ^The [sqlite3_blob_read()] and [sqlite3_blob_write()] interfaces -** can be used to read or write small subsections of the BLOB. -** ^The [sqlite3_blob_bytes()] interface returns the size of the BLOB in bytes. -*/ -struct sqlite3_blob; - -/* -** CAPI3REF: Open A BLOB For Incremental I/O -** METHOD: sqlite3 -** CONSTRUCTOR: sqlite3_blob -** -** ^(This interfaces opens a [BLOB handle | handle] to the BLOB located -** in row iRow, column zColumn, table zTable in database zDb; -** in other words, the same BLOB that would be selected by: -** -** <pre> -** SELECT zColumn FROM zDb.zTable WHERE [rowid] = iRow; -** </pre>)^ -** -** ^(Parameter zDb is not the filename that contains the database, but -** rather the symbolic name of the database. For attached databases, this is -** the name that appears after the AS keyword in the [ATTACH] statement. -** For the main database file, the database name is "main". For TEMP -** tables, the database name is "temp".)^ -** -** ^If the flags parameter is non-zero, then the BLOB is opened for read -** and write access. ^If the flags parameter is zero, the BLOB is opened for -** read-only access. -** -** ^(On success, [SQLITE_OK] is returned and the new [BLOB handle] is stored -** in *ppBlob. Otherwise an [error code] is returned and, unless the error -** code is SQLITE_MISUSE, *ppBlob is set to NULL.)^ ^This means that, provided -** the API is not misused, it is always safe to call [sqlite3_blob_close()] -** on *ppBlob after this function it returns. -** -** This function fails with SQLITE_ERROR if any of the following are true: -** <ul> -** <li> ^(Database zDb does not exist)^, -** <li> ^(Table zTable does not exist within database zDb)^, -** <li> ^(Table zTable is a WITHOUT ROWID table)^, -** <li> ^(Column zColumn does not exist)^, -** <li> ^(Row iRow is not present in the table)^, -** <li> ^(The specified column of row iRow contains a value that is not -** a TEXT or BLOB value)^, -** <li> ^(Column zColumn is part of an index, PRIMARY KEY or UNIQUE -** constraint and the blob is being opened for read/write access)^, -** <li> ^([foreign key constraints | Foreign key constraints] are enabled, -** column zColumn is part of a [child key] definition and the blob is -** being opened for read/write access)^. -** </ul> -** -** ^Unless it returns SQLITE_MISUSE, this function sets the -** [database connection] error code and message accessible via -** [sqlite3_errcode()] and [sqlite3_errmsg()] and related functions. -** -** A BLOB referenced by sqlite3_blob_open() may be read using the -** [sqlite3_blob_read()] interface and modified by using -** [sqlite3_blob_write()]. The [BLOB handle] can be moved to a -** different row of the same table using the [sqlite3_blob_reopen()] -** interface. However, the column, table, or database of a [BLOB handle] -** cannot be changed after the [BLOB handle] is opened. -** -** ^(If the row that a BLOB handle points to is modified by an -** [UPDATE], [DELETE], or by [ON CONFLICT] side-effects -** then the BLOB handle is marked as "expired". -** This is true if any column of the row is changed, even a column -** other than the one the BLOB handle is open on.)^ -** ^Calls to [sqlite3_blob_read()] and [sqlite3_blob_write()] for -** an expired BLOB handle fail with a return code of [SQLITE_ABORT]. -** ^(Changes written into a BLOB prior to the BLOB expiring are not -** rolled back by the expiration of the BLOB. Such changes will eventually -** commit if the transaction continues to completion.)^ -** -** ^Use the [sqlite3_blob_bytes()] interface to determine the size of -** the opened blob. ^The size of a blob may not be changed by this -** interface. Use the [UPDATE] SQL command to change the size of a -** blob. -** -** ^The [sqlite3_bind_zeroblob()] and [sqlite3_result_zeroblob()] interfaces -** and the built-in [zeroblob] SQL function may be used to create a -** zero-filled blob to read or write using the incremental-blob interface. -** -** To avoid a resource leak, every open [BLOB handle] should eventually -** be released by a call to [sqlite3_blob_close()]. -** -** See also: [sqlite3_blob_close()], -** [sqlite3_blob_reopen()], [sqlite3_blob_read()], -** [sqlite3_blob_bytes()], [sqlite3_blob_write()]. -*/ -int sqlite3_blob_open( - sqlite3*, - const(char)* zDb, - const(char)* zTable, - const(char)* zColumn, - sqlite3_int64 iRow, - int flags, - sqlite3_blob** ppBlob); - -/* -** CAPI3REF: Move a BLOB Handle to a New Row -** METHOD: sqlite3_blob -** -** ^This function is used to move an existing [BLOB handle] so that it points -** to a different row of the same database table. ^The new row is identified -** by the rowid value passed as the second argument. Only the row can be -** changed. ^The database, table and column on which the blob handle is open -** remain the same. Moving an existing [BLOB handle] to a new row is -** faster than closing the existing handle and opening a new one. -** -** ^(The new row must meet the same criteria as for [sqlite3_blob_open()] - -** it must exist and there must be either a blob or text value stored in -** the nominated column.)^ ^If the new row is not present in the table, or if -** it does not contain a blob or text value, or if another error occurs, an -** SQLite error code is returned and the blob handle is considered aborted. -** ^All subsequent calls to [sqlite3_blob_read()], [sqlite3_blob_write()] or -** [sqlite3_blob_reopen()] on an aborted blob handle immediately return -** SQLITE_ABORT. ^Calling [sqlite3_blob_bytes()] on an aborted blob handle -** always returns zero. -** -** ^This function sets the database handle error code and message. -*/ -int sqlite3_blob_reopen(sqlite3_blob*, sqlite3_int64); - -/* -** CAPI3REF: Close A BLOB Handle -** DESTRUCTOR: sqlite3_blob -** -** ^This function closes an open [BLOB handle]. ^(The BLOB handle is closed -** unconditionally. Even if this routine returns an error code, the -** handle is still closed.)^ -** -** ^If the blob handle being closed was opened for read-write access, and if -** the database is in auto-commit mode and there are no other open read-write -** blob handles or active write statements, the current transaction is -** committed. ^If an error occurs while committing the transaction, an error -** code is returned and the transaction rolled back. -** -** Calling this function with an argument that is not a NULL pointer or an -** open blob handle results in undefined behaviour. ^Calling this routine -** with a null pointer (such as would be returned by a failed call to -** [sqlite3_blob_open()]) is a harmless no-op. ^Otherwise, if this function -** is passed a valid open blob handle, the values returned by the -** sqlite3_errcode() and sqlite3_errmsg() functions are set before returning. -*/ -int sqlite3_blob_close(sqlite3_blob*); - -/* -** CAPI3REF: Return The Size Of An Open BLOB -** METHOD: sqlite3_blob -** -** ^Returns the size in bytes of the BLOB accessible via the -** successfully opened [BLOB handle] in its only argument. ^The -** incremental blob I/O routines can only read or overwriting existing -** blob content; they cannot change the size of a blob. -** -** This routine only works on a [BLOB handle] which has been created -** by a prior successful call to [sqlite3_blob_open()] and which has not -** been closed by [sqlite3_blob_close()]. Passing any other pointer in -** to this routine results in undefined and probably undesirable behavior. -*/ -int sqlite3_blob_bytes(sqlite3_blob*); - -/* -** CAPI3REF: Read Data From A BLOB Incrementally -** METHOD: sqlite3_blob -** -** ^(This function is used to read data from an open [BLOB handle] into a -** caller-supplied buffer. N bytes of data are copied into buffer Z -** from the open BLOB, starting at offset iOffset.)^ -** -** ^If offset iOffset is less than N bytes from the end of the BLOB, -** [SQLITE_ERROR] is returned and no data is read. ^If N or iOffset is -** less than zero, [SQLITE_ERROR] is returned and no data is read. -** ^The size of the blob (and hence the maximum value of N+iOffset) -** can be determined using the [sqlite3_blob_bytes()] interface. -** -** ^An attempt to read from an expired [BLOB handle] fails with an -** error code of [SQLITE_ABORT]. -** -** ^(On success, sqlite3_blob_read() returns SQLITE_OK. -** Otherwise, an [error code] or an [extended error code] is returned.)^ -** -** This routine only works on a [BLOB handle] which has been created -** by a prior successful call to [sqlite3_blob_open()] and which has not -** been closed by [sqlite3_blob_close()]. Passing any other pointer in -** to this routine results in undefined and probably undesirable behavior. -** -** See also: [sqlite3_blob_write()]. -*/ -int sqlite3_blob_read(sqlite3_blob*, void* Z, int N, int iOffset); - -/* -** CAPI3REF: Write Data Into A BLOB Incrementally -** METHOD: sqlite3_blob -** -** ^(This function is used to write data into an open [BLOB handle] from a -** caller-supplied buffer. N bytes of data are copied from the buffer Z -** into the open BLOB, starting at offset iOffset.)^ -** -** ^(On success, sqlite3_blob_write() returns SQLITE_OK. -** Otherwise, an [error code] or an [extended error code] is returned.)^ -** ^Unless SQLITE_MISUSE is returned, this function sets the -** [database connection] error code and message accessible via -** [sqlite3_errcode()] and [sqlite3_errmsg()] and related functions. -** -** ^If the [BLOB handle] passed as the first argument was not opened for -** writing (the flags parameter to [sqlite3_blob_open()] was zero), -** this function returns [SQLITE_READONLY]. -** -** This function may only modify the contents of the BLOB; it is -** not possible to increase the size of a BLOB using this API. -** ^If offset iOffset is less than N bytes from the end of the BLOB, -** [SQLITE_ERROR] is returned and no data is written. The size of the -** BLOB (and hence the maximum value of N+iOffset) can be determined -** using the [sqlite3_blob_bytes()] interface. ^If N or iOffset are less -** than zero [SQLITE_ERROR] is returned and no data is written. -** -** ^An attempt to write to an expired [BLOB handle] fails with an -** error code of [SQLITE_ABORT]. ^Writes to the BLOB that occurred -** before the [BLOB handle] expired are not rolled back by the -** expiration of the handle, though of course those changes might -** have been overwritten by the statement that expired the BLOB handle -** or by other independent statements. -** -** This routine only works on a [BLOB handle] which has been created -** by a prior successful call to [sqlite3_blob_open()] and which has not -** been closed by [sqlite3_blob_close()]. Passing any other pointer in -** to this routine results in undefined and probably undesirable behavior. -** -** See also: [sqlite3_blob_read()]. -*/ -int sqlite3_blob_write(sqlite3_blob*, const(void)* z, int n, int iOffset); - -/* -** CAPI3REF: Virtual File System Objects -** -** A virtual filesystem (VFS) is an [sqlite3_vfs] object -** that SQLite uses to interact -** with the underlying operating system. Most SQLite builds come with a -** single default VFS that is appropriate for the host computer. -** New VFSes can be registered and existing VFSes can be unregistered. -** The following interfaces are provided. -** -** ^The sqlite3_vfs_find() interface returns a pointer to a VFS given its name. -** ^Names are case sensitive. -** ^Names are zero-terminated UTF-8 strings. -** ^If there is no match, a NULL pointer is returned. -** ^If zVfsName is NULL then the default VFS is returned. -** -** ^New VFSes are registered with sqlite3_vfs_register(). -** ^Each new VFS becomes the default VFS if the makeDflt flag is set. -** ^The same VFS can be registered multiple times without injury. -** ^To make an existing VFS into the default VFS, register it again -** with the makeDflt flag set. If two different VFSes with the -** same name are registered, the behavior is undefined. If a -** VFS is registered with a name that is NULL or an empty string, -** then the behavior is undefined. -** -** ^Unregister a VFS with the sqlite3_vfs_unregister() interface. -** ^(If the default VFS is unregistered, another VFS is chosen as -** the default. The choice for the new VFS is arbitrary.)^ -*/ -sqlite3_vfs* sqlite3_vfs_find(const(char)* zVfsName); -int sqlite3_vfs_register(sqlite3_vfs*, int makeDflt); -int sqlite3_vfs_unregister(sqlite3_vfs*); - -/* -** CAPI3REF: Mutexes -** -** The SQLite core uses these routines for thread -** synchronization. Though they are intended for internal -** use by SQLite, code that links against SQLite is -** permitted to use any of these routines. -** -** The SQLite source code contains multiple implementations -** of these mutex routines. An appropriate implementation -** is selected automatically at compile-time. The following -** implementations are available in the SQLite core: -** -** <ul> -** <li> SQLITE_MUTEX_PTHREADS -** <li> SQLITE_MUTEX_W32 -** <li> SQLITE_MUTEX_NOOP -** </ul> -** -** The SQLITE_MUTEX_NOOP implementation is a set of routines -** that does no real locking and is appropriate for use in -** a single-threaded application. The SQLITE_MUTEX_PTHREADS and -** SQLITE_MUTEX_W32 implementations are appropriate for use on Unix -** and Windows. -** -** If SQLite is compiled with the SQLITE_MUTEX_APPDEF preprocessor -** macro defined (with "-DSQLITE_MUTEX_APPDEF=1"), then no mutex -** implementation is included with the library. In this case the -** application must supply a custom mutex implementation using the -** [SQLITE_CONFIG_MUTEX] option of the sqlite3_config() function -** before calling sqlite3_initialize() or any other public sqlite3_ -** function that calls sqlite3_initialize(). -** -** ^The sqlite3_mutex_alloc() routine allocates a new -** mutex and returns a pointer to it. ^The sqlite3_mutex_alloc() -** routine returns NULL if it is unable to allocate the requested -** mutex. The argument to sqlite3_mutex_alloc() must one of these -** integer constants: -** -** <ul> -** <li> SQLITE_MUTEX_FAST -** <li> SQLITE_MUTEX_RECURSIVE -** <li> SQLITE_MUTEX_STATIC_MASTER -** <li> SQLITE_MUTEX_STATIC_MEM -** <li> SQLITE_MUTEX_STATIC_OPEN -** <li> SQLITE_MUTEX_STATIC_PRNG -** <li> SQLITE_MUTEX_STATIC_LRU -** <li> SQLITE_MUTEX_STATIC_PMEM -** <li> SQLITE_MUTEX_STATIC_APP1 -** <li> SQLITE_MUTEX_STATIC_APP2 -** <li> SQLITE_MUTEX_STATIC_APP3 -** <li> SQLITE_MUTEX_STATIC_VFS1 -** <li> SQLITE_MUTEX_STATIC_VFS2 -** <li> SQLITE_MUTEX_STATIC_VFS3 -** </ul> -** -** ^The first two constants (SQLITE_MUTEX_FAST and SQLITE_MUTEX_RECURSIVE) -** cause sqlite3_mutex_alloc() to create -** a new mutex. ^The new mutex is recursive when SQLITE_MUTEX_RECURSIVE -** is used but not necessarily so when SQLITE_MUTEX_FAST is used. -** The mutex implementation does not need to make a distinction -** between SQLITE_MUTEX_RECURSIVE and SQLITE_MUTEX_FAST if it does -** not want to. SQLite will only request a recursive mutex in -** cases where it really needs one. If a faster non-recursive mutex -** implementation is available on the host platform, the mutex subsystem -** might return such a mutex in response to SQLITE_MUTEX_FAST. -** -** ^The other allowed parameters to sqlite3_mutex_alloc() (anything other -** than SQLITE_MUTEX_FAST and SQLITE_MUTEX_RECURSIVE) each return -** a pointer to a static preexisting mutex. ^Nine static mutexes are -** used by the current version of SQLite. Future versions of SQLite -** may add additional static mutexes. Static mutexes are for internal -** use by SQLite only. Applications that use SQLite mutexes should -** use only the dynamic mutexes returned by SQLITE_MUTEX_FAST or -** SQLITE_MUTEX_RECURSIVE. -** -** ^Note that if one of the dynamic mutex parameters (SQLITE_MUTEX_FAST -** or SQLITE_MUTEX_RECURSIVE) is used then sqlite3_mutex_alloc() -** returns a different mutex on every call. ^For the static -** mutex types, the same mutex is returned on every call that has -** the same type number. -** -** ^The sqlite3_mutex_free() routine deallocates a previously -** allocated dynamic mutex. Attempting to deallocate a static -** mutex results in undefined behavior. -** -** ^The sqlite3_mutex_enter() and sqlite3_mutex_try() routines attempt -** to enter a mutex. ^If another thread is already within the mutex, -** sqlite3_mutex_enter() will block and sqlite3_mutex_try() will return -** SQLITE_BUSY. ^The sqlite3_mutex_try() interface returns [SQLITE_OK] -** upon successful entry. ^(Mutexes created using -** SQLITE_MUTEX_RECURSIVE can be entered multiple times by the same thread. -** In such cases, the -** mutex must be exited an equal number of times before another thread -** can enter.)^ If the same thread tries to enter any mutex other -** than an SQLITE_MUTEX_RECURSIVE more than once, the behavior is undefined. -** -** ^(Some systems (for example, Windows 95) do not support the operation -** implemented by sqlite3_mutex_try(). On those systems, sqlite3_mutex_try() -** will always return SQLITE_BUSY. The SQLite core only ever uses -** sqlite3_mutex_try() as an optimization so this is acceptable -** behavior.)^ -** -** ^The sqlite3_mutex_leave() routine exits a mutex that was -** previously entered by the same thread. The behavior -** is undefined if the mutex is not currently entered by the -** calling thread or is not currently allocated. -** -** ^If the argument to sqlite3_mutex_enter(), sqlite3_mutex_try(), or -** sqlite3_mutex_leave() is a NULL pointer, then all three routines -** behave as no-ops. -** -** See also: [sqlite3_mutex_held()] and [sqlite3_mutex_notheld()]. -*/ -sqlite3_mutex* sqlite3_mutex_alloc(int); -void sqlite3_mutex_free(sqlite3_mutex*); -void sqlite3_mutex_enter(sqlite3_mutex*); -int sqlite3_mutex_try(sqlite3_mutex*); -void sqlite3_mutex_leave(sqlite3_mutex*); - -/* -** CAPI3REF: Mutex Methods Object -** -** An instance of this structure defines the low-level routines -** used to allocate and use mutexes. -** -** Usually, the default mutex implementations provided by SQLite are -** sufficient, however the application has the option of substituting a custom -** implementation for specialized deployments or systems for which SQLite -** does not provide a suitable implementation. In this case, the application -** creates and populates an instance of this structure to pass -** to sqlite3_config() along with the [SQLITE_CONFIG_MUTEX] option. -** Additionally, an instance of this structure can be used as an -** output variable when querying the system for the current mutex -** implementation, using the [SQLITE_CONFIG_GETMUTEX] option. -** -** ^The xMutexInit method defined by this structure is invoked as -** part of system initialization by the sqlite3_initialize() function. -** ^The xMutexInit routine is called by SQLite exactly once for each -** effective call to [sqlite3_initialize()]. -** -** ^The xMutexEnd method defined by this structure is invoked as -** part of system shutdown by the sqlite3_shutdown() function. The -** implementation of this method is expected to release all outstanding -** resources obtained by the mutex methods implementation, especially -** those obtained by the xMutexInit method. ^The xMutexEnd() -** interface is invoked exactly once for each call to [sqlite3_shutdown()]. -** -** ^(The remaining seven methods defined by this structure (xMutexAlloc, -** xMutexFree, xMutexEnter, xMutexTry, xMutexLeave, xMutexHeld and -** xMutexNotheld) implement the following interfaces (respectively): -** -** <ul> -** <li> [sqlite3_mutex_alloc()] </li> -** <li> [sqlite3_mutex_free()] </li> -** <li> [sqlite3_mutex_enter()] </li> -** <li> [sqlite3_mutex_try()] </li> -** <li> [sqlite3_mutex_leave()] </li> -** <li> [sqlite3_mutex_held()] </li> -** <li> [sqlite3_mutex_notheld()] </li> -** </ul>)^ -** -** The only difference is that the public sqlite3_XXX functions enumerated -** above silently ignore any invocations that pass a NULL pointer instead -** of a valid mutex handle. The implementations of the methods defined -** by this structure are not required to handle this case, the results -** of passing a NULL pointer instead of a valid mutex handle are undefined -** (i.e. it is acceptable to provide an implementation that segfaults if -** it is passed a NULL pointer). -** -** The xMutexInit() method must be threadsafe. It must be harmless to -** invoke xMutexInit() multiple times within the same process and without -** intervening calls to xMutexEnd(). Second and subsequent calls to -** xMutexInit() must be no-ops. -** -** xMutexInit() must not use SQLite memory allocation ([sqlite3_malloc()] -** and its associates). Similarly, xMutexAlloc() must not use SQLite memory -** allocation for a static mutex. ^However xMutexAlloc() may use SQLite -** memory allocation for a fast or recursive mutex. -** -** ^SQLite will invoke the xMutexEnd() method when [sqlite3_shutdown()] is -** called, but only if the prior call to xMutexInit returned SQLITE_OK. -** If xMutexInit fails in any way, it is expected to clean up after itself -** prior to returning. -*/ -struct sqlite3_mutex_methods -{ - int function() xMutexInit; - int function() xMutexEnd; - sqlite3_mutex* function(int) xMutexAlloc; - void function(sqlite3_mutex*) xMutexFree; - void function(sqlite3_mutex*) xMutexEnter; - int function(sqlite3_mutex*) xMutexTry; - void function(sqlite3_mutex*) xMutexLeave; - int function(sqlite3_mutex*) xMutexHeld; - int function(sqlite3_mutex*) xMutexNotheld; -} - -/* -** CAPI3REF: Mutex Verification Routines -** -** The sqlite3_mutex_held() and sqlite3_mutex_notheld() routines -** are intended for use inside assert() statements. The SQLite core -** never uses these routines except inside an assert() and applications -** are advised to follow the lead of the core. The SQLite core only -** provides implementations for these routines when it is compiled -** with the SQLITE_DEBUG flag. External mutex implementations -** are only required to provide these routines if SQLITE_DEBUG is -** defined and if NDEBUG is not defined. -** -** These routines should return true if the mutex in their argument -** is held or not held, respectively, by the calling thread. -** -** The implementation is not required to provide versions of these -** routines that actually work. If the implementation does not provide working -** versions of these routines, it should at least provide stubs that always -** return true so that one does not get spurious assertion failures. -** -** If the argument to sqlite3_mutex_held() is a NULL pointer then -** the routine should return 1. This seems counter-intuitive since -** clearly the mutex cannot be held if it does not exist. But -** the reason the mutex does not exist is because the build is not -** using mutexes. And we do not want the assert() containing the -** call to sqlite3_mutex_held() to fail, so a non-zero return is -** the appropriate thing to do. The sqlite3_mutex_notheld() -** interface should also return 1 when given a NULL pointer. -*/ - -int sqlite3_mutex_held(sqlite3_mutex*); -int sqlite3_mutex_notheld(sqlite3_mutex*); - -/* -** CAPI3REF: Mutex Types -** -** The [sqlite3_mutex_alloc()] interface takes a single argument -** which is one of these integer constants. -** -** The set of static mutexes may change from one SQLite release to the -** next. Applications that override the built-in mutex logic must be -** prepared to accommodate additional static mutexes. -*/ -enum SQLITE_MUTEX_FAST = 0; -enum SQLITE_MUTEX_RECURSIVE = 1; -enum SQLITE_MUTEX_STATIC_MASTER = 2; -enum SQLITE_MUTEX_STATIC_MEM = 3; /* sqlite3_malloc() */ -enum SQLITE_MUTEX_STATIC_MEM2 = 4; /* NOT USED */ -enum SQLITE_MUTEX_STATIC_OPEN = 4; /* sqlite3BtreeOpen() */ -enum SQLITE_MUTEX_STATIC_PRNG = 5; /* sqlite3_randomness() */ -enum SQLITE_MUTEX_STATIC_LRU = 6; /* lru page list */ -enum SQLITE_MUTEX_STATIC_LRU2 = 7; /* NOT USED */ -enum SQLITE_MUTEX_STATIC_PMEM = 7; /* sqlite3PageMalloc() */ -enum SQLITE_MUTEX_STATIC_APP1 = 8; /* For use by application */ -enum SQLITE_MUTEX_STATIC_APP2 = 9; /* For use by application */ -enum SQLITE_MUTEX_STATIC_APP3 = 10; /* For use by application */ -enum SQLITE_MUTEX_STATIC_VFS1 = 11; /* For use by built-in VFS */ -enum SQLITE_MUTEX_STATIC_VFS2 = 12; /* For use by extension VFS */ -enum SQLITE_MUTEX_STATIC_VFS3 = 13; /* For use by application VFS */ - -/* -** CAPI3REF: Retrieve the mutex for a database connection -** METHOD: sqlite3 -** -** ^This interface returns a pointer the [sqlite3_mutex] object that -** serializes access to the [database connection] given in the argument -** when the [threading mode] is Serialized. -** ^If the [threading mode] is Single-thread or Multi-thread then this -** routine returns a NULL pointer. -*/ -sqlite3_mutex* sqlite3_db_mutex(sqlite3*); - -/* -** CAPI3REF: Low-Level Control Of Database Files -** METHOD: sqlite3 -** KEYWORDS: {file control} -** -** ^The [sqlite3_file_control()] interface makes a direct call to the -** xFileControl method for the [sqlite3_io_methods] object associated -** with a particular database identified by the second argument. ^The -** name of the database is "main" for the main database or "temp" for the -** TEMP database, or the name that appears after the AS keyword for -** databases that are added using the [ATTACH] SQL command. -** ^A NULL pointer can be used in place of "main" to refer to the -** main database file. -** ^The third and fourth parameters to this routine -** are passed directly through to the second and third parameters of -** the xFileControl method. ^The return value of the xFileControl -** method becomes the return value of this routine. -** -** A few opcodes for [sqlite3_file_control()] are handled directly -** by the SQLite core and never invoke the -** sqlite3_io_methods.xFileControl method. -** ^The [SQLITE_FCNTL_FILE_POINTER] value for the op parameter causes -** a pointer to the underlying [sqlite3_file] object to be written into -** the space pointed to by the 4th parameter. The -** [SQLITE_FCNTL_JOURNAL_POINTER] works similarly except that it returns -** the [sqlite3_file] object associated with the journal file instead of -** the main database. The [SQLITE_FCNTL_VFS_POINTER] opcode returns -** a pointer to the underlying [sqlite3_vfs] object for the file. -** The [SQLITE_FCNTL_DATA_VERSION] returns the data version counter -** from the pager. -** -** ^If the second parameter (zDbName) does not match the name of any -** open database file, then SQLITE_ERROR is returned. ^This error -** code is not remembered and will not be recalled by [sqlite3_errcode()] -** or [sqlite3_errmsg()]. The underlying xFileControl method might -** also return SQLITE_ERROR. There is no way to distinguish between -** an incorrect zDbName and an SQLITE_ERROR return from the underlying -** xFileControl method. -** -** See also: [file control opcodes] -*/ -int sqlite3_file_control(sqlite3*, const(char)* zDbName, int op, void*); - -/* -** CAPI3REF: Testing Interface -** -** ^The sqlite3_test_control() interface is used to read out internal -** state of SQLite and to inject faults into SQLite for testing -** purposes. ^The first parameter is an operation code that determines -** the number, meaning, and operation of all subsequent parameters. -** -** This interface is not for use by applications. It exists solely -** for verifying the correct operation of the SQLite library. Depending -** on how the SQLite library is compiled, this interface might not exist. -** -** The details of the operation codes, their meanings, the parameters -** they take, and what they do are all subject to change without notice. -** Unlike most of the SQLite API, this function is not guaranteed to -** operate consistently from one release to the next. -*/ -int sqlite3_test_control(int op, ...); - -/* -** CAPI3REF: Testing Interface Operation Codes -** -** These constants are the valid operation code parameters used -** as the first argument to [sqlite3_test_control()]. -** -** These parameters and their meanings are subject to change -** without notice. These values are for testing purposes only. -** Applications should not use any of these parameters or the -** [sqlite3_test_control()] interface. -*/ -enum SQLITE_TESTCTRL_FIRST = 5; -enum SQLITE_TESTCTRL_PRNG_SAVE = 5; -enum SQLITE_TESTCTRL_PRNG_RESTORE = 6; -enum SQLITE_TESTCTRL_PRNG_RESET = 7; -enum SQLITE_TESTCTRL_BITVEC_TEST = 8; -enum SQLITE_TESTCTRL_FAULT_INSTALL = 9; -enum SQLITE_TESTCTRL_BENIGN_MALLOC_HOOKS = 10; -enum SQLITE_TESTCTRL_PENDING_BYTE = 11; -enum SQLITE_TESTCTRL_ASSERT = 12; -enum SQLITE_TESTCTRL_ALWAYS = 13; -enum SQLITE_TESTCTRL_RESERVE = 14; -enum SQLITE_TESTCTRL_OPTIMIZATIONS = 15; -enum SQLITE_TESTCTRL_ISKEYWORD = 16; /* NOT USED */ -enum SQLITE_TESTCTRL_SCRATCHMALLOC = 17; /* NOT USED */ -enum SQLITE_TESTCTRL_LOCALTIME_FAULT = 18; -enum SQLITE_TESTCTRL_EXPLAIN_STMT = 19; /* NOT USED */ -enum SQLITE_TESTCTRL_ONCE_RESET_THRESHOLD = 19; -enum SQLITE_TESTCTRL_NEVER_CORRUPT = 20; -enum SQLITE_TESTCTRL_VDBE_COVERAGE = 21; -enum SQLITE_TESTCTRL_BYTEORDER = 22; -enum SQLITE_TESTCTRL_ISINIT = 23; -enum SQLITE_TESTCTRL_SORTER_MMAP = 24; -enum SQLITE_TESTCTRL_IMPOSTER = 25; -enum SQLITE_TESTCTRL_PARSER_COVERAGE = 26; -enum SQLITE_TESTCTRL_LAST = 26; /* Largest TESTCTRL */ - -/* -** CAPI3REF: SQL Keyword Checking -** -** These routines provide access to the set of SQL language keywords -** recognized by SQLite. Applications can uses these routines to determine -** whether or not a specific identifier needs to be escaped (for example, -** by enclosing in double-quotes) so as not to confuse the parser. -** -** The sqlite3_keyword_count() interface returns the number of distinct -** keywords understood by SQLite. -** -** The sqlite3_keyword_name(N,Z,L) interface finds the N-th keyword and -** makes *Z point to that keyword expressed as UTF8 and writes the number -** of bytes in the keyword into *L. The string that *Z points to is not -** zero-terminated. The sqlite3_keyword_name(N,Z,L) routine returns -** SQLITE_OK if N is within bounds and SQLITE_ERROR if not. If either Z -** or L are NULL or invalid pointers then calls to -** sqlite3_keyword_name(N,Z,L) result in undefined behavior. -** -** The sqlite3_keyword_check(Z,L) interface checks to see whether or not -** the L-byte UTF8 identifier that Z points to is a keyword, returning non-zero -** if it is and zero if not. -** -** The parser used by SQLite is forgiving. It is often possible to use -** a keyword as an identifier as long as such use does not result in a -** parsing ambiguity. For example, the statement -** "CREATE TABLE BEGIN(REPLACE,PRAGMA,END);" is accepted by SQLite, and -** creates a new table named "BEGIN" with three columns named -** "REPLACE", "PRAGMA", and "END". Nevertheless, best practice is to avoid -** using keywords as identifiers. Common techniques used to avoid keyword -** name collisions include: -** <ul> -** <li> Put all identifier names inside double-quotes. This is the official -** SQL way to escape identifier names. -** <li> Put identifier names inside [...]. This is not standard SQL, -** but it is what SQL Server does and so lots of programmers use this -** technique. -** <li> Begin every identifier with the letter "Z" as no SQL keywords start -** with "Z". -** <li> Include a digit somewhere in every identifier name. -** </ul> -** -** Note that the number of keywords understood by SQLite can depend on -** compile-time options. For example, "VACUUM" is not a keyword if -** SQLite is compiled with the [-DSQLITE_OMIT_VACUUM] option. Also, -** new keywords may be added to future releases of SQLite. -*/ -int sqlite3_keyword_count(); -int sqlite3_keyword_name(int, const(char*)*, int*); -int sqlite3_keyword_check(const(char)*, int); - -/* -** CAPI3REF: Dynamic String Object -** KEYWORDS: {dynamic string} -** -** An instance of the sqlite3_str object contains a dynamically-sized -** string under construction. -** -** The lifecycle of an sqlite3_str object is as follows: -** <ol> -** <li> ^The sqlite3_str object is created using [sqlite3_str_new()]. -** <li> ^Text is appended to the sqlite3_str object using various -** methods, such as [sqlite3_str_appendf()]. -** <li> ^The sqlite3_str object is destroyed and the string it created -** is returned using the [sqlite3_str_finish()] interface. -** </ol> -*/ -struct sqlite3_str; - -/* -** CAPI3REF: Create A New Dynamic String Object -** CONSTRUCTOR: sqlite3_str -** -** ^The [sqlite3_str_new(D)] interface allocates and initializes -** a new [sqlite3_str] object. To avoid memory leaks, the object returned by -** [sqlite3_str_new()] must be freed by a subsequent call to -** [sqlite3_str_finish(X)]. -** -** ^The [sqlite3_str_new(D)] interface always returns a pointer to a -** valid [sqlite3_str] object, though in the event of an out-of-memory -** error the returned object might be a special singleton that will -** silently reject new text, always return SQLITE_NOMEM from -** [sqlite3_str_errcode()], always return 0 for -** [sqlite3_str_length()], and always return NULL from -** [sqlite3_str_finish(X)]. It is always safe to use the value -** returned by [sqlite3_str_new(D)] as the sqlite3_str parameter -** to any of the other [sqlite3_str] methods. -** -** The D parameter to [sqlite3_str_new(D)] may be NULL. If the -** D parameter in [sqlite3_str_new(D)] is not NULL, then the maximum -** length of the string contained in the [sqlite3_str] object will be -** the value set for [sqlite3_limit](D,[SQLITE_LIMIT_LENGTH]) instead -** of [SQLITE_MAX_LENGTH]. -*/ -sqlite3_str* sqlite3_str_new(sqlite3*); - -/* -** CAPI3REF: Finalize A Dynamic String -** DESTRUCTOR: sqlite3_str -** -** ^The [sqlite3_str_finish(X)] interface destroys the sqlite3_str object X -** and returns a pointer to a memory buffer obtained from [sqlite3_malloc64()] -** that contains the constructed string. The calling application should -** pass the returned value to [sqlite3_free()] to avoid a memory leak. -** ^The [sqlite3_str_finish(X)] interface may return a NULL pointer if any -** errors were encountered during construction of the string. ^The -** [sqlite3_str_finish(X)] interface will also return a NULL pointer if the -** string in [sqlite3_str] object X is zero bytes long. -*/ -char* sqlite3_str_finish(sqlite3_str*); - -/* -** CAPI3REF: Add Content To A Dynamic String -** METHOD: sqlite3_str -** -** These interfaces add content to an sqlite3_str object previously obtained -** from [sqlite3_str_new()]. -** -** ^The [sqlite3_str_appendf(X,F,...)] and -** [sqlite3_str_vappendf(X,F,V)] interfaces uses the [built-in printf] -** functionality of SQLite to append formatted text onto the end of -** [sqlite3_str] object X. -** -** ^The [sqlite3_str_append(X,S,N)] method appends exactly N bytes from string S -** onto the end of the [sqlite3_str] object X. N must be non-negative. -** S must contain at least N non-zero bytes of content. To append a -** zero-terminated string in its entirety, use the [sqlite3_str_appendall()] -** method instead. -** -** ^The [sqlite3_str_appendall(X,S)] method appends the complete content of -** zero-terminated string S onto the end of [sqlite3_str] object X. -** -** ^The [sqlite3_str_appendchar(X,N,C)] method appends N copies of the -** single-byte character C onto the end of [sqlite3_str] object X. -** ^This method can be used, for example, to add whitespace indentation. -** -** ^The [sqlite3_str_reset(X)] method resets the string under construction -** inside [sqlite3_str] object X back to zero bytes in length. -** -** These methods do not return a result code. ^If an error occurs, that fact -** is recorded in the [sqlite3_str] object and can be recovered by a -** subsequent call to [sqlite3_str_errcode(X)]. -*/ -void sqlite3_str_appendf(sqlite3_str*, const(char)* zFormat, ...); -void sqlite3_str_vappendf(sqlite3_str*, const(char)* zFormat, va_list); -void sqlite3_str_append(sqlite3_str*, const(char)* zIn, int N); -void sqlite3_str_appendall(sqlite3_str*, const(char)* zIn); -void sqlite3_str_appendchar(sqlite3_str*, int N, char C); -void sqlite3_str_reset(sqlite3_str*); - -/* -** CAPI3REF: Status Of A Dynamic String -** METHOD: sqlite3_str -** -** These interfaces return the current status of an [sqlite3_str] object. -** -** ^If any prior errors have occurred while constructing the dynamic string -** in sqlite3_str X, then the [sqlite3_str_errcode(X)] method will return -** an appropriate error code. ^The [sqlite3_str_errcode(X)] method returns -** [SQLITE_NOMEM] following any out-of-memory error, or -** [SQLITE_TOOBIG] if the size of the dynamic string exceeds -** [SQLITE_MAX_LENGTH], or [SQLITE_OK] if there have been no errors. -** -** ^The [sqlite3_str_length(X)] method returns the current length, in bytes, -** of the dynamic string under construction in [sqlite3_str] object X. -** ^The length returned by [sqlite3_str_length(X)] does not include the -** zero-termination byte. -** -** ^The [sqlite3_str_value(X)] method returns a pointer to the current -** content of the dynamic string under construction in X. The value -** returned by [sqlite3_str_value(X)] is managed by the sqlite3_str object X -** and might be freed or altered by any subsequent method on the same -** [sqlite3_str] object. Applications must not used the pointer returned -** [sqlite3_str_value(X)] after any subsequent method call on the same -** object. ^Applications may change the content of the string returned -** by [sqlite3_str_value(X)] as long as they do not write into any bytes -** outside the range of 0 to [sqlite3_str_length(X)] and do not read or -** write any byte after any subsequent sqlite3_str method call. -*/ -int sqlite3_str_errcode(sqlite3_str*); -int sqlite3_str_length(sqlite3_str*); -char* sqlite3_str_value(sqlite3_str*); - -/* -** CAPI3REF: SQLite Runtime Status -** -** ^These interfaces are used to retrieve runtime status information -** about the performance of SQLite, and optionally to reset various -** highwater marks. ^The first argument is an integer code for -** the specific parameter to measure. ^(Recognized integer codes -** are of the form [status parameters | SQLITE_STATUS_...].)^ -** ^The current value of the parameter is returned into *pCurrent. -** ^The highest recorded value is returned in *pHighwater. ^If the -** resetFlag is true, then the highest record value is reset after -** *pHighwater is written. ^(Some parameters do not record the highest -** value. For those parameters -** nothing is written into *pHighwater and the resetFlag is ignored.)^ -** ^(Other parameters record only the highwater mark and not the current -** value. For these latter parameters nothing is written into *pCurrent.)^ -** -** ^The sqlite3_status() and sqlite3_status64() routines return -** SQLITE_OK on success and a non-zero [error code] on failure. -** -** If either the current value or the highwater mark is too large to -** be represented by a 32-bit integer, then the values returned by -** sqlite3_status() are undefined. -** -** See also: [sqlite3_db_status()] -*/ -int sqlite3_status(int op, int* pCurrent, int* pHighwater, int resetFlag); -int sqlite3_status64( - int op, - sqlite3_int64* pCurrent, - sqlite3_int64* pHighwater, - int resetFlag); - -/* -** CAPI3REF: Status Parameters -** KEYWORDS: {status parameters} -** -** These integer constants designate various run-time status parameters -** that can be returned by [sqlite3_status()]. -** -** <dl> -** [[SQLITE_STATUS_MEMORY_USED]] ^(<dt>SQLITE_STATUS_MEMORY_USED</dt> -** <dd>This parameter is the current amount of memory checked out -** using [sqlite3_malloc()], either directly or indirectly. The -** figure includes calls made to [sqlite3_malloc()] by the application -** and internal memory usage by the SQLite library. Auxiliary page-cache -** memory controlled by [SQLITE_CONFIG_PAGECACHE] is not included in -** this parameter. The amount returned is the sum of the allocation -** sizes as reported by the xSize method in [sqlite3_mem_methods].</dd>)^ -** -** [[SQLITE_STATUS_MALLOC_SIZE]] ^(<dt>SQLITE_STATUS_MALLOC_SIZE</dt> -** <dd>This parameter records the largest memory allocation request -** handed to [sqlite3_malloc()] or [sqlite3_realloc()] (or their -** internal equivalents). Only the value returned in the -** *pHighwater parameter to [sqlite3_status()] is of interest. -** The value written into the *pCurrent parameter is undefined.</dd>)^ -** -** [[SQLITE_STATUS_MALLOC_COUNT]] ^(<dt>SQLITE_STATUS_MALLOC_COUNT</dt> -** <dd>This parameter records the number of separate memory allocations -** currently checked out.</dd>)^ -** -** [[SQLITE_STATUS_PAGECACHE_USED]] ^(<dt>SQLITE_STATUS_PAGECACHE_USED</dt> -** <dd>This parameter returns the number of pages used out of the -** [pagecache memory allocator] that was configured using -** [SQLITE_CONFIG_PAGECACHE]. The -** value returned is in pages, not in bytes.</dd>)^ -** -** [[SQLITE_STATUS_PAGECACHE_OVERFLOW]] -** ^(<dt>SQLITE_STATUS_PAGECACHE_OVERFLOW</dt> -** <dd>This parameter returns the number of bytes of page cache -** allocation which could not be satisfied by the [SQLITE_CONFIG_PAGECACHE] -** buffer and where forced to overflow to [sqlite3_malloc()]. The -** returned value includes allocations that overflowed because they -** where too large (they were larger than the "sz" parameter to -** [SQLITE_CONFIG_PAGECACHE]) and allocations that overflowed because -** no space was left in the page cache.</dd>)^ -** -** [[SQLITE_STATUS_PAGECACHE_SIZE]] ^(<dt>SQLITE_STATUS_PAGECACHE_SIZE</dt> -** <dd>This parameter records the largest memory allocation request -** handed to [pagecache memory allocator]. Only the value returned in the -** *pHighwater parameter to [sqlite3_status()] is of interest. -** The value written into the *pCurrent parameter is undefined.</dd>)^ -** -** [[SQLITE_STATUS_SCRATCH_USED]] <dt>SQLITE_STATUS_SCRATCH_USED</dt> -** <dd>No longer used.</dd> -** -** [[SQLITE_STATUS_SCRATCH_OVERFLOW]] ^(<dt>SQLITE_STATUS_SCRATCH_OVERFLOW</dt> -** <dd>No longer used.</dd> -** -** [[SQLITE_STATUS_SCRATCH_SIZE]] <dt>SQLITE_STATUS_SCRATCH_SIZE</dt> -** <dd>No longer used.</dd> -** -** [[SQLITE_STATUS_PARSER_STACK]] ^(<dt>SQLITE_STATUS_PARSER_STACK</dt> -** <dd>The *pHighwater parameter records the deepest parser stack. -** The *pCurrent value is undefined. The *pHighwater value is only -** meaningful if SQLite is compiled with [YYTRACKMAXSTACKDEPTH].</dd>)^ -** </dl> -** -** New status parameters may be added from time to time. -*/ -enum SQLITE_STATUS_MEMORY_USED = 0; -enum SQLITE_STATUS_PAGECACHE_USED = 1; -enum SQLITE_STATUS_PAGECACHE_OVERFLOW = 2; -enum SQLITE_STATUS_SCRATCH_USED = 3; /* NOT USED */ -enum SQLITE_STATUS_SCRATCH_OVERFLOW = 4; /* NOT USED */ -enum SQLITE_STATUS_MALLOC_SIZE = 5; -enum SQLITE_STATUS_PARSER_STACK = 6; -enum SQLITE_STATUS_PAGECACHE_SIZE = 7; -enum SQLITE_STATUS_SCRATCH_SIZE = 8; /* NOT USED */ -enum SQLITE_STATUS_MALLOC_COUNT = 9; - -/* -** CAPI3REF: Database Connection Status -** METHOD: sqlite3 -** -** ^This interface is used to retrieve runtime status information -** about a single [database connection]. ^The first argument is the -** database connection object to be interrogated. ^The second argument -** is an integer constant, taken from the set of -** [SQLITE_DBSTATUS options], that -** determines the parameter to interrogate. The set of -** [SQLITE_DBSTATUS options] is likely -** to grow in future releases of SQLite. -** -** ^The current value of the requested parameter is written into *pCur -** and the highest instantaneous value is written into *pHiwtr. ^If -** the resetFlg is true, then the highest instantaneous value is -** reset back down to the current value. -** -** ^The sqlite3_db_status() routine returns SQLITE_OK on success and a -** non-zero [error code] on failure. -** -** See also: [sqlite3_status()] and [sqlite3_stmt_status()]. -*/ -int sqlite3_db_status(sqlite3*, int op, int* pCur, int* pHiwtr, int resetFlg); - -/* -** CAPI3REF: Status Parameters for database connections -** KEYWORDS: {SQLITE_DBSTATUS options} -** -** These constants are the available integer "verbs" that can be passed as -** the second argument to the [sqlite3_db_status()] interface. -** -** New verbs may be added in future releases of SQLite. Existing verbs -** might be discontinued. Applications should check the return code from -** [sqlite3_db_status()] to make sure that the call worked. -** The [sqlite3_db_status()] interface will return a non-zero error code -** if a discontinued or unsupported verb is invoked. -** -** <dl> -** [[SQLITE_DBSTATUS_LOOKASIDE_USED]] ^(<dt>SQLITE_DBSTATUS_LOOKASIDE_USED</dt> -** <dd>This parameter returns the number of lookaside memory slots currently -** checked out.</dd>)^ -** -** [[SQLITE_DBSTATUS_LOOKASIDE_HIT]] ^(<dt>SQLITE_DBSTATUS_LOOKASIDE_HIT</dt> -** <dd>This parameter returns the number malloc attempts that were -** satisfied using lookaside memory. Only the high-water value is meaningful; -** the current value is always zero.)^ -** -** [[SQLITE_DBSTATUS_LOOKASIDE_MISS_SIZE]] -** ^(<dt>SQLITE_DBSTATUS_LOOKASIDE_MISS_SIZE</dt> -** <dd>This parameter returns the number malloc attempts that might have -** been satisfied using lookaside memory but failed due to the amount of -** memory requested being larger than the lookaside slot size. -** Only the high-water value is meaningful; -** the current value is always zero.)^ -** -** [[SQLITE_DBSTATUS_LOOKASIDE_MISS_FULL]] -** ^(<dt>SQLITE_DBSTATUS_LOOKASIDE_MISS_FULL</dt> -** <dd>This parameter returns the number malloc attempts that might have -** been satisfied using lookaside memory but failed due to all lookaside -** memory already being in use. -** Only the high-water value is meaningful; -** the current value is always zero.)^ -** -** [[SQLITE_DBSTATUS_CACHE_USED]] ^(<dt>SQLITE_DBSTATUS_CACHE_USED</dt> -** <dd>This parameter returns the approximate number of bytes of heap -** memory used by all pager caches associated with the database connection.)^ -** ^The highwater mark associated with SQLITE_DBSTATUS_CACHE_USED is always 0. -** -** [[SQLITE_DBSTATUS_CACHE_USED_SHARED]] -** ^(<dt>SQLITE_DBSTATUS_CACHE_USED_SHARED</dt> -** <dd>This parameter is similar to DBSTATUS_CACHE_USED, except that if a -** pager cache is shared between two or more connections the bytes of heap -** memory used by that pager cache is divided evenly between the attached -** connections.)^ In other words, if none of the pager caches associated -** with the database connection are shared, this request returns the same -** value as DBSTATUS_CACHE_USED. Or, if one or more or the pager caches are -** shared, the value returned by this call will be smaller than that returned -** by DBSTATUS_CACHE_USED. ^The highwater mark associated with -** SQLITE_DBSTATUS_CACHE_USED_SHARED is always 0. -** -** [[SQLITE_DBSTATUS_SCHEMA_USED]] ^(<dt>SQLITE_DBSTATUS_SCHEMA_USED</dt> -** <dd>This parameter returns the approximate number of bytes of heap -** memory used to store the schema for all databases associated -** with the connection - main, temp, and any [ATTACH]-ed databases.)^ -** ^The full amount of memory used by the schemas is reported, even if the -** schema memory is shared with other database connections due to -** [shared cache mode] being enabled. -** ^The highwater mark associated with SQLITE_DBSTATUS_SCHEMA_USED is always 0. -** -** [[SQLITE_DBSTATUS_STMT_USED]] ^(<dt>SQLITE_DBSTATUS_STMT_USED</dt> -** <dd>This parameter returns the approximate number of bytes of heap -** and lookaside memory used by all prepared statements associated with -** the database connection.)^ -** ^The highwater mark associated with SQLITE_DBSTATUS_STMT_USED is always 0. -** </dd> -** -** [[SQLITE_DBSTATUS_CACHE_HIT]] ^(<dt>SQLITE_DBSTATUS_CACHE_HIT</dt> -** <dd>This parameter returns the number of pager cache hits that have -** occurred.)^ ^The highwater mark associated with SQLITE_DBSTATUS_CACHE_HIT -** is always 0. -** </dd> -** -** [[SQLITE_DBSTATUS_CACHE_MISS]] ^(<dt>SQLITE_DBSTATUS_CACHE_MISS</dt> -** <dd>This parameter returns the number of pager cache misses that have -** occurred.)^ ^The highwater mark associated with SQLITE_DBSTATUS_CACHE_MISS -** is always 0. -** </dd> -** -** [[SQLITE_DBSTATUS_CACHE_WRITE]] ^(<dt>SQLITE_DBSTATUS_CACHE_WRITE</dt> -** <dd>This parameter returns the number of dirty cache entries that have -** been written to disk. Specifically, the number of pages written to the -** wal file in wal mode databases, or the number of pages written to the -** database file in rollback mode databases. Any pages written as part of -** transaction rollback or database recovery operations are not included. -** If an IO or other error occurs while writing a page to disk, the effect -** on subsequent SQLITE_DBSTATUS_CACHE_WRITE requests is undefined.)^ ^The -** highwater mark associated with SQLITE_DBSTATUS_CACHE_WRITE is always 0. -** </dd> -** -** [[SQLITE_DBSTATUS_CACHE_SPILL]] ^(<dt>SQLITE_DBSTATUS_CACHE_SPILL</dt> -** <dd>This parameter returns the number of dirty cache entries that have -** been written to disk in the middle of a transaction due to the page -** cache overflowing. Transactions are more efficient if they are written -** to disk all at once. When pages spill mid-transaction, that introduces -** additional overhead. This parameter can be used help identify -** inefficiencies that can be resolve by increasing the cache size. -** </dd> -** -** [[SQLITE_DBSTATUS_DEFERRED_FKS]] ^(<dt>SQLITE_DBSTATUS_DEFERRED_FKS</dt> -** <dd>This parameter returns zero for the current value if and only if -** all foreign key constraints (deferred or immediate) have been -** resolved.)^ ^The highwater mark is always 0. -** </dd> -** </dl> -*/ -enum SQLITE_DBSTATUS_LOOKASIDE_USED = 0; -enum SQLITE_DBSTATUS_CACHE_USED = 1; -enum SQLITE_DBSTATUS_SCHEMA_USED = 2; -enum SQLITE_DBSTATUS_STMT_USED = 3; -enum SQLITE_DBSTATUS_LOOKASIDE_HIT = 4; -enum SQLITE_DBSTATUS_LOOKASIDE_MISS_SIZE = 5; -enum SQLITE_DBSTATUS_LOOKASIDE_MISS_FULL = 6; -enum SQLITE_DBSTATUS_CACHE_HIT = 7; -enum SQLITE_DBSTATUS_CACHE_MISS = 8; -enum SQLITE_DBSTATUS_CACHE_WRITE = 9; -enum SQLITE_DBSTATUS_DEFERRED_FKS = 10; -enum SQLITE_DBSTATUS_CACHE_USED_SHARED = 11; -enum SQLITE_DBSTATUS_CACHE_SPILL = 12; -enum SQLITE_DBSTATUS_MAX = 12; /* Largest defined DBSTATUS */ - -/* -** CAPI3REF: Prepared Statement Status -** METHOD: sqlite3_stmt -** -** ^(Each prepared statement maintains various -** [SQLITE_STMTSTATUS counters] that measure the number -** of times it has performed specific operations.)^ These counters can -** be used to monitor the performance characteristics of the prepared -** statements. For example, if the number of table steps greatly exceeds -** the number of table searches or result rows, that would tend to indicate -** that the prepared statement is using a full table scan rather than -** an index. -** -** ^(This interface is used to retrieve and reset counter values from -** a [prepared statement]. The first argument is the prepared statement -** object to be interrogated. The second argument -** is an integer code for a specific [SQLITE_STMTSTATUS counter] -** to be interrogated.)^ -** ^The current value of the requested counter is returned. -** ^If the resetFlg is true, then the counter is reset to zero after this -** interface call returns. -** -** See also: [sqlite3_status()] and [sqlite3_db_status()]. -*/ -int sqlite3_stmt_status(sqlite3_stmt*, int op, int resetFlg); - -/* -** CAPI3REF: Status Parameters for prepared statements -** KEYWORDS: {SQLITE_STMTSTATUS counter} {SQLITE_STMTSTATUS counters} -** -** These preprocessor macros define integer codes that name counter -** values associated with the [sqlite3_stmt_status()] interface. -** The meanings of the various counters are as follows: -** -** <dl> -** [[SQLITE_STMTSTATUS_FULLSCAN_STEP]] <dt>SQLITE_STMTSTATUS_FULLSCAN_STEP</dt> -** <dd>^This is the number of times that SQLite has stepped forward in -** a table as part of a full table scan. Large numbers for this counter -** may indicate opportunities for performance improvement through -** careful use of indices.</dd> -** -** [[SQLITE_STMTSTATUS_SORT]] <dt>SQLITE_STMTSTATUS_SORT</dt> -** <dd>^This is the number of sort operations that have occurred. -** A non-zero value in this counter may indicate an opportunity to -** improvement performance through careful use of indices.</dd> -** -** [[SQLITE_STMTSTATUS_AUTOINDEX]] <dt>SQLITE_STMTSTATUS_AUTOINDEX</dt> -** <dd>^This is the number of rows inserted into transient indices that -** were created automatically in order to help joins run faster. -** A non-zero value in this counter may indicate an opportunity to -** improvement performance by adding permanent indices that do not -** need to be reinitialized each time the statement is run.</dd> -** -** [[SQLITE_STMTSTATUS_VM_STEP]] <dt>SQLITE_STMTSTATUS_VM_STEP</dt> -** <dd>^This is the number of virtual machine operations executed -** by the prepared statement if that number is less than or equal -** to 2147483647. The number of virtual machine operations can be -** used as a proxy for the total work done by the prepared statement. -** If the number of virtual machine operations exceeds 2147483647 -** then the value returned by this statement status code is undefined. -** -** [[SQLITE_STMTSTATUS_REPREPARE]] <dt>SQLITE_STMTSTATUS_REPREPARE</dt> -** <dd>^This is the number of times that the prepare statement has been -** automatically regenerated due to schema changes or change to -** [bound parameters] that might affect the query plan. -** -** [[SQLITE_STMTSTATUS_RUN]] <dt>SQLITE_STMTSTATUS_RUN</dt> -** <dd>^This is the number of times that the prepared statement has -** been run. A single "run" for the purposes of this counter is one -** or more calls to [sqlite3_step()] followed by a call to [sqlite3_reset()]. -** The counter is incremented on the first [sqlite3_step()] call of each -** cycle. -** -** [[SQLITE_STMTSTATUS_MEMUSED]] <dt>SQLITE_STMTSTATUS_MEMUSED</dt> -** <dd>^This is the approximate number of bytes of heap memory -** used to store the prepared statement. ^This value is not actually -** a counter, and so the resetFlg parameter to sqlite3_stmt_status() -** is ignored when the opcode is SQLITE_STMTSTATUS_MEMUSED. -** </dd> -** </dl> -*/ -enum SQLITE_STMTSTATUS_FULLSCAN_STEP = 1; -enum SQLITE_STMTSTATUS_SORT = 2; -enum SQLITE_STMTSTATUS_AUTOINDEX = 3; -enum SQLITE_STMTSTATUS_VM_STEP = 4; -enum SQLITE_STMTSTATUS_REPREPARE = 5; -enum SQLITE_STMTSTATUS_RUN = 6; -enum SQLITE_STMTSTATUS_MEMUSED = 99; - -/* -** CAPI3REF: Custom Page Cache Object -** -** The sqlite3_pcache type is opaque. It is implemented by -** the pluggable module. The SQLite core has no knowledge of -** its size or internal structure and never deals with the -** sqlite3_pcache object except by holding and passing pointers -** to the object. -** -** See [sqlite3_pcache_methods2] for additional information. -*/ -struct sqlite3_pcache; - -/* -** CAPI3REF: Custom Page Cache Object -** -** The sqlite3_pcache_page object represents a single page in the -** page cache. The page cache will allocate instances of this -** object. Various methods of the page cache use pointers to instances -** of this object as parameters or as their return value. -** -** See [sqlite3_pcache_methods2] for additional information. -*/ -struct sqlite3_pcache_page -{ - void* pBuf; /* The content of the page */ - void* pExtra; /* Extra information associated with the page */ -} - -/* -** CAPI3REF: Application Defined Page Cache. -** KEYWORDS: {page cache} -** -** ^(The [sqlite3_config]([SQLITE_CONFIG_PCACHE2], ...) interface can -** register an alternative page cache implementation by passing in an -** instance of the sqlite3_pcache_methods2 structure.)^ -** In many applications, most of the heap memory allocated by -** SQLite is used for the page cache. -** By implementing a -** custom page cache using this API, an application can better control -** the amount of memory consumed by SQLite, the way in which -** that memory is allocated and released, and the policies used to -** determine exactly which parts of a database file are cached and for -** how long. -** -** The alternative page cache mechanism is an -** extreme measure that is only needed by the most demanding applications. -** The built-in page cache is recommended for most uses. -** -** ^(The contents of the sqlite3_pcache_methods2 structure are copied to an -** internal buffer by SQLite within the call to [sqlite3_config]. Hence -** the application may discard the parameter after the call to -** [sqlite3_config()] returns.)^ -** -** [[the xInit() page cache method]] -** ^(The xInit() method is called once for each effective -** call to [sqlite3_initialize()])^ -** (usually only once during the lifetime of the process). ^(The xInit() -** method is passed a copy of the sqlite3_pcache_methods2.pArg value.)^ -** The intent of the xInit() method is to set up global data structures -** required by the custom page cache implementation. -** ^(If the xInit() method is NULL, then the -** built-in default page cache is used instead of the application defined -** page cache.)^ -** -** [[the xShutdown() page cache method]] -** ^The xShutdown() method is called by [sqlite3_shutdown()]. -** It can be used to clean up -** any outstanding resources before process shutdown, if required. -** ^The xShutdown() method may be NULL. -** -** ^SQLite automatically serializes calls to the xInit method, -** so the xInit method need not be threadsafe. ^The -** xShutdown method is only called from [sqlite3_shutdown()] so it does -** not need to be threadsafe either. All other methods must be threadsafe -** in multithreaded applications. -** -** ^SQLite will never invoke xInit() more than once without an intervening -** call to xShutdown(). -** -** [[the xCreate() page cache methods]] -** ^SQLite invokes the xCreate() method to construct a new cache instance. -** SQLite will typically create one cache instance for each open database file, -** though this is not guaranteed. ^The -** first parameter, szPage, is the size in bytes of the pages that must -** be allocated by the cache. ^szPage will always a power of two. ^The -** second parameter szExtra is a number of bytes of extra storage -** associated with each page cache entry. ^The szExtra parameter will -** a number less than 250. SQLite will use the -** extra szExtra bytes on each page to store metadata about the underlying -** database page on disk. The value passed into szExtra depends -** on the SQLite version, the target platform, and how SQLite was compiled. -** ^The third argument to xCreate(), bPurgeable, is true if the cache being -** created will be used to cache database pages of a file stored on disk, or -** false if it is used for an in-memory database. The cache implementation -** does not have to do anything special based with the value of bPurgeable; -** it is purely advisory. ^On a cache where bPurgeable is false, SQLite will -** never invoke xUnpin() except to deliberately delete a page. -** ^In other words, calls to xUnpin() on a cache with bPurgeable set to -** false will always have the "discard" flag set to true. -** ^Hence, a cache created with bPurgeable false will -** never contain any unpinned pages. -** -** [[the xCachesize() page cache method]] -** ^(The xCachesize() method may be called at any time by SQLite to set the -** suggested maximum cache-size (number of pages stored by) the cache -** instance passed as the first argument. This is the value configured using -** the SQLite "[PRAGMA cache_size]" command.)^ As with the bPurgeable -** parameter, the implementation is not required to do anything with this -** value; it is advisory only. -** -** [[the xPagecount() page cache methods]] -** The xPagecount() method must return the number of pages currently -** stored in the cache, both pinned and unpinned. -** -** [[the xFetch() page cache methods]] -** The xFetch() method locates a page in the cache and returns a pointer to -** an sqlite3_pcache_page object associated with that page, or a NULL pointer. -** The pBuf element of the returned sqlite3_pcache_page object will be a -** pointer to a buffer of szPage bytes used to store the content of a -** single database page. The pExtra element of sqlite3_pcache_page will be -** a pointer to the szExtra bytes of extra storage that SQLite has requested -** for each entry in the page cache. -** -** The page to be fetched is determined by the key. ^The minimum key value -** is 1. After it has been retrieved using xFetch, the page is considered -** to be "pinned". -** -** If the requested page is already in the page cache, then the page cache -** implementation must return a pointer to the page buffer with its content -** intact. If the requested page is not already in the cache, then the -** cache implementation should use the value of the createFlag -** parameter to help it determined what action to take: -** -** <table border=1 width=85% align=center> -** <tr><th> createFlag <th> Behavior when page is not already in cache -** <tr><td> 0 <td> Do not allocate a new page. Return NULL. -** <tr><td> 1 <td> Allocate a new page if it easy and convenient to do so. -** Otherwise return NULL. -** <tr><td> 2 <td> Make every effort to allocate a new page. Only return -** NULL if allocating a new page is effectively impossible. -** </table> -** -** ^(SQLite will normally invoke xFetch() with a createFlag of 0 or 1. SQLite -** will only use a createFlag of 2 after a prior call with a createFlag of 1 -** failed.)^ In between the to xFetch() calls, SQLite may -** attempt to unpin one or more cache pages by spilling the content of -** pinned pages to disk and synching the operating system disk cache. -** -** [[the xUnpin() page cache method]] -** ^xUnpin() is called by SQLite with a pointer to a currently pinned page -** as its second argument. If the third parameter, discard, is non-zero, -** then the page must be evicted from the cache. -** ^If the discard parameter is -** zero, then the page may be discarded or retained at the discretion of -** page cache implementation. ^The page cache implementation -** may choose to evict unpinned pages at any time. -** -** The cache must not perform any reference counting. A single -** call to xUnpin() unpins the page regardless of the number of prior calls -** to xFetch(). -** -** [[the xRekey() page cache methods]] -** The xRekey() method is used to change the key value associated with the -** page passed as the second argument. If the cache -** previously contains an entry associated with newKey, it must be -** discarded. ^Any prior cache entry associated with newKey is guaranteed not -** to be pinned. -** -** When SQLite calls the xTruncate() method, the cache must discard all -** existing cache entries with page numbers (keys) greater than or equal -** to the value of the iLimit parameter passed to xTruncate(). If any -** of these pages are pinned, they are implicitly unpinned, meaning that -** they can be safely discarded. -** -** [[the xDestroy() page cache method]] -** ^The xDestroy() method is used to delete a cache allocated by xCreate(). -** All resources associated with the specified cache should be freed. ^After -** calling the xDestroy() method, SQLite considers the [sqlite3_pcache*] -** handle invalid, and will not use it with any other sqlite3_pcache_methods2 -** functions. -** -** [[the xShrink() page cache method]] -** ^SQLite invokes the xShrink() method when it wants the page cache to -** free up as much of heap memory as possible. The page cache implementation -** is not obligated to free any memory, but well-behaved implementations should -** do their best. -*/ -struct sqlite3_pcache_methods2 -{ - int iVersion; - void* pArg; - int function(void*) xInit; - void function(void*) xShutdown; - sqlite3_pcache* function(int szPage, int szExtra, int bPurgeable) xCreate; - void function(sqlite3_pcache*, int nCachesize) xCachesize; - int function(sqlite3_pcache*) xPagecount; - sqlite3_pcache_page* function(sqlite3_pcache*, uint key, int createFlag) xFetch; - void function(sqlite3_pcache*, sqlite3_pcache_page*, int discard) xUnpin; - void function(sqlite3_pcache*, sqlite3_pcache_page*, uint oldKey, uint newKey) xRekey; - void function(sqlite3_pcache*, uint iLimit) xTruncate; - void function(sqlite3_pcache*) xDestroy; - void function(sqlite3_pcache*) xShrink; -} - -/* -** This is the obsolete pcache_methods object that has now been replaced -** by sqlite3_pcache_methods2. This object is not used by SQLite. It is -** retained in the header file for backwards compatibility only. -*/ -struct sqlite3_pcache_methods -{ - void* pArg; - int function(void*) xInit; - void function(void*) xShutdown; - sqlite3_pcache* function(int szPage, int bPurgeable) xCreate; - void function(sqlite3_pcache*, int nCachesize) xCachesize; - int function(sqlite3_pcache*) xPagecount; - void* function(sqlite3_pcache*, uint key, int createFlag) xFetch; - void function(sqlite3_pcache*, void*, int discard) xUnpin; - void function(sqlite3_pcache*, void*, uint oldKey, uint newKey) xRekey; - void function(sqlite3_pcache*, uint iLimit) xTruncate; - void function(sqlite3_pcache*) xDestroy; -} - -/* -** CAPI3REF: Online Backup Object -** -** The sqlite3_backup object records state information about an ongoing -** online backup operation. ^The sqlite3_backup object is created by -** a call to [sqlite3_backup_init()] and is destroyed by a call to -** [sqlite3_backup_finish()]. -** -** See Also: [Using the SQLite Online Backup API] -*/ -struct sqlite3_backup; - -/* -** CAPI3REF: Online Backup API. -** -** The backup API copies the content of one database into another. -** It is useful either for creating backups of databases or -** for copying in-memory databases to or from persistent files. -** -** See Also: [Using the SQLite Online Backup API] -** -** ^SQLite holds a write transaction open on the destination database file -** for the duration of the backup operation. -** ^The source database is read-locked only while it is being read; -** it is not locked continuously for the entire backup operation. -** ^Thus, the backup may be performed on a live source database without -** preventing other database connections from -** reading or writing to the source database while the backup is underway. -** -** ^(To perform a backup operation: -** <ol> -** <li><b>sqlite3_backup_init()</b> is called once to initialize the -** backup, -** <li><b>sqlite3_backup_step()</b> is called one or more times to transfer -** the data between the two databases, and finally -** <li><b>sqlite3_backup_finish()</b> is called to release all resources -** associated with the backup operation. -** </ol>)^ -** There should be exactly one call to sqlite3_backup_finish() for each -** successful call to sqlite3_backup_init(). -** -** [[sqlite3_backup_init()]] <b>sqlite3_backup_init()</b> -** -** ^The D and N arguments to sqlite3_backup_init(D,N,S,M) are the -** [database connection] associated with the destination database -** and the database name, respectively. -** ^The database name is "main" for the main database, "temp" for the -** temporary database, or the name specified after the AS keyword in -** an [ATTACH] statement for an attached database. -** ^The S and M arguments passed to -** sqlite3_backup_init(D,N,S,M) identify the [database connection] -** and database name of the source database, respectively. -** ^The source and destination [database connections] (parameters S and D) -** must be different or else sqlite3_backup_init(D,N,S,M) will fail with -** an error. -** -** ^A call to sqlite3_backup_init() will fail, returning NULL, if -** there is already a read or read-write transaction open on the -** destination database. -** -** ^If an error occurs within sqlite3_backup_init(D,N,S,M), then NULL is -** returned and an error code and error message are stored in the -** destination [database connection] D. -** ^The error code and message for the failed call to sqlite3_backup_init() -** can be retrieved using the [sqlite3_errcode()], [sqlite3_errmsg()], and/or -** [sqlite3_errmsg16()] functions. -** ^A successful call to sqlite3_backup_init() returns a pointer to an -** [sqlite3_backup] object. -** ^The [sqlite3_backup] object may be used with the sqlite3_backup_step() and -** sqlite3_backup_finish() functions to perform the specified backup -** operation. -** -** [[sqlite3_backup_step()]] <b>sqlite3_backup_step()</b> -** -** ^Function sqlite3_backup_step(B,N) will copy up to N pages between -** the source and destination databases specified by [sqlite3_backup] object B. -** ^If N is negative, all remaining source pages are copied. -** ^If sqlite3_backup_step(B,N) successfully copies N pages and there -** are still more pages to be copied, then the function returns [SQLITE_OK]. -** ^If sqlite3_backup_step(B,N) successfully finishes copying all pages -** from source to destination, then it returns [SQLITE_DONE]. -** ^If an error occurs while running sqlite3_backup_step(B,N), -** then an [error code] is returned. ^As well as [SQLITE_OK] and -** [SQLITE_DONE], a call to sqlite3_backup_step() may return [SQLITE_READONLY], -** [SQLITE_NOMEM], [SQLITE_BUSY], [SQLITE_LOCKED], or an -** [SQLITE_IOERR_ACCESS | SQLITE_IOERR_XXX] extended error code. -** -** ^(The sqlite3_backup_step() might return [SQLITE_READONLY] if -** <ol> -** <li> the destination database was opened read-only, or -** <li> the destination database is using write-ahead-log journaling -** and the destination and source page sizes differ, or -** <li> the destination database is an in-memory database and the -** destination and source page sizes differ. -** </ol>)^ -** -** ^If sqlite3_backup_step() cannot obtain a required file-system lock, then -** the [sqlite3_busy_handler | busy-handler function] -** is invoked (if one is specified). ^If the -** busy-handler returns non-zero before the lock is available, then -** [SQLITE_BUSY] is returned to the caller. ^In this case the call to -** sqlite3_backup_step() can be retried later. ^If the source -** [database connection] -** is being used to write to the source database when sqlite3_backup_step() -** is called, then [SQLITE_LOCKED] is returned immediately. ^Again, in this -** case the call to sqlite3_backup_step() can be retried later on. ^(If -** [SQLITE_IOERR_ACCESS | SQLITE_IOERR_XXX], [SQLITE_NOMEM], or -** [SQLITE_READONLY] is returned, then -** there is no point in retrying the call to sqlite3_backup_step(). These -** errors are considered fatal.)^ The application must accept -** that the backup operation has failed and pass the backup operation handle -** to the sqlite3_backup_finish() to release associated resources. -** -** ^The first call to sqlite3_backup_step() obtains an exclusive lock -** on the destination file. ^The exclusive lock is not released until either -** sqlite3_backup_finish() is called or the backup operation is complete -** and sqlite3_backup_step() returns [SQLITE_DONE]. ^Every call to -** sqlite3_backup_step() obtains a [shared lock] on the source database that -** lasts for the duration of the sqlite3_backup_step() call. -** ^Because the source database is not locked between calls to -** sqlite3_backup_step(), the source database may be modified mid-way -** through the backup process. ^If the source database is modified by an -** external process or via a database connection other than the one being -** used by the backup operation, then the backup will be automatically -** restarted by the next call to sqlite3_backup_step(). ^If the source -** database is modified by the using the same database connection as is used -** by the backup operation, then the backup database is automatically -** updated at the same time. -** -** [[sqlite3_backup_finish()]] <b>sqlite3_backup_finish()</b> -** -** When sqlite3_backup_step() has returned [SQLITE_DONE], or when the -** application wishes to abandon the backup operation, the application -** should destroy the [sqlite3_backup] by passing it to sqlite3_backup_finish(). -** ^The sqlite3_backup_finish() interfaces releases all -** resources associated with the [sqlite3_backup] object. -** ^If sqlite3_backup_step() has not yet returned [SQLITE_DONE], then any -** active write-transaction on the destination database is rolled back. -** The [sqlite3_backup] object is invalid -** and may not be used following a call to sqlite3_backup_finish(). -** -** ^The value returned by sqlite3_backup_finish is [SQLITE_OK] if no -** sqlite3_backup_step() errors occurred, regardless or whether or not -** sqlite3_backup_step() completed. -** ^If an out-of-memory condition or IO error occurred during any prior -** sqlite3_backup_step() call on the same [sqlite3_backup] object, then -** sqlite3_backup_finish() returns the corresponding [error code]. -** -** ^A return of [SQLITE_BUSY] or [SQLITE_LOCKED] from sqlite3_backup_step() -** is not a permanent error and does not affect the return value of -** sqlite3_backup_finish(). -** -** [[sqlite3_backup_remaining()]] [[sqlite3_backup_pagecount()]] -** <b>sqlite3_backup_remaining() and sqlite3_backup_pagecount()</b> -** -** ^The sqlite3_backup_remaining() routine returns the number of pages still -** to be backed up at the conclusion of the most recent sqlite3_backup_step(). -** ^The sqlite3_backup_pagecount() routine returns the total number of pages -** in the source database at the conclusion of the most recent -** sqlite3_backup_step(). -** ^(The values returned by these functions are only updated by -** sqlite3_backup_step(). If the source database is modified in a way that -** changes the size of the source database or the number of pages remaining, -** those changes are not reflected in the output of sqlite3_backup_pagecount() -** and sqlite3_backup_remaining() until after the next -** sqlite3_backup_step().)^ -** -** <b>Concurrent Usage of Database Handles</b> -** -** ^The source [database connection] may be used by the application for other -** purposes while a backup operation is underway or being initialized. -** ^If SQLite is compiled and configured to support threadsafe database -** connections, then the source database connection may be used concurrently -** from within other threads. -** -** However, the application must guarantee that the destination -** [database connection] is not passed to any other API (by any thread) after -** sqlite3_backup_init() is called and before the corresponding call to -** sqlite3_backup_finish(). SQLite does not currently check to see -** if the application incorrectly accesses the destination [database connection] -** and so no error code is reported, but the operations may malfunction -** nevertheless. Use of the destination database connection while a -** backup is in progress might also also cause a mutex deadlock. -** -** If running in [shared cache mode], the application must -** guarantee that the shared cache used by the destination database -** is not accessed while the backup is running. In practice this means -** that the application must guarantee that the disk file being -** backed up to is not accessed by any connection within the process, -** not just the specific connection that was passed to sqlite3_backup_init(). -** -** The [sqlite3_backup] object itself is partially threadsafe. Multiple -** threads may safely make multiple concurrent calls to sqlite3_backup_step(). -** However, the sqlite3_backup_remaining() and sqlite3_backup_pagecount() -** APIs are not strictly speaking threadsafe. If they are invoked at the -** same time as another thread is invoking sqlite3_backup_step() it is -** possible that they return invalid values. -*/ -/* Destination database handle */ -/* Destination database name */ -/* Source database handle */ -/* Source database name */ -sqlite3_backup* sqlite3_backup_init( - sqlite3* pDest, - const(char)* zDestName, - sqlite3* pSource, - const(char)* zSourceName); -int sqlite3_backup_step(sqlite3_backup* p, int nPage); -int sqlite3_backup_finish(sqlite3_backup* p); -int sqlite3_backup_remaining(sqlite3_backup* p); -int sqlite3_backup_pagecount(sqlite3_backup* p); - -/* -** CAPI3REF: Unlock Notification -** METHOD: sqlite3 -** -** ^When running in shared-cache mode, a database operation may fail with -** an [SQLITE_LOCKED] error if the required locks on the shared-cache or -** individual tables within the shared-cache cannot be obtained. See -** [SQLite Shared-Cache Mode] for a description of shared-cache locking. -** ^This API may be used to register a callback that SQLite will invoke -** when the connection currently holding the required lock relinquishes it. -** ^This API is only available if the library was compiled with the -** [SQLITE_ENABLE_UNLOCK_NOTIFY] C-preprocessor symbol defined. -** -** See Also: [Using the SQLite Unlock Notification Feature]. -** -** ^Shared-cache locks are released when a database connection concludes -** its current transaction, either by committing it or rolling it back. -** -** ^When a connection (known as the blocked connection) fails to obtain a -** shared-cache lock and SQLITE_LOCKED is returned to the caller, the -** identity of the database connection (the blocking connection) that -** has locked the required resource is stored internally. ^After an -** application receives an SQLITE_LOCKED error, it may call the -** sqlite3_unlock_notify() method with the blocked connection handle as -** the first argument to register for a callback that will be invoked -** when the blocking connections current transaction is concluded. ^The -** callback is invoked from within the [sqlite3_step] or [sqlite3_close] -** call that concludes the blocking connections transaction. -** -** ^(If sqlite3_unlock_notify() is called in a multi-threaded application, -** there is a chance that the blocking connection will have already -** concluded its transaction by the time sqlite3_unlock_notify() is invoked. -** If this happens, then the specified callback is invoked immediately, -** from within the call to sqlite3_unlock_notify().)^ -** -** ^If the blocked connection is attempting to obtain a write-lock on a -** shared-cache table, and more than one other connection currently holds -** a read-lock on the same table, then SQLite arbitrarily selects one of -** the other connections to use as the blocking connection. -** -** ^(There may be at most one unlock-notify callback registered by a -** blocked connection. If sqlite3_unlock_notify() is called when the -** blocked connection already has a registered unlock-notify callback, -** then the new callback replaces the old.)^ ^If sqlite3_unlock_notify() is -** called with a NULL pointer as its second argument, then any existing -** unlock-notify callback is canceled. ^The blocked connections -** unlock-notify callback may also be canceled by closing the blocked -** connection using [sqlite3_close()]. -** -** The unlock-notify callback is not reentrant. If an application invokes -** any sqlite3_xxx API functions from within an unlock-notify callback, a -** crash or deadlock may be the result. -** -** ^Unless deadlock is detected (see below), sqlite3_unlock_notify() always -** returns SQLITE_OK. -** -** <b>Callback Invocation Details</b> -** -** When an unlock-notify callback is registered, the application provides a -** single void* pointer that is passed to the callback when it is invoked. -** However, the signature of the callback function allows SQLite to pass -** it an array of void* context pointers. The first argument passed to -** an unlock-notify callback is a pointer to an array of void* pointers, -** and the second is the number of entries in the array. -** -** When a blocking connections transaction is concluded, there may be -** more than one blocked connection that has registered for an unlock-notify -** callback. ^If two or more such blocked connections have specified the -** same callback function, then instead of invoking the callback function -** multiple times, it is invoked once with the set of void* context pointers -** specified by the blocked connections bundled together into an array. -** This gives the application an opportunity to prioritize any actions -** related to the set of unblocked database connections. -** -** <b>Deadlock Detection</b> -** -** Assuming that after registering for an unlock-notify callback a -** database waits for the callback to be issued before taking any further -** action (a reasonable assumption), then using this API may cause the -** application to deadlock. For example, if connection X is waiting for -** connection Y's transaction to be concluded, and similarly connection -** Y is waiting on connection X's transaction, then neither connection -** will proceed and the system may remain deadlocked indefinitely. -** -** To avoid this scenario, the sqlite3_unlock_notify() performs deadlock -** detection. ^If a given call to sqlite3_unlock_notify() would put the -** system in a deadlocked state, then SQLITE_LOCKED is returned and no -** unlock-notify callback is registered. The system is said to be in -** a deadlocked state if connection A has registered for an unlock-notify -** callback on the conclusion of connection B's transaction, and connection -** B has itself registered for an unlock-notify callback when connection -** A's transaction is concluded. ^Indirect deadlock is also detected, so -** the system is also considered to be deadlocked if connection B has -** registered for an unlock-notify callback on the conclusion of connection -** C's transaction, where connection C is waiting on connection A. ^Any -** number of levels of indirection are allowed. -** -** <b>The "DROP TABLE" Exception</b> -** -** When a call to [sqlite3_step()] returns SQLITE_LOCKED, it is almost -** always appropriate to call sqlite3_unlock_notify(). There is however, -** one exception. When executing a "DROP TABLE" or "DROP INDEX" statement, -** SQLite checks if there are any currently executing SELECT statements -** that belong to the same connection. If there are, SQLITE_LOCKED is -** returned. In this case there is no "blocking connection", so invoking -** sqlite3_unlock_notify() results in the unlock-notify callback being -** invoked immediately. If the application then re-attempts the "DROP TABLE" -** or "DROP INDEX" query, an infinite loop might be the result. -** -** One way around this problem is to check the extended error code returned -** by an sqlite3_step() call. ^(If there is a blocking connection, then the -** extended error code is set to SQLITE_LOCKED_SHAREDCACHE. Otherwise, in -** the special "DROP TABLE/INDEX" case, the extended error code is just -** SQLITE_LOCKED.)^ -*/ -/* Waiting connection */ -/* Callback function to invoke */ -/* Argument to pass to xNotify */ -int sqlite3_unlock_notify( - sqlite3* pBlocked, - void function(void** apArg, int nArg) xNotify, - void* pNotifyArg); - -/* -** CAPI3REF: String Comparison -** -** ^The [sqlite3_stricmp()] and [sqlite3_strnicmp()] APIs allow applications -** and extensions to compare the contents of two buffers containing UTF-8 -** strings in a case-independent fashion, using the same definition of "case -** independence" that SQLite uses internally when comparing identifiers. -*/ -int sqlite3_stricmp(const(char)*, const(char)*); -int sqlite3_strnicmp(const(char)*, const(char)*, int); - -/* -** CAPI3REF: String Globbing -* -** ^The [sqlite3_strglob(P,X)] interface returns zero if and only if -** string X matches the [GLOB] pattern P. -** ^The definition of [GLOB] pattern matching used in -** [sqlite3_strglob(P,X)] is the same as for the "X GLOB P" operator in the -** SQL dialect understood by SQLite. ^The [sqlite3_strglob(P,X)] function -** is case sensitive. -** -** Note that this routine returns zero on a match and non-zero if the strings -** do not match, the same as [sqlite3_stricmp()] and [sqlite3_strnicmp()]. -** -** See also: [sqlite3_strlike()]. -*/ -int sqlite3_strglob(const(char)* zGlob, const(char)* zStr); - -/* -** CAPI3REF: String LIKE Matching -* -** ^The [sqlite3_strlike(P,X,E)] interface returns zero if and only if -** string X matches the [LIKE] pattern P with escape character E. -** ^The definition of [LIKE] pattern matching used in -** [sqlite3_strlike(P,X,E)] is the same as for the "X LIKE P ESCAPE E" -** operator in the SQL dialect understood by SQLite. ^For "X LIKE P" without -** the ESCAPE clause, set the E parameter of [sqlite3_strlike(P,X,E)] to 0. -** ^As with the LIKE operator, the [sqlite3_strlike(P,X,E)] function is case -** insensitive - equivalent upper and lower case ASCII characters match -** one another. -** -** ^The [sqlite3_strlike(P,X,E)] function matches Unicode characters, though -** only ASCII characters are case folded. -** -** Note that this routine returns zero on a match and non-zero if the strings -** do not match, the same as [sqlite3_stricmp()] and [sqlite3_strnicmp()]. -** -** See also: [sqlite3_strglob()]. -*/ -int sqlite3_strlike(const(char)* zGlob, const(char)* zStr, uint cEsc); - -/* -** CAPI3REF: Error Logging Interface -** -** ^The [sqlite3_log()] interface writes a message into the [error log] -** established by the [SQLITE_CONFIG_LOG] option to [sqlite3_config()]. -** ^If logging is enabled, the zFormat string and subsequent arguments are -** used with [sqlite3_snprintf()] to generate the final output string. -** -** The sqlite3_log() interface is intended for use by extensions such as -** virtual tables, collating functions, and SQL functions. While there is -** nothing to prevent an application from calling sqlite3_log(), doing so -** is considered bad form. -** -** The zFormat string must not be NULL. -** -** To avoid deadlocks and other threading problems, the sqlite3_log() routine -** will not use dynamically allocated memory. The log message is stored in -** a fixed-length buffer on the stack. If the log message is longer than -** a few hundred characters, it will be truncated to the length of the -** buffer. -*/ -void sqlite3_log(int iErrCode, const(char)* zFormat, ...); - -/* -** CAPI3REF: Write-Ahead Log Commit Hook -** METHOD: sqlite3 -** -** ^The [sqlite3_wal_hook()] function is used to register a callback that -** is invoked each time data is committed to a database in wal mode. -** -** ^(The callback is invoked by SQLite after the commit has taken place and -** the associated write-lock on the database released)^, so the implementation -** may read, write or [checkpoint] the database as required. -** -** ^The first parameter passed to the callback function when it is invoked -** is a copy of the third parameter passed to sqlite3_wal_hook() when -** registering the callback. ^The second is a copy of the database handle. -** ^The third parameter is the name of the database that was written to - -** either "main" or the name of an [ATTACH]-ed database. ^The fourth parameter -** is the number of pages currently in the write-ahead log file, -** including those that were just committed. -** -** The callback function should normally return [SQLITE_OK]. ^If an error -** code is returned, that error will propagate back up through the -** SQLite code base to cause the statement that provoked the callback -** to report an error, though the commit will have still occurred. If the -** callback returns [SQLITE_ROW] or [SQLITE_DONE], or if it returns a value -** that does not correspond to any valid SQLite error code, the results -** are undefined. -** -** A single database handle may have at most a single write-ahead log callback -** registered at one time. ^Calling [sqlite3_wal_hook()] replaces any -** previously registered write-ahead log callback. ^Note that the -** [sqlite3_wal_autocheckpoint()] interface and the -** [wal_autocheckpoint pragma] both invoke [sqlite3_wal_hook()] and will -** overwrite any prior [sqlite3_wal_hook()] settings. -*/ -void* sqlite3_wal_hook( - sqlite3*, - int function(void*, sqlite3*, const(char)*, int), - void*); - -/* -** CAPI3REF: Configure an auto-checkpoint -** METHOD: sqlite3 -** -** ^The [sqlite3_wal_autocheckpoint(D,N)] is a wrapper around -** [sqlite3_wal_hook()] that causes any database on [database connection] D -** to automatically [checkpoint] -** after committing a transaction if there are N or -** more frames in the [write-ahead log] file. ^Passing zero or -** a negative value as the nFrame parameter disables automatic -** checkpoints entirely. -** -** ^The callback registered by this function replaces any existing callback -** registered using [sqlite3_wal_hook()]. ^Likewise, registering a callback -** using [sqlite3_wal_hook()] disables the automatic checkpoint mechanism -** configured by this function. -** -** ^The [wal_autocheckpoint pragma] can be used to invoke this interface -** from SQL. -** -** ^Checkpoints initiated by this mechanism are -** [sqlite3_wal_checkpoint_v2|PASSIVE]. -** -** ^Every new [database connection] defaults to having the auto-checkpoint -** enabled with a threshold of 1000 or [SQLITE_DEFAULT_WAL_AUTOCHECKPOINT] -** pages. The use of this interface -** is only necessary if the default setting is found to be suboptimal -** for a particular application. -*/ -int sqlite3_wal_autocheckpoint(sqlite3* db, int N); - -/* -** CAPI3REF: Checkpoint a database -** METHOD: sqlite3 -** -** ^(The sqlite3_wal_checkpoint(D,X) is equivalent to -** [sqlite3_wal_checkpoint_v2](D,X,[SQLITE_CHECKPOINT_PASSIVE],0,0).)^ -** -** In brief, sqlite3_wal_checkpoint(D,X) causes the content in the -** [write-ahead log] for database X on [database connection] D to be -** transferred into the database file and for the write-ahead log to -** be reset. See the [checkpointing] documentation for addition -** information. -** -** This interface used to be the only way to cause a checkpoint to -** occur. But then the newer and more powerful [sqlite3_wal_checkpoint_v2()] -** interface was added. This interface is retained for backwards -** compatibility and as a convenience for applications that need to manually -** start a callback but which do not need the full power (and corresponding -** complication) of [sqlite3_wal_checkpoint_v2()]. -*/ -int sqlite3_wal_checkpoint(sqlite3* db, const(char)* zDb); - -/* -** CAPI3REF: Checkpoint a database -** METHOD: sqlite3 -** -** ^(The sqlite3_wal_checkpoint_v2(D,X,M,L,C) interface runs a checkpoint -** operation on database X of [database connection] D in mode M. Status -** information is written back into integers pointed to by L and C.)^ -** ^(The M parameter must be a valid [checkpoint mode]:)^ -** -** <dl> -** <dt>SQLITE_CHECKPOINT_PASSIVE<dd> -** ^Checkpoint as many frames as possible without waiting for any database -** readers or writers to finish, then sync the database file if all frames -** in the log were checkpointed. ^The [busy-handler callback] -** is never invoked in the SQLITE_CHECKPOINT_PASSIVE mode. -** ^On the other hand, passive mode might leave the checkpoint unfinished -** if there are concurrent readers or writers. -** -** <dt>SQLITE_CHECKPOINT_FULL<dd> -** ^This mode blocks (it invokes the -** [sqlite3_busy_handler|busy-handler callback]) until there is no -** database writer and all readers are reading from the most recent database -** snapshot. ^It then checkpoints all frames in the log file and syncs the -** database file. ^This mode blocks new database writers while it is pending, -** but new database readers are allowed to continue unimpeded. -** -** <dt>SQLITE_CHECKPOINT_RESTART<dd> -** ^This mode works the same way as SQLITE_CHECKPOINT_FULL with the addition -** that after checkpointing the log file it blocks (calls the -** [busy-handler callback]) -** until all readers are reading from the database file only. ^This ensures -** that the next writer will restart the log file from the beginning. -** ^Like SQLITE_CHECKPOINT_FULL, this mode blocks new -** database writer attempts while it is pending, but does not impede readers. -** -** <dt>SQLITE_CHECKPOINT_TRUNCATE<dd> -** ^This mode works the same way as SQLITE_CHECKPOINT_RESTART with the -** addition that it also truncates the log file to zero bytes just prior -** to a successful return. -** </dl> -** -** ^If pnLog is not NULL, then *pnLog is set to the total number of frames in -** the log file or to -1 if the checkpoint could not run because -** of an error or because the database is not in [WAL mode]. ^If pnCkpt is not -** NULL,then *pnCkpt is set to the total number of checkpointed frames in the -** log file (including any that were already checkpointed before the function -** was called) or to -1 if the checkpoint could not run due to an error or -** because the database is not in WAL mode. ^Note that upon successful -** completion of an SQLITE_CHECKPOINT_TRUNCATE, the log file will have been -** truncated to zero bytes and so both *pnLog and *pnCkpt will be set to zero. -** -** ^All calls obtain an exclusive "checkpoint" lock on the database file. ^If -** any other process is running a checkpoint operation at the same time, the -** lock cannot be obtained and SQLITE_BUSY is returned. ^Even if there is a -** busy-handler configured, it will not be invoked in this case. -** -** ^The SQLITE_CHECKPOINT_FULL, RESTART and TRUNCATE modes also obtain the -** exclusive "writer" lock on the database file. ^If the writer lock cannot be -** obtained immediately, and a busy-handler is configured, it is invoked and -** the writer lock retried until either the busy-handler returns 0 or the lock -** is successfully obtained. ^The busy-handler is also invoked while waiting for -** database readers as described above. ^If the busy-handler returns 0 before -** the writer lock is obtained or while waiting for database readers, the -** checkpoint operation proceeds from that point in the same way as -** SQLITE_CHECKPOINT_PASSIVE - checkpointing as many frames as possible -** without blocking any further. ^SQLITE_BUSY is returned in this case. -** -** ^If parameter zDb is NULL or points to a zero length string, then the -** specified operation is attempted on all WAL databases [attached] to -** [database connection] db. In this case the -** values written to output parameters *pnLog and *pnCkpt are undefined. ^If -** an SQLITE_BUSY error is encountered when processing one or more of the -** attached WAL databases, the operation is still attempted on any remaining -** attached databases and SQLITE_BUSY is returned at the end. ^If any other -** error occurs while processing an attached database, processing is abandoned -** and the error code is returned to the caller immediately. ^If no error -** (SQLITE_BUSY or otherwise) is encountered while processing the attached -** databases, SQLITE_OK is returned. -** -** ^If database zDb is the name of an attached database that is not in WAL -** mode, SQLITE_OK is returned and both *pnLog and *pnCkpt set to -1. ^If -** zDb is not NULL (or a zero length string) and is not the name of any -** attached database, SQLITE_ERROR is returned to the caller. -** -** ^Unless it returns SQLITE_MISUSE, -** the sqlite3_wal_checkpoint_v2() interface -** sets the error information that is queried by -** [sqlite3_errcode()] and [sqlite3_errmsg()]. -** -** ^The [PRAGMA wal_checkpoint] command can be used to invoke this interface -** from SQL. -*/ -/* Database handle */ -/* Name of attached database (or NULL) */ -/* SQLITE_CHECKPOINT_* value */ -/* OUT: Size of WAL log in frames */ -/* OUT: Total number of frames checkpointed */ -int sqlite3_wal_checkpoint_v2( - sqlite3* db, - const(char)* zDb, - int eMode, - int* pnLog, - int* pnCkpt); - -/* -** CAPI3REF: Checkpoint Mode Values -** KEYWORDS: {checkpoint mode} -** -** These constants define all valid values for the "checkpoint mode" passed -** as the third parameter to the [sqlite3_wal_checkpoint_v2()] interface. -** See the [sqlite3_wal_checkpoint_v2()] documentation for details on the -** meaning of each of these checkpoint modes. -*/ -enum SQLITE_CHECKPOINT_PASSIVE = 0; /* Do as much as possible w/o blocking */ -enum SQLITE_CHECKPOINT_FULL = 1; /* Wait for writers, then checkpoint */ -enum SQLITE_CHECKPOINT_RESTART = 2; /* Like FULL but wait for for readers */ -enum SQLITE_CHECKPOINT_TRUNCATE = 3; /* Like RESTART but also truncate WAL */ - -/* -** CAPI3REF: Virtual Table Interface Configuration -** -** This function may be called by either the [xConnect] or [xCreate] method -** of a [virtual table] implementation to configure -** various facets of the virtual table interface. -** -** If this interface is invoked outside the context of an xConnect or -** xCreate virtual table method then the behavior is undefined. -** -** At present, there is only one option that may be configured using -** this function. (See [SQLITE_VTAB_CONSTRAINT_SUPPORT].) Further options -** may be added in the future. -*/ -int sqlite3_vtab_config(sqlite3*, int op, ...); - -/* -** CAPI3REF: Virtual Table Configuration Options -** -** These macros define the various options to the -** [sqlite3_vtab_config()] interface that [virtual table] implementations -** can use to customize and optimize their behavior. -** -** <dl> -** <dt>SQLITE_VTAB_CONSTRAINT_SUPPORT -** <dd>Calls of the form -** [sqlite3_vtab_config](db,SQLITE_VTAB_CONSTRAINT_SUPPORT,X) are supported, -** where X is an integer. If X is zero, then the [virtual table] whose -** [xCreate] or [xConnect] method invoked [sqlite3_vtab_config()] does not -** support constraints. In this configuration (which is the default) if -** a call to the [xUpdate] method returns [SQLITE_CONSTRAINT], then the entire -** statement is rolled back as if [ON CONFLICT | OR ABORT] had been -** specified as part of the users SQL statement, regardless of the actual -** ON CONFLICT mode specified. -** -** If X is non-zero, then the virtual table implementation guarantees -** that if [xUpdate] returns [SQLITE_CONSTRAINT], it will do so before -** any modifications to internal or persistent data structures have been made. -** If the [ON CONFLICT] mode is ABORT, FAIL, IGNORE or ROLLBACK, SQLite -** is able to roll back a statement or database transaction, and abandon -** or continue processing the current SQL statement as appropriate. -** If the ON CONFLICT mode is REPLACE and the [xUpdate] method returns -** [SQLITE_CONSTRAINT], SQLite handles this as if the ON CONFLICT mode -** had been ABORT. -** -** Virtual table implementations that are required to handle OR REPLACE -** must do so within the [xUpdate] method. If a call to the -** [sqlite3_vtab_on_conflict()] function indicates that the current ON -** CONFLICT policy is REPLACE, the virtual table implementation should -** silently replace the appropriate rows within the xUpdate callback and -** return SQLITE_OK. Or, if this is not possible, it may return -** SQLITE_CONSTRAINT, in which case SQLite falls back to OR ABORT -** constraint handling. -** </dl> -*/ -enum SQLITE_VTAB_CONSTRAINT_SUPPORT = 1; - -/* -** CAPI3REF: Determine The Virtual Table Conflict Policy -** -** This function may only be called from within a call to the [xUpdate] method -** of a [virtual table] implementation for an INSERT or UPDATE operation. ^The -** value returned is one of [SQLITE_ROLLBACK], [SQLITE_IGNORE], [SQLITE_FAIL], -** [SQLITE_ABORT], or [SQLITE_REPLACE], according to the [ON CONFLICT] mode -** of the SQL statement that triggered the call to the [xUpdate] method of the -** [virtual table]. -*/ -int sqlite3_vtab_on_conflict(sqlite3*); - -/* -** CAPI3REF: Determine If Virtual Table Column Access Is For UPDATE -** -** If the sqlite3_vtab_nochange(X) routine is called within the [xColumn] -** method of a [virtual table], then it returns true if and only if the -** column is being fetched as part of an UPDATE operation during which the -** column value will not change. Applications might use this to substitute -** a return value that is less expensive to compute and that the corresponding -** [xUpdate] method understands as a "no-change" value. -** -** If the [xColumn] method calls sqlite3_vtab_nochange() and finds that -** the column is not changed by the UPDATE statement, then the xColumn -** method can optionally return without setting a result, without calling -** any of the [sqlite3_result_int|sqlite3_result_xxxxx() interfaces]. -** In that case, [sqlite3_value_nochange(X)] will return true for the -** same column in the [xUpdate] method. -*/ -int sqlite3_vtab_nochange(sqlite3_context*); - -/* -** CAPI3REF: Determine The Collation For a Virtual Table Constraint -** -** This function may only be called from within a call to the [xBestIndex] -** method of a [virtual table]. -** -** The first argument must be the sqlite3_index_info object that is the -** first parameter to the xBestIndex() method. The second argument must be -** an index into the aConstraint[] array belonging to the sqlite3_index_info -** structure passed to xBestIndex. This function returns a pointer to a buffer -** containing the name of the collation sequence for the corresponding -** constraint. -*/ -const(char)* sqlite3_vtab_collation(sqlite3_index_info*, int); - -/* -** CAPI3REF: Conflict resolution modes -** KEYWORDS: {conflict resolution mode} -** -** These constants are returned by [sqlite3_vtab_on_conflict()] to -** inform a [virtual table] implementation what the [ON CONFLICT] mode -** is for the SQL statement being evaluated. -** -** Note that the [SQLITE_IGNORE] constant is also used as a potential -** return value from the [sqlite3_set_authorizer()] callback and that -** [SQLITE_ABORT] is also a [result code]. -*/ -enum SQLITE_ROLLBACK = 1; -/* #define SQLITE_IGNORE 2 // Also used by sqlite3_authorizer() callback */ -enum SQLITE_FAIL = 3; -/* #define SQLITE_ABORT 4 // Also an error code */ -enum SQLITE_REPLACE = 5; - -/* -** CAPI3REF: Prepared Statement Scan Status Opcodes -** KEYWORDS: {scanstatus options} -** -** The following constants can be used for the T parameter to the -** [sqlite3_stmt_scanstatus(S,X,T,V)] interface. Each constant designates a -** different metric for sqlite3_stmt_scanstatus() to return. -** -** When the value returned to V is a string, space to hold that string is -** managed by the prepared statement S and will be automatically freed when -** S is finalized. -** -** <dl> -** [[SQLITE_SCANSTAT_NLOOP]] <dt>SQLITE_SCANSTAT_NLOOP</dt> -** <dd>^The [sqlite3_int64] variable pointed to by the T parameter will be -** set to the total number of times that the X-th loop has run.</dd> -** -** [[SQLITE_SCANSTAT_NVISIT]] <dt>SQLITE_SCANSTAT_NVISIT</dt> -** <dd>^The [sqlite3_int64] variable pointed to by the T parameter will be set -** to the total number of rows examined by all iterations of the X-th loop.</dd> -** -** [[SQLITE_SCANSTAT_EST]] <dt>SQLITE_SCANSTAT_EST</dt> -** <dd>^The "double" variable pointed to by the T parameter will be set to the -** query planner's estimate for the average number of rows output from each -** iteration of the X-th loop. If the query planner's estimates was accurate, -** then this value will approximate the quotient NVISIT/NLOOP and the -** product of this value for all prior loops with the same SELECTID will -** be the NLOOP value for the current loop. -** -** [[SQLITE_SCANSTAT_NAME]] <dt>SQLITE_SCANSTAT_NAME</dt> -** <dd>^The "const char *" variable pointed to by the T parameter will be set -** to a zero-terminated UTF-8 string containing the name of the index or table -** used for the X-th loop. -** -** [[SQLITE_SCANSTAT_EXPLAIN]] <dt>SQLITE_SCANSTAT_EXPLAIN</dt> -** <dd>^The "const char *" variable pointed to by the T parameter will be set -** to a zero-terminated UTF-8 string containing the [EXPLAIN QUERY PLAN] -** description for the X-th loop. -** -** [[SQLITE_SCANSTAT_SELECTID]] <dt>SQLITE_SCANSTAT_SELECT</dt> -** <dd>^The "int" variable pointed to by the T parameter will be set to the -** "select-id" for the X-th loop. The select-id identifies which query or -** subquery the loop is part of. The main query has a select-id of zero. -** The select-id is the same value as is output in the first column -** of an [EXPLAIN QUERY PLAN] query. -** </dl> -*/ -enum SQLITE_SCANSTAT_NLOOP = 0; -enum SQLITE_SCANSTAT_NVISIT = 1; -enum SQLITE_SCANSTAT_EST = 2; -enum SQLITE_SCANSTAT_NAME = 3; -enum SQLITE_SCANSTAT_EXPLAIN = 4; -enum SQLITE_SCANSTAT_SELECTID = 5; - -/* -** CAPI3REF: Prepared Statement Scan Status -** METHOD: sqlite3_stmt -** -** This interface returns information about the predicted and measured -** performance for pStmt. Advanced applications can use this -** interface to compare the predicted and the measured performance and -** issue warnings and/or rerun [ANALYZE] if discrepancies are found. -** -** Since this interface is expected to be rarely used, it is only -** available if SQLite is compiled using the [SQLITE_ENABLE_STMT_SCANSTATUS] -** compile-time option. -** -** The "iScanStatusOp" parameter determines which status information to return. -** The "iScanStatusOp" must be one of the [scanstatus options] or the behavior -** of this interface is undefined. -** ^The requested measurement is written into a variable pointed to by -** the "pOut" parameter. -** Parameter "idx" identifies the specific loop to retrieve statistics for. -** Loops are numbered starting from zero. ^If idx is out of range - less than -** zero or greater than or equal to the total number of loops used to implement -** the statement - a non-zero value is returned and the variable that pOut -** points to is unchanged. -** -** ^Statistics might not be available for all loops in all statements. ^In cases -** where there exist loops with no available statistics, this function behaves -** as if the loop did not exist - it returns non-zero and leave the variable -** that pOut points to unchanged. -** -** See also: [sqlite3_stmt_scanstatus_reset()] -*/ -/* Prepared statement for which info desired */ -/* Index of loop to report on */ -/* Information desired. SQLITE_SCANSTAT_* */ -/* Result written here */ -int sqlite3_stmt_scanstatus( - sqlite3_stmt* pStmt, - int idx, - int iScanStatusOp, - void* pOut); - -/* -** CAPI3REF: Zero Scan-Status Counters -** METHOD: sqlite3_stmt -** -** ^Zero all [sqlite3_stmt_scanstatus()] related event counters. -** -** This API is only available if the library is built with pre-processor -** symbol [SQLITE_ENABLE_STMT_SCANSTATUS] defined. -*/ -void sqlite3_stmt_scanstatus_reset(sqlite3_stmt*); - -/* -** CAPI3REF: Flush caches to disk mid-transaction -** -** ^If a write-transaction is open on [database connection] D when the -** [sqlite3_db_cacheflush(D)] interface invoked, any dirty -** pages in the pager-cache that are not currently in use are written out -** to disk. A dirty page may be in use if a database cursor created by an -** active SQL statement is reading from it, or if it is page 1 of a database -** file (page 1 is always "in use"). ^The [sqlite3_db_cacheflush(D)] -** interface flushes caches for all schemas - "main", "temp", and -** any [attached] databases. -** -** ^If this function needs to obtain extra database locks before dirty pages -** can be flushed to disk, it does so. ^If those locks cannot be obtained -** immediately and there is a busy-handler callback configured, it is invoked -** in the usual manner. ^If the required lock still cannot be obtained, then -** the database is skipped and an attempt made to flush any dirty pages -** belonging to the next (if any) database. ^If any databases are skipped -** because locks cannot be obtained, but no other error occurs, this -** function returns SQLITE_BUSY. -** -** ^If any other error occurs while flushing dirty pages to disk (for -** example an IO error or out-of-memory condition), then processing is -** abandoned and an SQLite [error code] is returned to the caller immediately. -** -** ^Otherwise, if no error occurs, [sqlite3_db_cacheflush()] returns SQLITE_OK. -** -** ^This function does not set the database handle error code or message -** returned by the [sqlite3_errcode()] and [sqlite3_errmsg()] functions. -*/ -int sqlite3_db_cacheflush(sqlite3*); - -/* -** CAPI3REF: The pre-update hook. -** -** ^These interfaces are only available if SQLite is compiled using the -** [SQLITE_ENABLE_PREUPDATE_HOOK] compile-time option. -** -** ^The [sqlite3_preupdate_hook()] interface registers a callback function -** that is invoked prior to each [INSERT], [UPDATE], and [DELETE] operation -** on a database table. -** ^At most one preupdate hook may be registered at a time on a single -** [database connection]; each call to [sqlite3_preupdate_hook()] overrides -** the previous setting. -** ^The preupdate hook is disabled by invoking [sqlite3_preupdate_hook()] -** with a NULL pointer as the second parameter. -** ^The third parameter to [sqlite3_preupdate_hook()] is passed through as -** the first parameter to callbacks. -** -** ^The preupdate hook only fires for changes to real database tables; the -** preupdate hook is not invoked for changes to [virtual tables] or to -** system tables like sqlite_master or sqlite_stat1. -** -** ^The second parameter to the preupdate callback is a pointer to -** the [database connection] that registered the preupdate hook. -** ^The third parameter to the preupdate callback is one of the constants -** [SQLITE_INSERT], [SQLITE_DELETE], or [SQLITE_UPDATE] to identify the -** kind of update operation that is about to occur. -** ^(The fourth parameter to the preupdate callback is the name of the -** database within the database connection that is being modified. This -** will be "main" for the main database or "temp" for TEMP tables or -** the name given after the AS keyword in the [ATTACH] statement for attached -** databases.)^ -** ^The fifth parameter to the preupdate callback is the name of the -** table that is being modified. -** -** For an UPDATE or DELETE operation on a [rowid table], the sixth -** parameter passed to the preupdate callback is the initial [rowid] of the -** row being modified or deleted. For an INSERT operation on a rowid table, -** or any operation on a WITHOUT ROWID table, the value of the sixth -** parameter is undefined. For an INSERT or UPDATE on a rowid table the -** seventh parameter is the final rowid value of the row being inserted -** or updated. The value of the seventh parameter passed to the callback -** function is not defined for operations on WITHOUT ROWID tables, or for -** INSERT operations on rowid tables. -** -** The [sqlite3_preupdate_old()], [sqlite3_preupdate_new()], -** [sqlite3_preupdate_count()], and [sqlite3_preupdate_depth()] interfaces -** provide additional information about a preupdate event. These routines -** may only be called from within a preupdate callback. Invoking any of -** these routines from outside of a preupdate callback or with a -** [database connection] pointer that is different from the one supplied -** to the preupdate callback results in undefined and probably undesirable -** behavior. -** -** ^The [sqlite3_preupdate_count(D)] interface returns the number of columns -** in the row that is being inserted, updated, or deleted. -** -** ^The [sqlite3_preupdate_old(D,N,P)] interface writes into P a pointer to -** a [protected sqlite3_value] that contains the value of the Nth column of -** the table row before it is updated. The N parameter must be between 0 -** and one less than the number of columns or the behavior will be -** undefined. This must only be used within SQLITE_UPDATE and SQLITE_DELETE -** preupdate callbacks; if it is used by an SQLITE_INSERT callback then the -** behavior is undefined. The [sqlite3_value] that P points to -** will be destroyed when the preupdate callback returns. -** -** ^The [sqlite3_preupdate_new(D,N,P)] interface writes into P a pointer to -** a [protected sqlite3_value] that contains the value of the Nth column of -** the table row after it is updated. The N parameter must be between 0 -** and one less than the number of columns or the behavior will be -** undefined. This must only be used within SQLITE_INSERT and SQLITE_UPDATE -** preupdate callbacks; if it is used by an SQLITE_DELETE callback then the -** behavior is undefined. The [sqlite3_value] that P points to -** will be destroyed when the preupdate callback returns. -** -** ^The [sqlite3_preupdate_depth(D)] interface returns 0 if the preupdate -** callback was invoked as a result of a direct insert, update, or delete -** operation; or 1 for inserts, updates, or deletes invoked by top-level -** triggers; or 2 for changes resulting from triggers called by top-level -** triggers; and so forth. -** -** See also: [sqlite3_update_hook()] -*/ - -/* Copy of third arg to preupdate_hook() */ -/* Database handle */ -/* SQLITE_UPDATE, DELETE or INSERT */ -/* Database name */ -/* Table name */ -/* Rowid of row about to be deleted/updated */ -/* New rowid value (for a rowid UPDATE) */ - -/* -** CAPI3REF: Low-level system error code -** -** ^Attempt to return the underlying operating system error code or error -** number that caused the most recent I/O error or failure to open a file. -** The return value is OS-dependent. For example, on unix systems, after -** [sqlite3_open_v2()] returns [SQLITE_CANTOPEN], this interface could be -** called to get back the underlying "errno" that caused the problem, such -** as ENOSPC, EAUTH, EISDIR, and so forth. -*/ -int sqlite3_system_errno(sqlite3*); - -/* -** CAPI3REF: Database Snapshot -** KEYWORDS: {snapshot} {sqlite3_snapshot} -** -** An instance of the snapshot object records the state of a [WAL mode] -** database for some specific point in history. -** -** In [WAL mode], multiple [database connections] that are open on the -** same database file can each be reading a different historical version -** of the database file. When a [database connection] begins a read -** transaction, that connection sees an unchanging copy of the database -** as it existed for the point in time when the transaction first started. -** Subsequent changes to the database from other connections are not seen -** by the reader until a new read transaction is started. -** -** The sqlite3_snapshot object records state information about an historical -** version of the database file so that it is possible to later open a new read -** transaction that sees that historical version of the database rather than -** the most recent version. -*/ -struct sqlite3_snapshot -{ - ubyte[48] hidden; -} - -/* -** CAPI3REF: Record A Database Snapshot -** CONSTRUCTOR: sqlite3_snapshot -** -** ^The [sqlite3_snapshot_get(D,S,P)] interface attempts to make a -** new [sqlite3_snapshot] object that records the current state of -** schema S in database connection D. ^On success, the -** [sqlite3_snapshot_get(D,S,P)] interface writes a pointer to the newly -** created [sqlite3_snapshot] object into *P and returns SQLITE_OK. -** If there is not already a read-transaction open on schema S when -** this function is called, one is opened automatically. -** -** The following must be true for this function to succeed. If any of -** the following statements are false when sqlite3_snapshot_get() is -** called, SQLITE_ERROR is returned. The final value of *P is undefined -** in this case. -** -** <ul> -** <li> The database handle must not be in [autocommit mode]. -** -** <li> Schema S of [database connection] D must be a [WAL mode] database. -** -** <li> There must not be a write transaction open on schema S of database -** connection D. -** -** <li> One or more transactions must have been written to the current wal -** file since it was created on disk (by any connection). This means -** that a snapshot cannot be taken on a wal mode database with no wal -** file immediately after it is first opened. At least one transaction -** must be written to it first. -** </ul> -** -** This function may also return SQLITE_NOMEM. If it is called with the -** database handle in autocommit mode but fails for some other reason, -** whether or not a read transaction is opened on schema S is undefined. -** -** The [sqlite3_snapshot] object returned from a successful call to -** [sqlite3_snapshot_get()] must be freed using [sqlite3_snapshot_free()] -** to avoid a memory leak. -** -** The [sqlite3_snapshot_get()] interface is only available when the -** [SQLITE_ENABLE_SNAPSHOT] compile-time option is used. -*/ -int sqlite3_snapshot_get( - sqlite3* db, - const(char)* zSchema, - sqlite3_snapshot** ppSnapshot); - -/* -** CAPI3REF: Start a read transaction on an historical snapshot -** METHOD: sqlite3_snapshot -** -** ^The [sqlite3_snapshot_open(D,S,P)] interface either starts a new read -** transaction or upgrades an existing one for schema S of -** [database connection] D such that the read transaction refers to -** historical [snapshot] P, rather than the most recent change to the -** database. ^The [sqlite3_snapshot_open()] interface returns SQLITE_OK -** on success or an appropriate [error code] if it fails. -** -** ^In order to succeed, the database connection must not be in -** [autocommit mode] when [sqlite3_snapshot_open(D,S,P)] is called. If there -** is already a read transaction open on schema S, then the database handle -** must have no active statements (SELECT statements that have been passed -** to sqlite3_step() but not sqlite3_reset() or sqlite3_finalize()). -** SQLITE_ERROR is returned if either of these conditions is violated, or -** if schema S does not exist, or if the snapshot object is invalid. -** -** ^A call to sqlite3_snapshot_open() will fail to open if the specified -** snapshot has been overwritten by a [checkpoint]. In this case -** SQLITE_ERROR_SNAPSHOT is returned. -** -** If there is already a read transaction open when this function is -** invoked, then the same read transaction remains open (on the same -** database snapshot) if SQLITE_ERROR, SQLITE_BUSY or SQLITE_ERROR_SNAPSHOT -** is returned. If another error code - for example SQLITE_PROTOCOL or an -** SQLITE_IOERR error code - is returned, then the final state of the -** read transaction is undefined. If SQLITE_OK is returned, then the -** read transaction is now open on database snapshot P. -** -** ^(A call to [sqlite3_snapshot_open(D,S,P)] will fail if the -** database connection D does not know that the database file for -** schema S is in [WAL mode]. A database connection might not know -** that the database file is in [WAL mode] if there has been no prior -** I/O on that database connection, or if the database entered [WAL mode] -** after the most recent I/O on the database connection.)^ -** (Hint: Run "[PRAGMA application_id]" against a newly opened -** database connection in order to make it ready to use snapshots.) -** -** The [sqlite3_snapshot_open()] interface is only available when the -** [SQLITE_ENABLE_SNAPSHOT] compile-time option is used. -*/ -int sqlite3_snapshot_open( - sqlite3* db, - const(char)* zSchema, - sqlite3_snapshot* pSnapshot); - -/* -** CAPI3REF: Destroy a snapshot -** DESTRUCTOR: sqlite3_snapshot -** -** ^The [sqlite3_snapshot_free(P)] interface destroys [sqlite3_snapshot] P. -** The application must eventually free every [sqlite3_snapshot] object -** using this routine to avoid a memory leak. -** -** The [sqlite3_snapshot_free()] interface is only available when the -** [SQLITE_ENABLE_SNAPSHOT] compile-time option is used. -*/ -void sqlite3_snapshot_free(sqlite3_snapshot*); - -/* -** CAPI3REF: Compare the ages of two snapshot handles. -** METHOD: sqlite3_snapshot -** -** The sqlite3_snapshot_cmp(P1, P2) interface is used to compare the ages -** of two valid snapshot handles. -** -** If the two snapshot handles are not associated with the same database -** file, the result of the comparison is undefined. -** -** Additionally, the result of the comparison is only valid if both of the -** snapshot handles were obtained by calling sqlite3_snapshot_get() since the -** last time the wal file was deleted. The wal file is deleted when the -** database is changed back to rollback mode or when the number of database -** clients drops to zero. If either snapshot handle was obtained before the -** wal file was last deleted, the value returned by this function -** is undefined. -** -** Otherwise, this API returns a negative value if P1 refers to an older -** snapshot than P2, zero if the two handles refer to the same database -** snapshot, and a positive value if P1 is a newer snapshot than P2. -** -** This interface is only available if SQLite is compiled with the -** [SQLITE_ENABLE_SNAPSHOT] option. -*/ -int sqlite3_snapshot_cmp(sqlite3_snapshot* p1, sqlite3_snapshot* p2); - -/* -** CAPI3REF: Recover snapshots from a wal file -** METHOD: sqlite3_snapshot -** -** If a [WAL file] remains on disk after all database connections close -** (either through the use of the [SQLITE_FCNTL_PERSIST_WAL] [file control] -** or because the last process to have the database opened exited without -** calling [sqlite3_close()]) and a new connection is subsequently opened -** on that database and [WAL file], the [sqlite3_snapshot_open()] interface -** will only be able to open the last transaction added to the WAL file -** even though the WAL file contains other valid transactions. -** -** This function attempts to scan the WAL file associated with database zDb -** of database handle db and make all valid snapshots available to -** sqlite3_snapshot_open(). It is an error if there is already a read -** transaction open on the database, or if the database is not a WAL mode -** database. -** -** SQLITE_OK is returned if successful, or an SQLite error code otherwise. -** -** This interface is only available if SQLite is compiled with the -** [SQLITE_ENABLE_SNAPSHOT] option. -*/ -int sqlite3_snapshot_recover(sqlite3* db, const(char)* zDb); - -/* -** CAPI3REF: Serialize a database -** -** The sqlite3_serialize(D,S,P,F) interface returns a pointer to memory -** that is a serialization of the S database on [database connection] D. -** If P is not a NULL pointer, then the size of the database in bytes -** is written into *P. -** -** For an ordinary on-disk database file, the serialization is just a -** copy of the disk file. For an in-memory database or a "TEMP" database, -** the serialization is the same sequence of bytes which would be written -** to disk if that database where backed up to disk. -** -** The usual case is that sqlite3_serialize() copies the serialization of -** the database into memory obtained from [sqlite3_malloc64()] and returns -** a pointer to that memory. The caller is responsible for freeing the -** returned value to avoid a memory leak. However, if the F argument -** contains the SQLITE_SERIALIZE_NOCOPY bit, then no memory allocations -** are made, and the sqlite3_serialize() function will return a pointer -** to the contiguous memory representation of the database that SQLite -** is currently using for that database, or NULL if the no such contiguous -** memory representation of the database exists. A contiguous memory -** representation of the database will usually only exist if there has -** been a prior call to [sqlite3_deserialize(D,S,...)] with the same -** values of D and S. -** The size of the database is written into *P even if the -** SQLITE_SERIALIZE_NOCOPY bit is set but no contiguous copy -** of the database exists. -** -** A call to sqlite3_serialize(D,S,P,F) might return NULL even if the -** SQLITE_SERIALIZE_NOCOPY bit is omitted from argument F if a memory -** allocation error occurs. -** -** This interface is only available if SQLite is compiled with the -** [SQLITE_ENABLE_DESERIALIZE] option. -*/ -/* The database connection */ -/* Which DB to serialize. ex: "main", "temp", ... */ -/* Write size of the DB here, if not NULL */ -/* Zero or more SQLITE_SERIALIZE_* flags */ -ubyte* sqlite3_serialize( - sqlite3* db, - const(char)* zSchema, - sqlite3_int64* piSize, - uint mFlags); - -/* -** CAPI3REF: Flags for sqlite3_serialize -** -** Zero or more of the following constants can be OR-ed together for -** the F argument to [sqlite3_serialize(D,S,P,F)]. -** -** SQLITE_SERIALIZE_NOCOPY means that [sqlite3_serialize()] will return -** a pointer to contiguous in-memory database that it is currently using, -** without making a copy of the database. If SQLite is not currently using -** a contiguous in-memory database, then this option causes -** [sqlite3_serialize()] to return a NULL pointer. SQLite will only be -** using a contiguous in-memory database if it has been initialized by a -** prior call to [sqlite3_deserialize()]. -*/ -enum SQLITE_SERIALIZE_NOCOPY = 0x001; /* Do no memory allocations */ - -/* -** CAPI3REF: Deserialize a database -** -** The sqlite3_deserialize(D,S,P,N,M,F) interface causes the -** [database connection] D to disconnect from database S and then -** reopen S as an in-memory database based on the serialization contained -** in P. The serialized database P is N bytes in size. M is the size of -** the buffer P, which might be larger than N. If M is larger than N, and -** the SQLITE_DESERIALIZE_READONLY bit is not set in F, then SQLite is -** permitted to add content to the in-memory database as long as the total -** size does not exceed M bytes. -** -** If the SQLITE_DESERIALIZE_FREEONCLOSE bit is set in F, then SQLite will -** invoke sqlite3_free() on the serialization buffer when the database -** connection closes. If the SQLITE_DESERIALIZE_RESIZEABLE bit is set, then -** SQLite will try to increase the buffer size using sqlite3_realloc64() -** if writes on the database cause it to grow larger than M bytes. -** -** The sqlite3_deserialize() interface will fail with SQLITE_BUSY if the -** database is currently in a read transaction or is involved in a backup -** operation. -** -** If sqlite3_deserialize(D,S,P,N,M,F) fails for any reason and if the -** SQLITE_DESERIALIZE_FREEONCLOSE bit is set in argument F, then -** [sqlite3_free()] is invoked on argument P prior to returning. -** -** This interface is only available if SQLite is compiled with the -** [SQLITE_ENABLE_DESERIALIZE] option. -*/ -/* The database connection */ -/* Which DB to reopen with the deserialization */ -/* The serialized database content */ -/* Number bytes in the deserialization */ -/* Total size of buffer pData[] */ -/* Zero or more SQLITE_DESERIALIZE_* flags */ -int sqlite3_deserialize( - sqlite3* db, - const(char)* zSchema, - ubyte* pData, - sqlite3_int64 szDb, - sqlite3_int64 szBuf, - uint mFlags); - -/* -** CAPI3REF: Flags for sqlite3_deserialize() -** -** The following are allowed values for 6th argument (the F argument) to -** the [sqlite3_deserialize(D,S,P,N,M,F)] interface. -** -** The SQLITE_DESERIALIZE_FREEONCLOSE means that the database serialization -** in the P argument is held in memory obtained from [sqlite3_malloc64()] -** and that SQLite should take ownership of this memory and automatically -** free it when it has finished using it. Without this flag, the caller -** is responsible for freeing any dynamically allocated memory. -** -** The SQLITE_DESERIALIZE_RESIZEABLE flag means that SQLite is allowed to -** grow the size of the database using calls to [sqlite3_realloc64()]. This -** flag should only be used if SQLITE_DESERIALIZE_FREEONCLOSE is also used. -** Without this flag, the deserialized database cannot increase in size beyond -** the number of bytes specified by the M parameter. -** -** The SQLITE_DESERIALIZE_READONLY flag means that the deserialized database -** should be treated as read-only. -*/ -enum SQLITE_DESERIALIZE_FREEONCLOSE = 1; /* Call sqlite3_free() on close */ -enum SQLITE_DESERIALIZE_RESIZEABLE = 2; /* Resize using sqlite3_realloc64() */ -enum SQLITE_DESERIALIZE_READONLY = 4; /* Database is read-only */ - -/* -** Undo the hack that converts floating point types to integer for -** builds on processors without floating point support. -*/ - -/* End of the 'extern "C"' block */ - -/* SQLITE3_H */ - -/******** Begin file sqlite3rtree.h *********/ -/* -** 2010 August 30 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: -** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. -** -************************************************************************* -*/ - -/* The double-precision datatype used by RTree depends on the -** SQLITE_RTREE_INT_ONLY compile-time option. -*/ - -alias sqlite3_rtree_dbl = double; - -/* -** Register a geometry callback named zGeom that can be used as part of an -** R-Tree geometry query as follows: -** -** SELECT ... FROM <rtree> WHERE <rtree col> MATCH $zGeom(... params ...) -*/ -int sqlite3_rtree_geometry_callback( - sqlite3* db, - const(char)* zGeom, - int function(sqlite3_rtree_geometry*, int, sqlite3_rtree_dbl*, int*) xGeom, - void* pContext); - -/* -** A pointer to a structure of the following type is passed as the first -** argument to callbacks registered using rtree_geometry_callback(). -*/ -struct sqlite3_rtree_geometry -{ - void* pContext; /* Copy of pContext passed to s_r_g_c() */ - int nParam; /* Size of array aParam[] */ - sqlite3_rtree_dbl* aParam; /* Parameters passed to SQL geom function */ - void* pUser; /* Callback implementation user data */ - void function(void*) xDelUser; /* Called by SQLite to clean up pUser */ -} - -/* -** Register a 2nd-generation geometry callback named zScore that can be -** used as part of an R-Tree geometry query as follows: -** -** SELECT ... FROM <rtree> WHERE <rtree col> MATCH $zQueryFunc(... params ...) -*/ -int sqlite3_rtree_query_callback( - sqlite3* db, - const(char)* zQueryFunc, - int function(sqlite3_rtree_query_info*) xQueryFunc, - void* pContext, - void function(void*) xDestructor); - -/* -** A pointer to a structure of the following type is passed as the -** argument to scored geometry callback registered using -** sqlite3_rtree_query_callback(). -** -** Note that the first 5 fields of this structure are identical to -** sqlite3_rtree_geometry. This structure is a subclass of -** sqlite3_rtree_geometry. -*/ -struct sqlite3_rtree_query_info -{ - void* pContext; /* pContext from when function registered */ - int nParam; /* Number of function parameters */ - sqlite3_rtree_dbl* aParam; /* value of function parameters */ - void* pUser; /* callback can use this, if desired */ - void function(void*) xDelUser; /* function to free pUser */ - sqlite3_rtree_dbl* aCoord; /* Coordinates of node or entry to check */ - uint* anQueue; /* Number of pending entries in the queue */ - int nCoord; /* Number of coordinates */ - int iLevel; /* Level of current node or entry */ - int mxLevel; /* The largest iLevel value in the tree */ - sqlite3_int64 iRowid; /* Rowid for current entry */ - sqlite3_rtree_dbl rParentScore; /* Score of parent node */ - int eParentWithin; /* Visibility of parent node */ - int eWithin; /* OUT: Visiblity */ - sqlite3_rtree_dbl rScore; /* OUT: Write the score here */ - /* The following fields are only available in 3.8.11 and later */ - sqlite3_value** apSqlParam; /* Original SQL values of parameters */ -} - -/* -** Allowed values for sqlite3_rtree_query.eWithin and .eParentWithin. -*/ -enum NOT_WITHIN = 0; /* Object completely outside of query region */ -enum PARTLY_WITHIN = 1; /* Object partially overlaps query region */ -enum FULLY_WITHIN = 2; /* Object fully contained within query region */ - -/* end of the 'extern "C"' block */ - -/* ifndef _SQLITE3RTREE_H_ */ - -/******** End of sqlite3rtree.h *********/ -/******** Begin file sqlite3session.h *********/ - -/* -** Make sure we can call this stuff from C++. -*/ - -/* -** CAPI3REF: Session Object Handle -** -** An instance of this object is a [session] that can be used to -** record changes to a database. -*/ - -/* -** CAPI3REF: Changeset Iterator Handle -** -** An instance of this object acts as a cursor for iterating -** over the elements of a [changeset] or [patchset]. -*/ - -/* -** CAPI3REF: Create A New Session Object -** CONSTRUCTOR: sqlite3_session -** -** Create a new session object attached to database handle db. If successful, -** a pointer to the new object is written to *ppSession and SQLITE_OK is -** returned. If an error occurs, *ppSession is set to NULL and an SQLite -** error code (e.g. SQLITE_NOMEM) is returned. -** -** It is possible to create multiple session objects attached to a single -** database handle. -** -** Session objects created using this function should be deleted using the -** [sqlite3session_delete()] function before the database handle that they -** are attached to is itself closed. If the database handle is closed before -** the session object is deleted, then the results of calling any session -** module function, including [sqlite3session_delete()] on the session object -** are undefined. -** -** Because the session module uses the [sqlite3_preupdate_hook()] API, it -** is not possible for an application to register a pre-update hook on a -** database handle that has one or more session objects attached. Nor is -** it possible to create a session object attached to a database handle for -** which a pre-update hook is already defined. The results of attempting -** either of these things are undefined. -** -** The session object will be used to create changesets for tables in -** database zDb, where zDb is either "main", or "temp", or the name of an -** attached database. It is not an error if database zDb is not attached -** to the database when the session object is created. -*/ - -/* Database handle */ -/* Name of db (e.g. "main") */ -/* OUT: New session object */ - -/* -** CAPI3REF: Delete A Session Object -** DESTRUCTOR: sqlite3_session -** -** Delete a session object previously allocated using -** [sqlite3session_create()]. Once a session object has been deleted, the -** results of attempting to use pSession with any other session module -** function are undefined. -** -** Session objects must be deleted before the database handle to which they -** are attached is closed. Refer to the documentation for -** [sqlite3session_create()] for details. -*/ - -/* -** CAPI3REF: Enable Or Disable A Session Object -** METHOD: sqlite3_session -** -** Enable or disable the recording of changes by a session object. When -** enabled, a session object records changes made to the database. When -** disabled - it does not. A newly created session object is enabled. -** Refer to the documentation for [sqlite3session_changeset()] for further -** details regarding how enabling and disabling a session object affects -** the eventual changesets. -** -** Passing zero to this function disables the session. Passing a value -** greater than zero enables it. Passing a value less than zero is a -** no-op, and may be used to query the current state of the session. -** -** The return value indicates the final state of the session object: 0 if -** the session is disabled, or 1 if it is enabled. -*/ - -/* -** CAPI3REF: Set Or Clear the Indirect Change Flag -** METHOD: sqlite3_session -** -** Each change recorded by a session object is marked as either direct or -** indirect. A change is marked as indirect if either: -** -** <ul> -** <li> The session object "indirect" flag is set when the change is -** made, or -** <li> The change is made by an SQL trigger or foreign key action -** instead of directly as a result of a users SQL statement. -** </ul> -** -** If a single row is affected by more than one operation within a session, -** then the change is considered indirect if all operations meet the criteria -** for an indirect change above, or direct otherwise. -** -** This function is used to set, clear or query the session object indirect -** flag. If the second argument passed to this function is zero, then the -** indirect flag is cleared. If it is greater than zero, the indirect flag -** is set. Passing a value less than zero does not modify the current value -** of the indirect flag, and may be used to query the current state of the -** indirect flag for the specified session object. -** -** The return value indicates the final state of the indirect flag: 0 if -** it is clear, or 1 if it is set. -*/ - -/* -** CAPI3REF: Attach A Table To A Session Object -** METHOD: sqlite3_session -** -** If argument zTab is not NULL, then it is the name of a table to attach -** to the session object passed as the first argument. All subsequent changes -** made to the table while the session object is enabled will be recorded. See -** documentation for [sqlite3session_changeset()] for further details. -** -** Or, if argument zTab is NULL, then changes are recorded for all tables -** in the database. If additional tables are added to the database (by -** executing "CREATE TABLE" statements) after this call is made, changes for -** the new tables are also recorded. -** -** Changes can only be recorded for tables that have a PRIMARY KEY explicitly -** defined as part of their CREATE TABLE statement. It does not matter if the -** PRIMARY KEY is an "INTEGER PRIMARY KEY" (rowid alias) or not. The PRIMARY -** KEY may consist of a single column, or may be a composite key. -** -** It is not an error if the named table does not exist in the database. Nor -** is it an error if the named table does not have a PRIMARY KEY. However, -** no changes will be recorded in either of these scenarios. -** -** Changes are not recorded for individual rows that have NULL values stored -** in one or more of their PRIMARY KEY columns. -** -** SQLITE_OK is returned if the call completes without error. Or, if an error -** occurs, an SQLite error code (e.g. SQLITE_NOMEM) is returned. -** -** <h3>Special sqlite_stat1 Handling</h3> -** -** As of SQLite version 3.22.0, the "sqlite_stat1" table is an exception to -** some of the rules above. In SQLite, the schema of sqlite_stat1 is: -** <pre> -** CREATE TABLE sqlite_stat1(tbl,idx,stat) -** </pre> -** -** Even though sqlite_stat1 does not have a PRIMARY KEY, changes are -** recorded for it as if the PRIMARY KEY is (tbl,idx). Additionally, changes -** are recorded for rows for which (idx IS NULL) is true. However, for such -** rows a zero-length blob (SQL value X'') is stored in the changeset or -** patchset instead of a NULL value. This allows such changesets to be -** manipulated by legacy implementations of sqlite3changeset_invert(), -** concat() and similar. -** -** The sqlite3changeset_apply() function automatically converts the -** zero-length blob back to a NULL value when updating the sqlite_stat1 -** table. However, if the application calls sqlite3changeset_new(), -** sqlite3changeset_old() or sqlite3changeset_conflict on a changeset -** iterator directly (including on a changeset iterator passed to a -** conflict-handler callback) then the X'' value is returned. The application -** must translate X'' to NULL itself if required. -** -** Legacy (older than 3.22.0) versions of the sessions module cannot capture -** changes made to the sqlite_stat1 table. Legacy versions of the -** sqlite3changeset_apply() function silently ignore any modifications to the -** sqlite_stat1 table that are part of a changeset or patchset. -*/ - -/* Session object */ -/* Table name */ - -/* -** CAPI3REF: Set a table filter on a Session Object. -** METHOD: sqlite3_session -** -** The second argument (xFilter) is the "filter callback". For changes to rows -** in tables that are not attached to the Session object, the filter is called -** to determine whether changes to the table's rows should be tracked or not. -** If xFilter returns 0, changes is not tracked. Note that once a table is -** attached, xFilter will not be called again. -*/ - -/* Session object */ - -/* Copy of third arg to _filter_table() */ -/* Table name */ - -/* First argument passed to xFilter */ - -/* -** CAPI3REF: Generate A Changeset From A Session Object -** METHOD: sqlite3_session -** -** Obtain a changeset containing changes to the tables attached to the -** session object passed as the first argument. If successful, -** set *ppChangeset to point to a buffer containing the changeset -** and *pnChangeset to the size of the changeset in bytes before returning -** SQLITE_OK. If an error occurs, set both *ppChangeset and *pnChangeset to -** zero and return an SQLite error code. -** -** A changeset consists of zero or more INSERT, UPDATE and/or DELETE changes, -** each representing a change to a single row of an attached table. An INSERT -** change contains the values of each field of a new database row. A DELETE -** contains the original values of each field of a deleted database row. An -** UPDATE change contains the original values of each field of an updated -** database row along with the updated values for each updated non-primary-key -** column. It is not possible for an UPDATE change to represent a change that -** modifies the values of primary key columns. If such a change is made, it -** is represented in a changeset as a DELETE followed by an INSERT. -** -** Changes are not recorded for rows that have NULL values stored in one or -** more of their PRIMARY KEY columns. If such a row is inserted or deleted, -** no corresponding change is present in the changesets returned by this -** function. If an existing row with one or more NULL values stored in -** PRIMARY KEY columns is updated so that all PRIMARY KEY columns are non-NULL, -** only an INSERT is appears in the changeset. Similarly, if an existing row -** with non-NULL PRIMARY KEY values is updated so that one or more of its -** PRIMARY KEY columns are set to NULL, the resulting changeset contains a -** DELETE change only. -** -** The contents of a changeset may be traversed using an iterator created -** using the [sqlite3changeset_start()] API. A changeset may be applied to -** a database with a compatible schema using the [sqlite3changeset_apply()] -** API. -** -** Within a changeset generated by this function, all changes related to a -** single table are grouped together. In other words, when iterating through -** a changeset or when applying a changeset to a database, all changes related -** to a single table are processed before moving on to the next table. Tables -** are sorted in the same order in which they were attached (or auto-attached) -** to the sqlite3_session object. The order in which the changes related to -** a single table are stored is undefined. -** -** Following a successful call to this function, it is the responsibility of -** the caller to eventually free the buffer that *ppChangeset points to using -** [sqlite3_free()]. -** -** <h3>Changeset Generation</h3> -** -** Once a table has been attached to a session object, the session object -** records the primary key values of all new rows inserted into the table. -** It also records the original primary key and other column values of any -** deleted or updated rows. For each unique primary key value, data is only -** recorded once - the first time a row with said primary key is inserted, -** updated or deleted in the lifetime of the session. -** -** There is one exception to the previous paragraph: when a row is inserted, -** updated or deleted, if one or more of its primary key columns contain a -** NULL value, no record of the change is made. -** -** The session object therefore accumulates two types of records - those -** that consist of primary key values only (created when the user inserts -** a new record) and those that consist of the primary key values and the -** original values of other table columns (created when the users deletes -** or updates a record). -** -** When this function is called, the requested changeset is created using -** both the accumulated records and the current contents of the database -** file. Specifically: -** -** <ul> -** <li> For each record generated by an insert, the database is queried -** for a row with a matching primary key. If one is found, an INSERT -** change is added to the changeset. If no such row is found, no change -** is added to the changeset. -** -** <li> For each record generated by an update or delete, the database is -** queried for a row with a matching primary key. If such a row is -** found and one or more of the non-primary key fields have been -** modified from their original values, an UPDATE change is added to -** the changeset. Or, if no such row is found in the table, a DELETE -** change is added to the changeset. If there is a row with a matching -** primary key in the database, but all fields contain their original -** values, no change is added to the changeset. -** </ul> -** -** This means, amongst other things, that if a row is inserted and then later -** deleted while a session object is active, neither the insert nor the delete -** will be present in the changeset. Or if a row is deleted and then later a -** row with the same primary key values inserted while a session object is -** active, the resulting changeset will contain an UPDATE change instead of -** a DELETE and an INSERT. -** -** When a session object is disabled (see the [sqlite3session_enable()] API), -** it does not accumulate records when rows are inserted, updated or deleted. -** This may appear to have some counter-intuitive effects if a single row -** is written to more than once during a session. For example, if a row -** is inserted while a session object is enabled, then later deleted while -** the same session object is disabled, no INSERT record will appear in the -** changeset, even though the delete took place while the session was disabled. -** Or, if one field of a row is updated while a session is disabled, and -** another field of the same row is updated while the session is enabled, the -** resulting changeset will contain an UPDATE change that updates both fields. -*/ - -/* Session object */ -/* OUT: Size of buffer at *ppChangeset */ -/* OUT: Buffer containing changeset */ - -/* -** CAPI3REF: Load The Difference Between Tables Into A Session -** METHOD: sqlite3_session -** -** If it is not already attached to the session object passed as the first -** argument, this function attaches table zTbl in the same manner as the -** [sqlite3session_attach()] function. If zTbl does not exist, or if it -** does not have a primary key, this function is a no-op (but does not return -** an error). -** -** Argument zFromDb must be the name of a database ("main", "temp" etc.) -** attached to the same database handle as the session object that contains -** a table compatible with the table attached to the session by this function. -** A table is considered compatible if it: -** -** <ul> -** <li> Has the same name, -** <li> Has the same set of columns declared in the same order, and -** <li> Has the same PRIMARY KEY definition. -** </ul> -** -** If the tables are not compatible, SQLITE_SCHEMA is returned. If the tables -** are compatible but do not have any PRIMARY KEY columns, it is not an error -** but no changes are added to the session object. As with other session -** APIs, tables without PRIMARY KEYs are simply ignored. -** -** This function adds a set of changes to the session object that could be -** used to update the table in database zFrom (call this the "from-table") -** so that its content is the same as the table attached to the session -** object (call this the "to-table"). Specifically: -** -** <ul> -** <li> For each row (primary key) that exists in the to-table but not in -** the from-table, an INSERT record is added to the session object. -** -** <li> For each row (primary key) that exists in the to-table but not in -** the from-table, a DELETE record is added to the session object. -** -** <li> For each row (primary key) that exists in both tables, but features -** different non-PK values in each, an UPDATE record is added to the -** session. -** </ul> -** -** To clarify, if this function is called and then a changeset constructed -** using [sqlite3session_changeset()], then after applying that changeset to -** database zFrom the contents of the two compatible tables would be -** identical. -** -** It an error if database zFrom does not exist or does not contain the -** required compatible table. -** -** If the operation successful, SQLITE_OK is returned. Otherwise, an SQLite -** error code. In this case, if argument pzErrMsg is not NULL, *pzErrMsg -** may be set to point to a buffer containing an English language error -** message. It is the responsibility of the caller to free this buffer using -** sqlite3_free(). -*/ - -/* -** CAPI3REF: Generate A Patchset From A Session Object -** METHOD: sqlite3_session -** -** The differences between a patchset and a changeset are that: -** -** <ul> -** <li> DELETE records consist of the primary key fields only. The -** original values of other fields are omitted. -** <li> The original values of any modified fields are omitted from -** UPDATE records. -** </ul> -** -** A patchset blob may be used with up to date versions of all -** sqlite3changeset_xxx API functions except for sqlite3changeset_invert(), -** which returns SQLITE_CORRUPT if it is passed a patchset. Similarly, -** attempting to use a patchset blob with old versions of the -** sqlite3changeset_xxx APIs also provokes an SQLITE_CORRUPT error. -** -** Because the non-primary key "old.*" fields are omitted, no -** SQLITE_CHANGESET_DATA conflicts can be detected or reported if a patchset -** is passed to the sqlite3changeset_apply() API. Other conflict types work -** in the same way as for changesets. -** -** Changes within a patchset are ordered in the same way as for changesets -** generated by the sqlite3session_changeset() function (i.e. all changes for -** a single table are grouped together, tables appear in the order in which -** they were attached to the session object). -*/ - -/* Session object */ -/* OUT: Size of buffer at *ppPatchset */ -/* OUT: Buffer containing patchset */ - -/* -** CAPI3REF: Test if a changeset has recorded any changes. -** -** Return non-zero if no changes to attached tables have been recorded by -** the session object passed as the first argument. Otherwise, if one or -** more changes have been recorded, return zero. -** -** Even if this function returns zero, it is possible that calling -** [sqlite3session_changeset()] on the session handle may still return a -** changeset that contains no changes. This can happen when a row in -** an attached table is modified and then later on the original values -** are restored. However, if this function returns non-zero, then it is -** guaranteed that a call to sqlite3session_changeset() will return a -** changeset containing zero changes. -*/ - -/* -** CAPI3REF: Create An Iterator To Traverse A Changeset -** CONSTRUCTOR: sqlite3_changeset_iter -** -** Create an iterator used to iterate through the contents of a changeset. -** If successful, *pp is set to point to the iterator handle and SQLITE_OK -** is returned. Otherwise, if an error occurs, *pp is set to zero and an -** SQLite error code is returned. -** -** The following functions can be used to advance and query a changeset -** iterator created by this function: -** -** <ul> -** <li> [sqlite3changeset_next()] -** <li> [sqlite3changeset_op()] -** <li> [sqlite3changeset_new()] -** <li> [sqlite3changeset_old()] -** </ul> -** -** It is the responsibility of the caller to eventually destroy the iterator -** by passing it to [sqlite3changeset_finalize()]. The buffer containing the -** changeset (pChangeset) must remain valid until after the iterator is -** destroyed. -** -** Assuming the changeset blob was created by one of the -** [sqlite3session_changeset()], [sqlite3changeset_concat()] or -** [sqlite3changeset_invert()] functions, all changes within the changeset -** that apply to a single table are grouped together. This means that when -** an application iterates through a changeset using an iterator created by -** this function, all changes that relate to a single table are visited -** consecutively. There is no chance that the iterator will visit a change -** the applies to table X, then one for table Y, and then later on visit -** another change for table X. -*/ - -/* OUT: New changeset iterator handle */ -/* Size of changeset blob in bytes */ -/* Pointer to blob containing changeset */ - -/* -** CAPI3REF: Advance A Changeset Iterator -** METHOD: sqlite3_changeset_iter -** -** This function may only be used with iterators created by function -** [sqlite3changeset_start()]. If it is called on an iterator passed to -** a conflict-handler callback by [sqlite3changeset_apply()], SQLITE_MISUSE -** is returned and the call has no effect. -** -** Immediately after an iterator is created by sqlite3changeset_start(), it -** does not point to any change in the changeset. Assuming the changeset -** is not empty, the first call to this function advances the iterator to -** point to the first change in the changeset. Each subsequent call advances -** the iterator to point to the next change in the changeset (if any). If -** no error occurs and the iterator points to a valid change after a call -** to sqlite3changeset_next() has advanced it, SQLITE_ROW is returned. -** Otherwise, if all changes in the changeset have already been visited, -** SQLITE_DONE is returned. -** -** If an error occurs, an SQLite error code is returned. Possible error -** codes include SQLITE_CORRUPT (if the changeset buffer is corrupt) or -** SQLITE_NOMEM. -*/ - -/* -** CAPI3REF: Obtain The Current Operation From A Changeset Iterator -** METHOD: sqlite3_changeset_iter -** -** The pIter argument passed to this function may either be an iterator -** passed to a conflict-handler by [sqlite3changeset_apply()], or an iterator -** created by [sqlite3changeset_start()]. In the latter case, the most recent -** call to [sqlite3changeset_next()] must have returned [SQLITE_ROW]. If this -** is not the case, this function returns [SQLITE_MISUSE]. -** -** If argument pzTab is not NULL, then *pzTab is set to point to a -** nul-terminated utf-8 encoded string containing the name of the table -** affected by the current change. The buffer remains valid until either -** sqlite3changeset_next() is called on the iterator or until the -** conflict-handler function returns. If pnCol is not NULL, then *pnCol is -** set to the number of columns in the table affected by the change. If -** pbIncorrect is not NULL, then *pbIndirect is set to true (1) if the change -** is an indirect change, or false (0) otherwise. See the documentation for -** [sqlite3session_indirect()] for a description of direct and indirect -** changes. Finally, if pOp is not NULL, then *pOp is set to one of -** [SQLITE_INSERT], [SQLITE_DELETE] or [SQLITE_UPDATE], depending on the -** type of change that the iterator currently points to. -** -** If no error occurs, SQLITE_OK is returned. If an error does occur, an -** SQLite error code is returned. The values of the output variables may not -** be trusted in this case. -*/ - -/* Iterator object */ -/* OUT: Pointer to table name */ -/* OUT: Number of columns in table */ -/* OUT: SQLITE_INSERT, DELETE or UPDATE */ -/* OUT: True for an 'indirect' change */ - -/* -** CAPI3REF: Obtain The Primary Key Definition Of A Table -** METHOD: sqlite3_changeset_iter -** -** For each modified table, a changeset includes the following: -** -** <ul> -** <li> The number of columns in the table, and -** <li> Which of those columns make up the tables PRIMARY KEY. -** </ul> -** -** This function is used to find which columns comprise the PRIMARY KEY of -** the table modified by the change that iterator pIter currently points to. -** If successful, *pabPK is set to point to an array of nCol entries, where -** nCol is the number of columns in the table. Elements of *pabPK are set to -** 0x01 if the corresponding column is part of the tables primary key, or -** 0x00 if it is not. -** -** If argument pnCol is not NULL, then *pnCol is set to the number of columns -** in the table. -** -** If this function is called when the iterator does not point to a valid -** entry, SQLITE_MISUSE is returned and the output variables zeroed. Otherwise, -** SQLITE_OK is returned and the output variables populated as described -** above. -*/ - -/* Iterator object */ -/* OUT: Array of boolean - true for PK cols */ -/* OUT: Number of entries in output array */ - -/* -** CAPI3REF: Obtain old.* Values From A Changeset Iterator -** METHOD: sqlite3_changeset_iter -** -** The pIter argument passed to this function may either be an iterator -** passed to a conflict-handler by [sqlite3changeset_apply()], or an iterator -** created by [sqlite3changeset_start()]. In the latter case, the most recent -** call to [sqlite3changeset_next()] must have returned SQLITE_ROW. -** Furthermore, it may only be called if the type of change that the iterator -** currently points to is either [SQLITE_DELETE] or [SQLITE_UPDATE]. Otherwise, -** this function returns [SQLITE_MISUSE] and sets *ppValue to NULL. -** -** Argument iVal must be greater than or equal to 0, and less than the number -** of columns in the table affected by the current change. Otherwise, -** [SQLITE_RANGE] is returned and *ppValue is set to NULL. -** -** If successful, this function sets *ppValue to point to a protected -** sqlite3_value object containing the iVal'th value from the vector of -** original row values stored as part of the UPDATE or DELETE change and -** returns SQLITE_OK. The name of the function comes from the fact that this -** is similar to the "old.*" columns available to update or delete triggers. -** -** If some other error occurs (e.g. an OOM condition), an SQLite error code -** is returned and *ppValue is set to NULL. -*/ - -/* Changeset iterator */ -/* Column number */ -/* OUT: Old value (or NULL pointer) */ - -/* -** CAPI3REF: Obtain new.* Values From A Changeset Iterator -** METHOD: sqlite3_changeset_iter -** -** The pIter argument passed to this function may either be an iterator -** passed to a conflict-handler by [sqlite3changeset_apply()], or an iterator -** created by [sqlite3changeset_start()]. In the latter case, the most recent -** call to [sqlite3changeset_next()] must have returned SQLITE_ROW. -** Furthermore, it may only be called if the type of change that the iterator -** currently points to is either [SQLITE_UPDATE] or [SQLITE_INSERT]. Otherwise, -** this function returns [SQLITE_MISUSE] and sets *ppValue to NULL. -** -** Argument iVal must be greater than or equal to 0, and less than the number -** of columns in the table affected by the current change. Otherwise, -** [SQLITE_RANGE] is returned and *ppValue is set to NULL. -** -** If successful, this function sets *ppValue to point to a protected -** sqlite3_value object containing the iVal'th value from the vector of -** new row values stored as part of the UPDATE or INSERT change and -** returns SQLITE_OK. If the change is an UPDATE and does not include -** a new value for the requested column, *ppValue is set to NULL and -** SQLITE_OK returned. The name of the function comes from the fact that -** this is similar to the "new.*" columns available to update or delete -** triggers. -** -** If some other error occurs (e.g. an OOM condition), an SQLite error code -** is returned and *ppValue is set to NULL. -*/ - -/* Changeset iterator */ -/* Column number */ -/* OUT: New value (or NULL pointer) */ - -/* -** CAPI3REF: Obtain Conflicting Row Values From A Changeset Iterator -** METHOD: sqlite3_changeset_iter -** -** This function should only be used with iterator objects passed to a -** conflict-handler callback by [sqlite3changeset_apply()] with either -** [SQLITE_CHANGESET_DATA] or [SQLITE_CHANGESET_CONFLICT]. If this function -** is called on any other iterator, [SQLITE_MISUSE] is returned and *ppValue -** is set to NULL. -** -** Argument iVal must be greater than or equal to 0, and less than the number -** of columns in the table affected by the current change. Otherwise, -** [SQLITE_RANGE] is returned and *ppValue is set to NULL. -** -** If successful, this function sets *ppValue to point to a protected -** sqlite3_value object containing the iVal'th value from the -** "conflicting row" associated with the current conflict-handler callback -** and returns SQLITE_OK. -** -** If some other error occurs (e.g. an OOM condition), an SQLite error code -** is returned and *ppValue is set to NULL. -*/ - -/* Changeset iterator */ -/* Column number */ -/* OUT: Value from conflicting row */ - -/* -** CAPI3REF: Determine The Number Of Foreign Key Constraint Violations -** METHOD: sqlite3_changeset_iter -** -** This function may only be called with an iterator passed to an -** SQLITE_CHANGESET_FOREIGN_KEY conflict handler callback. In this case -** it sets the output variable to the total number of known foreign key -** violations in the destination database and returns SQLITE_OK. -** -** In all other cases this function returns SQLITE_MISUSE. -*/ - -/* Changeset iterator */ -/* OUT: Number of FK violations */ - -/* -** CAPI3REF: Finalize A Changeset Iterator -** METHOD: sqlite3_changeset_iter -** -** This function is used to finalize an iterator allocated with -** [sqlite3changeset_start()]. -** -** This function should only be called on iterators created using the -** [sqlite3changeset_start()] function. If an application calls this -** function with an iterator passed to a conflict-handler by -** [sqlite3changeset_apply()], [SQLITE_MISUSE] is immediately returned and the -** call has no effect. -** -** If an error was encountered within a call to an sqlite3changeset_xxx() -** function (for example an [SQLITE_CORRUPT] in [sqlite3changeset_next()] or an -** [SQLITE_NOMEM] in [sqlite3changeset_new()]) then an error code corresponding -** to that error is returned by this function. Otherwise, SQLITE_OK is -** returned. This is to allow the following pattern (pseudo-code): -** -** <pre> -** sqlite3changeset_start(); -** while( SQLITE_ROW==sqlite3changeset_next() ){ -** // Do something with change. -** } -** rc = sqlite3changeset_finalize(); -** if( rc!=SQLITE_OK ){ -** // An error has occurred -** } -** </pre> -*/ - -/* -** CAPI3REF: Invert A Changeset -** -** This function is used to "invert" a changeset object. Applying an inverted -** changeset to a database reverses the effects of applying the uninverted -** changeset. Specifically: -** -** <ul> -** <li> Each DELETE change is changed to an INSERT, and -** <li> Each INSERT change is changed to a DELETE, and -** <li> For each UPDATE change, the old.* and new.* values are exchanged. -** </ul> -** -** This function does not change the order in which changes appear within -** the changeset. It merely reverses the sense of each individual change. -** -** If successful, a pointer to a buffer containing the inverted changeset -** is stored in *ppOut, the size of the same buffer is stored in *pnOut, and -** SQLITE_OK is returned. If an error occurs, both *pnOut and *ppOut are -** zeroed and an SQLite error code returned. -** -** It is the responsibility of the caller to eventually call sqlite3_free() -** on the *ppOut pointer to free the buffer allocation following a successful -** call to this function. -** -** WARNING/TODO: This function currently assumes that the input is a valid -** changeset. If it is not, the results are undefined. -*/ - -/* Input changeset */ -/* OUT: Inverse of input */ - -/* -** CAPI3REF: Concatenate Two Changeset Objects -** -** This function is used to concatenate two changesets, A and B, into a -** single changeset. The result is a changeset equivalent to applying -** changeset A followed by changeset B. -** -** This function combines the two input changesets using an -** sqlite3_changegroup object. Calling it produces similar results as the -** following code fragment: -** -** <pre> -** sqlite3_changegroup *pGrp; -** rc = sqlite3_changegroup_new(&pGrp); -** if( rc==SQLITE_OK ) rc = sqlite3changegroup_add(pGrp, nA, pA); -** if( rc==SQLITE_OK ) rc = sqlite3changegroup_add(pGrp, nB, pB); -** if( rc==SQLITE_OK ){ -** rc = sqlite3changegroup_output(pGrp, pnOut, ppOut); -** }else{ -** *ppOut = 0; -** *pnOut = 0; -** } -** </pre> -** -** Refer to the sqlite3_changegroup documentation below for details. -*/ - -/* Number of bytes in buffer pA */ -/* Pointer to buffer containing changeset A */ -/* Number of bytes in buffer pB */ -/* Pointer to buffer containing changeset B */ -/* OUT: Number of bytes in output changeset */ -/* OUT: Buffer containing output changeset */ - -/* -** CAPI3REF: Changegroup Handle -** -** A changegroup is an object used to combine two or more -** [changesets] or [patchsets] -*/ - -/* -** CAPI3REF: Create A New Changegroup Object -** CONSTRUCTOR: sqlite3_changegroup -** -** An sqlite3_changegroup object is used to combine two or more changesets -** (or patchsets) into a single changeset (or patchset). A single changegroup -** object may combine changesets or patchsets, but not both. The output is -** always in the same format as the input. -** -** If successful, this function returns SQLITE_OK and populates (*pp) with -** a pointer to a new sqlite3_changegroup object before returning. The caller -** should eventually free the returned object using a call to -** sqlite3changegroup_delete(). If an error occurs, an SQLite error code -** (i.e. SQLITE_NOMEM) is returned and *pp is set to NULL. -** -** The usual usage pattern for an sqlite3_changegroup object is as follows: -** -** <ul> -** <li> It is created using a call to sqlite3changegroup_new(). -** -** <li> Zero or more changesets (or patchsets) are added to the object -** by calling sqlite3changegroup_add(). -** -** <li> The result of combining all input changesets together is obtained -** by the application via a call to sqlite3changegroup_output(). -** -** <li> The object is deleted using a call to sqlite3changegroup_delete(). -** </ul> -** -** Any number of calls to add() and output() may be made between the calls to -** new() and delete(), and in any order. -** -** As well as the regular sqlite3changegroup_add() and -** sqlite3changegroup_output() functions, also available are the streaming -** versions sqlite3changegroup_add_strm() and sqlite3changegroup_output_strm(). -*/ - -/* -** CAPI3REF: Add A Changeset To A Changegroup -** METHOD: sqlite3_changegroup -** -** Add all changes within the changeset (or patchset) in buffer pData (size -** nData bytes) to the changegroup. -** -** If the buffer contains a patchset, then all prior calls to this function -** on the same changegroup object must also have specified patchsets. Or, if -** the buffer contains a changeset, so must have the earlier calls to this -** function. Otherwise, SQLITE_ERROR is returned and no changes are added -** to the changegroup. -** -** Rows within the changeset and changegroup are identified by the values in -** their PRIMARY KEY columns. A change in the changeset is considered to -** apply to the same row as a change already present in the changegroup if -** the two rows have the same primary key. -** -** Changes to rows that do not already appear in the changegroup are -** simply copied into it. Or, if both the new changeset and the changegroup -** contain changes that apply to a single row, the final contents of the -** changegroup depends on the type of each change, as follows: -** -** <table border=1 style="margin-left:8ex;margin-right:8ex"> -** <tr><th style="white-space:pre">Existing Change </th> -** <th style="white-space:pre">New Change </th> -** <th>Output Change -** <tr><td>INSERT <td>INSERT <td> -** The new change is ignored. This case does not occur if the new -** changeset was recorded immediately after the changesets already -** added to the changegroup. -** <tr><td>INSERT <td>UPDATE <td> -** The INSERT change remains in the changegroup. The values in the -** INSERT change are modified as if the row was inserted by the -** existing change and then updated according to the new change. -** <tr><td>INSERT <td>DELETE <td> -** The existing INSERT is removed from the changegroup. The DELETE is -** not added. -** <tr><td>UPDATE <td>INSERT <td> -** The new change is ignored. This case does not occur if the new -** changeset was recorded immediately after the changesets already -** added to the changegroup. -** <tr><td>UPDATE <td>UPDATE <td> -** The existing UPDATE remains within the changegroup. It is amended -** so that the accompanying values are as if the row was updated once -** by the existing change and then again by the new change. -** <tr><td>UPDATE <td>DELETE <td> -** The existing UPDATE is replaced by the new DELETE within the -** changegroup. -** <tr><td>DELETE <td>INSERT <td> -** If one or more of the column values in the row inserted by the -** new change differ from those in the row deleted by the existing -** change, the existing DELETE is replaced by an UPDATE within the -** changegroup. Otherwise, if the inserted row is exactly the same -** as the deleted row, the existing DELETE is simply discarded. -** <tr><td>DELETE <td>UPDATE <td> -** The new change is ignored. This case does not occur if the new -** changeset was recorded immediately after the changesets already -** added to the changegroup. -** <tr><td>DELETE <td>DELETE <td> -** The new change is ignored. This case does not occur if the new -** changeset was recorded immediately after the changesets already -** added to the changegroup. -** </table> -** -** If the new changeset contains changes to a table that is already present -** in the changegroup, then the number of columns and the position of the -** primary key columns for the table must be consistent. If this is not the -** case, this function fails with SQLITE_SCHEMA. If the input changeset -** appears to be corrupt and the corruption is detected, SQLITE_CORRUPT is -** returned. Or, if an out-of-memory condition occurs during processing, this -** function returns SQLITE_NOMEM. In all cases, if an error occurs the -** final contents of the changegroup is undefined. -** -** If no error occurs, SQLITE_OK is returned. -*/ - -/* -** CAPI3REF: Obtain A Composite Changeset From A Changegroup -** METHOD: sqlite3_changegroup -** -** Obtain a buffer containing a changeset (or patchset) representing the -** current contents of the changegroup. If the inputs to the changegroup -** were themselves changesets, the output is a changeset. Or, if the -** inputs were patchsets, the output is also a patchset. -** -** As with the output of the sqlite3session_changeset() and -** sqlite3session_patchset() functions, all changes related to a single -** table are grouped together in the output of this function. Tables appear -** in the same order as for the very first changeset added to the changegroup. -** If the second or subsequent changesets added to the changegroup contain -** changes for tables that do not appear in the first changeset, they are -** appended onto the end of the output changeset, again in the order in -** which they are first encountered. -** -** If an error occurs, an SQLite error code is returned and the output -** variables (*pnData) and (*ppData) are set to 0. Otherwise, SQLITE_OK -** is returned and the output variables are set to the size of and a -** pointer to the output buffer, respectively. In this case it is the -** responsibility of the caller to eventually free the buffer using a -** call to sqlite3_free(). -*/ - -/* OUT: Size of output buffer in bytes */ -/* OUT: Pointer to output buffer */ - -/* -** CAPI3REF: Delete A Changegroup Object -** DESTRUCTOR: sqlite3_changegroup -*/ - -/* -** CAPI3REF: Apply A Changeset To A Database -** -** Apply a changeset or patchset to a database. These functions attempt to -** update the "main" database attached to handle db with the changes found in -** the changeset passed via the second and third arguments. -** -** The fourth argument (xFilter) passed to these functions is the "filter -** callback". If it is not NULL, then for each table affected by at least one -** change in the changeset, the filter callback is invoked with -** the table name as the second argument, and a copy of the context pointer -** passed as the sixth argument as the first. If the "filter callback" -** returns zero, then no attempt is made to apply any changes to the table. -** Otherwise, if the return value is non-zero or the xFilter argument to -** is NULL, all changes related to the table are attempted. -** -** For each table that is not excluded by the filter callback, this function -** tests that the target database contains a compatible table. A table is -** considered compatible if all of the following are true: -** -** <ul> -** <li> The table has the same name as the name recorded in the -** changeset, and -** <li> The table has at least as many columns as recorded in the -** changeset, and -** <li> The table has primary key columns in the same position as -** recorded in the changeset. -** </ul> -** -** If there is no compatible table, it is not an error, but none of the -** changes associated with the table are applied. A warning message is issued -** via the sqlite3_log() mechanism with the error code SQLITE_SCHEMA. At most -** one such warning is issued for each table in the changeset. -** -** For each change for which there is a compatible table, an attempt is made -** to modify the table contents according to the UPDATE, INSERT or DELETE -** change. If a change cannot be applied cleanly, the conflict handler -** function passed as the fifth argument to sqlite3changeset_apply() may be -** invoked. A description of exactly when the conflict handler is invoked for -** each type of change is below. -** -** Unlike the xFilter argument, xConflict may not be passed NULL. The results -** of passing anything other than a valid function pointer as the xConflict -** argument are undefined. -** -** Each time the conflict handler function is invoked, it must return one -** of [SQLITE_CHANGESET_OMIT], [SQLITE_CHANGESET_ABORT] or -** [SQLITE_CHANGESET_REPLACE]. SQLITE_CHANGESET_REPLACE may only be returned -** if the second argument passed to the conflict handler is either -** SQLITE_CHANGESET_DATA or SQLITE_CHANGESET_CONFLICT. If the conflict-handler -** returns an illegal value, any changes already made are rolled back and -** the call to sqlite3changeset_apply() returns SQLITE_MISUSE. Different -** actions are taken by sqlite3changeset_apply() depending on the value -** returned by each invocation of the conflict-handler function. Refer to -** the documentation for the three -** [SQLITE_CHANGESET_OMIT|available return values] for details. -** -** <dl> -** <dt>DELETE Changes<dd> -** For each DELETE change, the function checks if the target database -** contains a row with the same primary key value (or values) as the -** original row values stored in the changeset. If it does, and the values -** stored in all non-primary key columns also match the values stored in -** the changeset the row is deleted from the target database. -** -** If a row with matching primary key values is found, but one or more of -** the non-primary key fields contains a value different from the original -** row value stored in the changeset, the conflict-handler function is -** invoked with [SQLITE_CHANGESET_DATA] as the second argument. If the -** database table has more columns than are recorded in the changeset, -** only the values of those non-primary key fields are compared against -** the current database contents - any trailing database table columns -** are ignored. -** -** If no row with matching primary key values is found in the database, -** the conflict-handler function is invoked with [SQLITE_CHANGESET_NOTFOUND] -** passed as the second argument. -** -** If the DELETE operation is attempted, but SQLite returns SQLITE_CONSTRAINT -** (which can only happen if a foreign key constraint is violated), the -** conflict-handler function is invoked with [SQLITE_CHANGESET_CONSTRAINT] -** passed as the second argument. This includes the case where the DELETE -** operation is attempted because an earlier call to the conflict handler -** function returned [SQLITE_CHANGESET_REPLACE]. -** -** <dt>INSERT Changes<dd> -** For each INSERT change, an attempt is made to insert the new row into -** the database. If the changeset row contains fewer fields than the -** database table, the trailing fields are populated with their default -** values. -** -** If the attempt to insert the row fails because the database already -** contains a row with the same primary key values, the conflict handler -** function is invoked with the second argument set to -** [SQLITE_CHANGESET_CONFLICT]. -** -** If the attempt to insert the row fails because of some other constraint -** violation (e.g. NOT NULL or UNIQUE), the conflict handler function is -** invoked with the second argument set to [SQLITE_CHANGESET_CONSTRAINT]. -** This includes the case where the INSERT operation is re-attempted because -** an earlier call to the conflict handler function returned -** [SQLITE_CHANGESET_REPLACE]. -** -** <dt>UPDATE Changes<dd> -** For each UPDATE change, the function checks if the target database -** contains a row with the same primary key value (or values) as the -** original row values stored in the changeset. If it does, and the values -** stored in all modified non-primary key columns also match the values -** stored in the changeset the row is updated within the target database. -** -** If a row with matching primary key values is found, but one or more of -** the modified non-primary key fields contains a value different from an -** original row value stored in the changeset, the conflict-handler function -** is invoked with [SQLITE_CHANGESET_DATA] as the second argument. Since -** UPDATE changes only contain values for non-primary key fields that are -** to be modified, only those fields need to match the original values to -** avoid the SQLITE_CHANGESET_DATA conflict-handler callback. -** -** If no row with matching primary key values is found in the database, -** the conflict-handler function is invoked with [SQLITE_CHANGESET_NOTFOUND] -** passed as the second argument. -** -** If the UPDATE operation is attempted, but SQLite returns -** SQLITE_CONSTRAINT, the conflict-handler function is invoked with -** [SQLITE_CHANGESET_CONSTRAINT] passed as the second argument. -** This includes the case where the UPDATE operation is attempted after -** an earlier call to the conflict handler function returned -** [SQLITE_CHANGESET_REPLACE]. -** </dl> -** -** It is safe to execute SQL statements, including those that write to the -** table that the callback related to, from within the xConflict callback. -** This can be used to further customize the applications conflict -** resolution strategy. -** -** All changes made by these functions are enclosed in a savepoint transaction. -** If any other error (aside from a constraint failure when attempting to -** write to the target database) occurs, then the savepoint transaction is -** rolled back, restoring the target database to its original state, and an -** SQLite error code returned. -** -** If the output parameters (ppRebase) and (pnRebase) are non-NULL and -** the input is a changeset (not a patchset), then sqlite3changeset_apply_v2() -** may set (*ppRebase) to point to a "rebase" that may be used with the -** sqlite3_rebaser APIs buffer before returning. In this case (*pnRebase) -** is set to the size of the buffer in bytes. It is the responsibility of the -** caller to eventually free any such buffer using sqlite3_free(). The buffer -** is only allocated and populated if one or more conflicts were encountered -** while applying the patchset. See comments surrounding the sqlite3_rebaser -** APIs for further details. -** -** The behavior of sqlite3changeset_apply_v2() and its streaming equivalent -** may be modified by passing a combination of -** [SQLITE_CHANGESETAPPLY_NOSAVEPOINT | supported flags] as the 9th parameter. -** -** Note that the sqlite3changeset_apply_v2() API is still <b>experimental</b> -** and therefore subject to change. -*/ - -/* Apply change to "main" db of this handle */ -/* Size of changeset in bytes */ -/* Changeset blob */ - -/* Copy of sixth arg to _apply() */ -/* Table name */ - -/* Copy of sixth arg to _apply() */ -/* DATA, MISSING, CONFLICT, CONSTRAINT */ -/* Handle describing change and conflict */ - -/* First argument passed to xConflict */ - -/* Apply change to "main" db of this handle */ -/* Size of changeset in bytes */ -/* Changeset blob */ - -/* Copy of sixth arg to _apply() */ -/* Table name */ - -/* Copy of sixth arg to _apply() */ -/* DATA, MISSING, CONFLICT, CONSTRAINT */ -/* Handle describing change and conflict */ - -/* First argument passed to xConflict */ -/* OUT: Rebase data */ -/* Combination of SESSION_APPLY_* flags */ - -/* -** CAPI3REF: Flags for sqlite3changeset_apply_v2 -** -** The following flags may passed via the 9th parameter to -** [sqlite3changeset_apply_v2] and [sqlite3changeset_apply_v2_strm]: -** -** <dl> -** <dt>SQLITE_CHANGESETAPPLY_NOSAVEPOINT <dd> -** Usually, the sessions module encloses all operations performed by -** a single call to apply_v2() or apply_v2_strm() in a [SAVEPOINT]. The -** SAVEPOINT is committed if the changeset or patchset is successfully -** applied, or rolled back if an error occurs. Specifying this flag -** causes the sessions module to omit this savepoint. In this case, if the -** caller has an open transaction or savepoint when apply_v2() is called, -** it may revert the partially applied changeset by rolling it back. -*/ - -/* -** CAPI3REF: Constants Passed To The Conflict Handler -** -** Values that may be passed as the second argument to a conflict-handler. -** -** <dl> -** <dt>SQLITE_CHANGESET_DATA<dd> -** The conflict handler is invoked with CHANGESET_DATA as the second argument -** when processing a DELETE or UPDATE change if a row with the required -** PRIMARY KEY fields is present in the database, but one or more other -** (non primary-key) fields modified by the update do not contain the -** expected "before" values. -** -** The conflicting row, in this case, is the database row with the matching -** primary key. -** -** <dt>SQLITE_CHANGESET_NOTFOUND<dd> -** The conflict handler is invoked with CHANGESET_NOTFOUND as the second -** argument when processing a DELETE or UPDATE change if a row with the -** required PRIMARY KEY fields is not present in the database. -** -** There is no conflicting row in this case. The results of invoking the -** sqlite3changeset_conflict() API are undefined. -** -** <dt>SQLITE_CHANGESET_CONFLICT<dd> -** CHANGESET_CONFLICT is passed as the second argument to the conflict -** handler while processing an INSERT change if the operation would result -** in duplicate primary key values. -** -** The conflicting row in this case is the database row with the matching -** primary key. -** -** <dt>SQLITE_CHANGESET_FOREIGN_KEY<dd> -** If foreign key handling is enabled, and applying a changeset leaves the -** database in a state containing foreign key violations, the conflict -** handler is invoked with CHANGESET_FOREIGN_KEY as the second argument -** exactly once before the changeset is committed. If the conflict handler -** returns CHANGESET_OMIT, the changes, including those that caused the -** foreign key constraint violation, are committed. Or, if it returns -** CHANGESET_ABORT, the changeset is rolled back. -** -** No current or conflicting row information is provided. The only function -** it is possible to call on the supplied sqlite3_changeset_iter handle -** is sqlite3changeset_fk_conflicts(). -** -** <dt>SQLITE_CHANGESET_CONSTRAINT<dd> -** If any other constraint violation occurs while applying a change (i.e. -** a UNIQUE, CHECK or NOT NULL constraint), the conflict handler is -** invoked with CHANGESET_CONSTRAINT as the second argument. -** -** There is no conflicting row in this case. The results of invoking the -** sqlite3changeset_conflict() API are undefined. -** -** </dl> -*/ - -/* -** CAPI3REF: Constants Returned By The Conflict Handler -** -** A conflict handler callback must return one of the following three values. -** -** <dl> -** <dt>SQLITE_CHANGESET_OMIT<dd> -** If a conflict handler returns this value no special action is taken. The -** change that caused the conflict is not applied. The session module -** continues to the next change in the changeset. -** -** <dt>SQLITE_CHANGESET_REPLACE<dd> -** This value may only be returned if the second argument to the conflict -** handler was SQLITE_CHANGESET_DATA or SQLITE_CHANGESET_CONFLICT. If this -** is not the case, any changes applied so far are rolled back and the -** call to sqlite3changeset_apply() returns SQLITE_MISUSE. -** -** If CHANGESET_REPLACE is returned by an SQLITE_CHANGESET_DATA conflict -** handler, then the conflicting row is either updated or deleted, depending -** on the type of change. -** -** If CHANGESET_REPLACE is returned by an SQLITE_CHANGESET_CONFLICT conflict -** handler, then the conflicting row is removed from the database and a -** second attempt to apply the change is made. If this second attempt fails, -** the original row is restored to the database before continuing. -** -** <dt>SQLITE_CHANGESET_ABORT<dd> -** If this value is returned, any changes applied so far are rolled back -** and the call to sqlite3changeset_apply() returns SQLITE_ABORT. -** </dl> -*/ - -/* -** CAPI3REF: Rebasing changesets -** EXPERIMENTAL -** -** Suppose there is a site hosting a database in state S0. And that -** modifications are made that move that database to state S1 and a -** changeset recorded (the "local" changeset). Then, a changeset based -** on S0 is received from another site (the "remote" changeset) and -** applied to the database. The database is then in state -** (S1+"remote"), where the exact state depends on any conflict -** resolution decisions (OMIT or REPLACE) made while applying "remote". -** Rebasing a changeset is to update it to take those conflict -** resolution decisions into account, so that the same conflicts -** do not have to be resolved elsewhere in the network. -** -** For example, if both the local and remote changesets contain an -** INSERT of the same key on "CREATE TABLE t1(a PRIMARY KEY, b)": -** -** local: INSERT INTO t1 VALUES(1, 'v1'); -** remote: INSERT INTO t1 VALUES(1, 'v2'); -** -** and the conflict resolution is REPLACE, then the INSERT change is -** removed from the local changeset (it was overridden). Or, if the -** conflict resolution was "OMIT", then the local changeset is modified -** to instead contain: -** -** UPDATE t1 SET b = 'v2' WHERE a=1; -** -** Changes within the local changeset are rebased as follows: -** -** <dl> -** <dt>Local INSERT<dd> -** This may only conflict with a remote INSERT. If the conflict -** resolution was OMIT, then add an UPDATE change to the rebased -** changeset. Or, if the conflict resolution was REPLACE, add -** nothing to the rebased changeset. -** -** <dt>Local DELETE<dd> -** This may conflict with a remote UPDATE or DELETE. In both cases the -** only possible resolution is OMIT. If the remote operation was a -** DELETE, then add no change to the rebased changeset. If the remote -** operation was an UPDATE, then the old.* fields of change are updated -** to reflect the new.* values in the UPDATE. -** -** <dt>Local UPDATE<dd> -** This may conflict with a remote UPDATE or DELETE. If it conflicts -** with a DELETE, and the conflict resolution was OMIT, then the update -** is changed into an INSERT. Any undefined values in the new.* record -** from the update change are filled in using the old.* values from -** the conflicting DELETE. Or, if the conflict resolution was REPLACE, -** the UPDATE change is simply omitted from the rebased changeset. -** -** If conflict is with a remote UPDATE and the resolution is OMIT, then -** the old.* values are rebased using the new.* values in the remote -** change. Or, if the resolution is REPLACE, then the change is copied -** into the rebased changeset with updates to columns also updated by -** the conflicting remote UPDATE removed. If this means no columns would -** be updated, the change is omitted. -** </dl> -** -** A local change may be rebased against multiple remote changes -** simultaneously. If a single key is modified by multiple remote -** changesets, they are combined as follows before the local changeset -** is rebased: -** -** <ul> -** <li> If there has been one or more REPLACE resolutions on a -** key, it is rebased according to a REPLACE. -** -** <li> If there have been no REPLACE resolutions on a key, then -** the local changeset is rebased according to the most recent -** of the OMIT resolutions. -** </ul> -** -** Note that conflict resolutions from multiple remote changesets are -** combined on a per-field basis, not per-row. This means that in the -** case of multiple remote UPDATE operations, some fields of a single -** local change may be rebased for REPLACE while others are rebased for -** OMIT. -** -** In order to rebase a local changeset, the remote changeset must first -** be applied to the local database using sqlite3changeset_apply_v2() and -** the buffer of rebase information captured. Then: -** -** <ol> -** <li> An sqlite3_rebaser object is created by calling -** sqlite3rebaser_create(). -** <li> The new object is configured with the rebase buffer obtained from -** sqlite3changeset_apply_v2() by calling sqlite3rebaser_configure(). -** If the local changeset is to be rebased against multiple remote -** changesets, then sqlite3rebaser_configure() should be called -** multiple times, in the same order that the multiple -** sqlite3changeset_apply_v2() calls were made. -** <li> Each local changeset is rebased by calling sqlite3rebaser_rebase(). -** <li> The sqlite3_rebaser object is deleted by calling -** sqlite3rebaser_delete(). -** </ol> -*/ - -/* -** CAPI3REF: Create a changeset rebaser object. -** EXPERIMENTAL -** -** Allocate a new changeset rebaser object. If successful, set (*ppNew) to -** point to the new object and return SQLITE_OK. Otherwise, if an error -** occurs, return an SQLite error code (e.g. SQLITE_NOMEM) and set (*ppNew) -** to NULL. -*/ - -/* -** CAPI3REF: Configure a changeset rebaser object. -** EXPERIMENTAL -** -** Configure the changeset rebaser object to rebase changesets according -** to the conflict resolutions described by buffer pRebase (size nRebase -** bytes), which must have been obtained from a previous call to -** sqlite3changeset_apply_v2(). -*/ - -/* -** CAPI3REF: Rebase a changeset -** EXPERIMENTAL -** -** Argument pIn must point to a buffer containing a changeset nIn bytes -** in size. This function allocates and populates a buffer with a copy -** of the changeset rebased rebased according to the configuration of the -** rebaser object passed as the first argument. If successful, (*ppOut) -** is set to point to the new buffer containing the rebased changset and -** (*pnOut) to its size in bytes and SQLITE_OK returned. It is the -** responsibility of the caller to eventually free the new buffer using -** sqlite3_free(). Otherwise, if an error occurs, (*ppOut) and (*pnOut) -** are set to zero and an SQLite error code returned. -*/ - -/* -** CAPI3REF: Delete a changeset rebaser object. -** EXPERIMENTAL -** -** Delete the changeset rebaser object and all associated resources. There -** should be one call to this function for each successful invocation -** of sqlite3rebaser_create(). -*/ - -/* -** CAPI3REF: Streaming Versions of API functions. -** -** The six streaming API xxx_strm() functions serve similar purposes to the -** corresponding non-streaming API functions: -** -** <table border=1 style="margin-left:8ex;margin-right:8ex"> -** <tr><th>Streaming function<th>Non-streaming equivalent</th> -** <tr><td>sqlite3changeset_apply_strm<td>[sqlite3changeset_apply] -** <tr><td>sqlite3changeset_apply_strm_v2<td>[sqlite3changeset_apply_v2] -** <tr><td>sqlite3changeset_concat_strm<td>[sqlite3changeset_concat] -** <tr><td>sqlite3changeset_invert_strm<td>[sqlite3changeset_invert] -** <tr><td>sqlite3changeset_start_strm<td>[sqlite3changeset_start] -** <tr><td>sqlite3session_changeset_strm<td>[sqlite3session_changeset] -** <tr><td>sqlite3session_patchset_strm<td>[sqlite3session_patchset] -** </table> -** -** Non-streaming functions that accept changesets (or patchsets) as input -** require that the entire changeset be stored in a single buffer in memory. -** Similarly, those that return a changeset or patchset do so by returning -** a pointer to a single large buffer allocated using sqlite3_malloc(). -** Normally this is convenient. However, if an application running in a -** low-memory environment is required to handle very large changesets, the -** large contiguous memory allocations required can become onerous. -** -** In order to avoid this problem, instead of a single large buffer, input -** is passed to a streaming API functions by way of a callback function that -** the sessions module invokes to incrementally request input data as it is -** required. In all cases, a pair of API function parameters such as -** -** <pre> -** int nChangeset, -** void *pChangeset, -** </pre> -** -** Is replaced by: -** -** <pre> -** int (*xInput)(void *pIn, void *pData, int *pnData), -** void *pIn, -** </pre> -** -** Each time the xInput callback is invoked by the sessions module, the first -** argument passed is a copy of the supplied pIn context pointer. The second -** argument, pData, points to a buffer (*pnData) bytes in size. Assuming no -** error occurs the xInput method should copy up to (*pnData) bytes of data -** into the buffer and set (*pnData) to the actual number of bytes copied -** before returning SQLITE_OK. If the input is completely exhausted, (*pnData) -** should be set to zero to indicate this. Or, if an error occurs, an SQLite -** error code should be returned. In all cases, if an xInput callback returns -** an error, all processing is abandoned and the streaming API function -** returns a copy of the error code to the caller. -** -** In the case of sqlite3changeset_start_strm(), the xInput callback may be -** invoked by the sessions module at any point during the lifetime of the -** iterator. If such an xInput callback returns an error, the iterator enters -** an error state, whereby all subsequent calls to iterator functions -** immediately fail with the same error code as returned by xInput. -** -** Similarly, streaming API functions that return changesets (or patchsets) -** return them in chunks by way of a callback function instead of via a -** pointer to a single large buffer. In this case, a pair of parameters such -** as: -** -** <pre> -** int *pnChangeset, -** void **ppChangeset, -** </pre> -** -** Is replaced by: -** -** <pre> -** int (*xOutput)(void *pOut, const void *pData, int nData), -** void *pOut -** </pre> -** -** The xOutput callback is invoked zero or more times to return data to -** the application. The first parameter passed to each call is a copy of the -** pOut pointer supplied by the application. The second parameter, pData, -** points to a buffer nData bytes in size containing the chunk of output -** data being returned. If the xOutput callback successfully processes the -** supplied data, it should return SQLITE_OK to indicate success. Otherwise, -** it should return some other SQLite error code. In this case processing -** is immediately abandoned and the streaming API function returns a copy -** of the xOutput error code to the application. -** -** The sessions module never invokes an xOutput callback with the third -** parameter set to a value less than or equal to zero. Other than this, -** no guarantees are made as to the size of the chunks of data returned. -*/ - -/* Apply change to "main" db of this handle */ -/* Input function */ -/* First arg for xInput */ - -/* Copy of sixth arg to _apply() */ -/* Table name */ - -/* Copy of sixth arg to _apply() */ -/* DATA, MISSING, CONFLICT, CONSTRAINT */ -/* Handle describing change and conflict */ - -/* First argument passed to xConflict */ - -/* Apply change to "main" db of this handle */ -/* Input function */ -/* First arg for xInput */ - -/* Copy of sixth arg to _apply() */ -/* Table name */ - -/* Copy of sixth arg to _apply() */ -/* DATA, MISSING, CONFLICT, CONSTRAINT */ -/* Handle describing change and conflict */ - -/* First argument passed to xConflict */ - -/* -** Make sure we can call this stuff from C++. -*/ - -/* !defined(__SQLITESESSION_H_) && defined(SQLITE_ENABLE_SESSION) */ - -/******** End of sqlite3session.h *********/ -/******** Begin file fts5.h *********/ -/* -** 2014 May 31 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: -** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. -** -****************************************************************************** -** -** Interfaces to extend FTS5. Using the interfaces defined in this file, -** FTS5 may be extended with: -** -** * custom tokenizers, and -** * custom auxiliary functions. -*/ - -/************************************************************************* -** CUSTOM AUXILIARY FUNCTIONS -** -** Virtual table implementations may overload SQL functions by implementing -** the sqlite3_module.xFindFunction() method. -*/ - -struct Fts5Context; - -/* API offered by current FTS version */ -/* First arg to pass to pApi functions */ -/* Context for returning result/error */ -/* Number of values in apVal[] array */ -/* Array of trailing arguments */ -alias fts5_extension_function = void function(const(Fts5ExtensionApi)* pApi, Fts5Context* pFts, sqlite3_context* pCtx, int nVal, sqlite3_value** apVal); - -struct Fts5PhraseIter -{ - const(ubyte)* a; - const(ubyte)* b; -} - -/* -** EXTENSION API FUNCTIONS -** -** xUserData(pFts): -** Return a copy of the context pointer the extension function was -** registered with. -** -** xColumnTotalSize(pFts, iCol, pnToken): -** If parameter iCol is less than zero, set output variable *pnToken -** to the total number of tokens in the FTS5 table. Or, if iCol is -** non-negative but less than the number of columns in the table, return -** the total number of tokens in column iCol, considering all rows in -** the FTS5 table. -** -** If parameter iCol is greater than or equal to the number of columns -** in the table, SQLITE_RANGE is returned. Or, if an error occurs (e.g. -** an OOM condition or IO error), an appropriate SQLite error code is -** returned. -** -** xColumnCount(pFts): -** Return the number of columns in the table. -** -** xColumnSize(pFts, iCol, pnToken): -** If parameter iCol is less than zero, set output variable *pnToken -** to the total number of tokens in the current row. Or, if iCol is -** non-negative but less than the number of columns in the table, set -** *pnToken to the number of tokens in column iCol of the current row. -** -** If parameter iCol is greater than or equal to the number of columns -** in the table, SQLITE_RANGE is returned. Or, if an error occurs (e.g. -** an OOM condition or IO error), an appropriate SQLite error code is -** returned. -** -** This function may be quite inefficient if used with an FTS5 table -** created with the "columnsize=0" option. -** -** xColumnText: -** This function attempts to retrieve the text of column iCol of the -** current document. If successful, (*pz) is set to point to a buffer -** containing the text in utf-8 encoding, (*pn) is set to the size in bytes -** (not characters) of the buffer and SQLITE_OK is returned. Otherwise, -** if an error occurs, an SQLite error code is returned and the final values -** of (*pz) and (*pn) are undefined. -** -** xPhraseCount: -** Returns the number of phrases in the current query expression. -** -** xPhraseSize: -** Returns the number of tokens in phrase iPhrase of the query. Phrases -** are numbered starting from zero. -** -** xInstCount: -** Set *pnInst to the total number of occurrences of all phrases within -** the query within the current row. Return SQLITE_OK if successful, or -** an error code (i.e. SQLITE_NOMEM) if an error occurs. -** -** This API can be quite slow if used with an FTS5 table created with the -** "detail=none" or "detail=column" option. If the FTS5 table is created -** with either "detail=none" or "detail=column" and "content=" option -** (i.e. if it is a contentless table), then this API always returns 0. -** -** xInst: -** Query for the details of phrase match iIdx within the current row. -** Phrase matches are numbered starting from zero, so the iIdx argument -** should be greater than or equal to zero and smaller than the value -** output by xInstCount(). -** -** Usually, output parameter *piPhrase is set to the phrase number, *piCol -** to the column in which it occurs and *piOff the token offset of the -** first token of the phrase. The exception is if the table was created -** with the offsets=0 option specified. In this case *piOff is always -** set to -1. -** -** Returns SQLITE_OK if successful, or an error code (i.e. SQLITE_NOMEM) -** if an error occurs. -** -** This API can be quite slow if used with an FTS5 table created with the -** "detail=none" or "detail=column" option. -** -** xRowid: -** Returns the rowid of the current row. -** -** xTokenize: -** Tokenize text using the tokenizer belonging to the FTS5 table. -** -** xQueryPhrase(pFts5, iPhrase, pUserData, xCallback): -** This API function is used to query the FTS table for phrase iPhrase -** of the current query. Specifically, a query equivalent to: -** -** ... FROM ftstable WHERE ftstable MATCH $p ORDER BY rowid -** -** with $p set to a phrase equivalent to the phrase iPhrase of the -** current query is executed. Any column filter that applies to -** phrase iPhrase of the current query is included in $p. For each -** row visited, the callback function passed as the fourth argument -** is invoked. The context and API objects passed to the callback -** function may be used to access the properties of each matched row. -** Invoking Api.xUserData() returns a copy of the pointer passed as -** the third argument to pUserData. -** -** If the callback function returns any value other than SQLITE_OK, the -** query is abandoned and the xQueryPhrase function returns immediately. -** If the returned value is SQLITE_DONE, xQueryPhrase returns SQLITE_OK. -** Otherwise, the error code is propagated upwards. -** -** If the query runs to completion without incident, SQLITE_OK is returned. -** Or, if some error occurs before the query completes or is aborted by -** the callback, an SQLite error code is returned. -** -** -** xSetAuxdata(pFts5, pAux, xDelete) -** -** Save the pointer passed as the second argument as the extension functions -** "auxiliary data". The pointer may then be retrieved by the current or any -** future invocation of the same fts5 extension function made as part of -** of the same MATCH query using the xGetAuxdata() API. -** -** Each extension function is allocated a single auxiliary data slot for -** each FTS query (MATCH expression). If the extension function is invoked -** more than once for a single FTS query, then all invocations share a -** single auxiliary data context. -** -** If there is already an auxiliary data pointer when this function is -** invoked, then it is replaced by the new pointer. If an xDelete callback -** was specified along with the original pointer, it is invoked at this -** point. -** -** The xDelete callback, if one is specified, is also invoked on the -** auxiliary data pointer after the FTS5 query has finished. -** -** If an error (e.g. an OOM condition) occurs within this function, an -** the auxiliary data is set to NULL and an error code returned. If the -** xDelete parameter was not NULL, it is invoked on the auxiliary data -** pointer before returning. -** -** -** xGetAuxdata(pFts5, bClear) -** -** Returns the current auxiliary data pointer for the fts5 extension -** function. See the xSetAuxdata() method for details. -** -** If the bClear argument is non-zero, then the auxiliary data is cleared -** (set to NULL) before this function returns. In this case the xDelete, -** if any, is not invoked. -** -** -** xRowCount(pFts5, pnRow) -** -** This function is used to retrieve the total number of rows in the table. -** In other words, the same value that would be returned by: -** -** SELECT count(*) FROM ftstable; -** -** xPhraseFirst() -** This function is used, along with type Fts5PhraseIter and the xPhraseNext -** method, to iterate through all instances of a single query phrase within -** the current row. This is the same information as is accessible via the -** xInstCount/xInst APIs. While the xInstCount/xInst APIs are more convenient -** to use, this API may be faster under some circumstances. To iterate -** through instances of phrase iPhrase, use the following code: -** -** Fts5PhraseIter iter; -** int iCol, iOff; -** for(pApi->xPhraseFirst(pFts, iPhrase, &iter, &iCol, &iOff); -** iCol>=0; -** pApi->xPhraseNext(pFts, &iter, &iCol, &iOff) -** ){ -** // An instance of phrase iPhrase at offset iOff of column iCol -** } -** -** The Fts5PhraseIter structure is defined above. Applications should not -** modify this structure directly - it should only be used as shown above -** with the xPhraseFirst() and xPhraseNext() API methods (and by -** xPhraseFirstColumn() and xPhraseNextColumn() as illustrated below). -** -** This API can be quite slow if used with an FTS5 table created with the -** "detail=none" or "detail=column" option. If the FTS5 table is created -** with either "detail=none" or "detail=column" and "content=" option -** (i.e. if it is a contentless table), then this API always iterates -** through an empty set (all calls to xPhraseFirst() set iCol to -1). -** -** xPhraseNext() -** See xPhraseFirst above. -** -** xPhraseFirstColumn() -** This function and xPhraseNextColumn() are similar to the xPhraseFirst() -** and xPhraseNext() APIs described above. The difference is that instead -** of iterating through all instances of a phrase in the current row, these -** APIs are used to iterate through the set of columns in the current row -** that contain one or more instances of a specified phrase. For example: -** -** Fts5PhraseIter iter; -** int iCol; -** for(pApi->xPhraseFirstColumn(pFts, iPhrase, &iter, &iCol); -** iCol>=0; -** pApi->xPhraseNextColumn(pFts, &iter, &iCol) -** ){ -** // Column iCol contains at least one instance of phrase iPhrase -** } -** -** This API can be quite slow if used with an FTS5 table created with the -** "detail=none" option. If the FTS5 table is created with either -** "detail=none" "content=" option (i.e. if it is a contentless table), -** then this API always iterates through an empty set (all calls to -** xPhraseFirstColumn() set iCol to -1). -** -** The information accessed using this API and its companion -** xPhraseFirstColumn() may also be obtained using xPhraseFirst/xPhraseNext -** (or xInst/xInstCount). The chief advantage of this API is that it is -** significantly more efficient than those alternatives when used with -** "detail=column" tables. -** -** xPhraseNextColumn() -** See xPhraseFirstColumn above. -*/ -struct Fts5ExtensionApi -{ - int iVersion; /* Currently always set to 3 */ - - void* function(Fts5Context*) xUserData; - - int function(Fts5Context*) xColumnCount; - int function(Fts5Context*, sqlite3_int64* pnRow) xRowCount; - int function(Fts5Context*, int iCol, sqlite3_int64* pnToken) xColumnTotalSize; - - /* Text to tokenize */ - /* Context passed to xToken() */ - /* Callback */ - int function(Fts5Context*, const(char)* pText, int nText, void* pCtx, int function(void*, int, const(char)*, int, int, int) xToken) xTokenize; - - int function(Fts5Context*) xPhraseCount; - int function(Fts5Context*, int iPhrase) xPhraseSize; - - int function(Fts5Context*, int* pnInst) xInstCount; - int function(Fts5Context*, int iIdx, int* piPhrase, int* piCol, int* piOff) xInst; - - sqlite3_int64 function(Fts5Context*) xRowid; - int function(Fts5Context*, int iCol, const(char*)* pz, int* pn) xColumnText; - int function(Fts5Context*, int iCol, int* pnToken) xColumnSize; - - int function(Fts5Context*, int iPhrase, void* pUserData, int function(const(Fts5ExtensionApi)*, Fts5Context*, void*)) xQueryPhrase; - int function(Fts5Context*, void* pAux, void function(void*) xDelete) xSetAuxdata; - void* function(Fts5Context*, int bClear) xGetAuxdata; - - int function(Fts5Context*, int iPhrase, Fts5PhraseIter*, int*, int*) xPhraseFirst; - void function(Fts5Context*, Fts5PhraseIter*, int* piCol, int* piOff) xPhraseNext; - - int function(Fts5Context*, int iPhrase, Fts5PhraseIter*, int*) xPhraseFirstColumn; - void function(Fts5Context*, Fts5PhraseIter*, int* piCol) xPhraseNextColumn; -} - -/* -** CUSTOM AUXILIARY FUNCTIONS -*************************************************************************/ - -/************************************************************************* -** CUSTOM TOKENIZERS -** -** Applications may also register custom tokenizer types. A tokenizer -** is registered by providing fts5 with a populated instance of the -** following structure. All structure methods must be defined, setting -** any member of the fts5_tokenizer struct to NULL leads to undefined -** behaviour. The structure methods are expected to function as follows: -** -** xCreate: -** This function is used to allocate and initialize a tokenizer instance. -** A tokenizer instance is required to actually tokenize text. -** -** The first argument passed to this function is a copy of the (void*) -** pointer provided by the application when the fts5_tokenizer object -** was registered with FTS5 (the third argument to xCreateTokenizer()). -** The second and third arguments are an array of nul-terminated strings -** containing the tokenizer arguments, if any, specified following the -** tokenizer name as part of the CREATE VIRTUAL TABLE statement used -** to create the FTS5 table. -** -** The final argument is an output variable. If successful, (*ppOut) -** should be set to point to the new tokenizer handle and SQLITE_OK -** returned. If an error occurs, some value other than SQLITE_OK should -** be returned. In this case, fts5 assumes that the final value of *ppOut -** is undefined. -** -** xDelete: -** This function is invoked to delete a tokenizer handle previously -** allocated using xCreate(). Fts5 guarantees that this function will -** be invoked exactly once for each successful call to xCreate(). -** -** xTokenize: -** This function is expected to tokenize the nText byte string indicated -** by argument pText. pText may or may not be nul-terminated. The first -** argument passed to this function is a pointer to an Fts5Tokenizer object -** returned by an earlier call to xCreate(). -** -** The second argument indicates the reason that FTS5 is requesting -** tokenization of the supplied text. This is always one of the following -** four values: -** -** <ul><li> <b>FTS5_TOKENIZE_DOCUMENT</b> - A document is being inserted into -** or removed from the FTS table. The tokenizer is being invoked to -** determine the set of tokens to add to (or delete from) the -** FTS index. -** -** <li> <b>FTS5_TOKENIZE_QUERY</b> - A MATCH query is being executed -** against the FTS index. The tokenizer is being called to tokenize -** a bareword or quoted string specified as part of the query. -** -** <li> <b>(FTS5_TOKENIZE_QUERY | FTS5_TOKENIZE_PREFIX)</b> - Same as -** FTS5_TOKENIZE_QUERY, except that the bareword or quoted string is -** followed by a "*" character, indicating that the last token -** returned by the tokenizer will be treated as a token prefix. -** -** <li> <b>FTS5_TOKENIZE_AUX</b> - The tokenizer is being invoked to -** satisfy an fts5_api.xTokenize() request made by an auxiliary -** function. Or an fts5_api.xColumnSize() request made by the same -** on a columnsize=0 database. -** </ul> -** -** For each token in the input string, the supplied callback xToken() must -** be invoked. The first argument to it should be a copy of the pointer -** passed as the second argument to xTokenize(). The third and fourth -** arguments are a pointer to a buffer containing the token text, and the -** size of the token in bytes. The 4th and 5th arguments are the byte offsets -** of the first byte of and first byte immediately following the text from -** which the token is derived within the input. -** -** The second argument passed to the xToken() callback ("tflags") should -** normally be set to 0. The exception is if the tokenizer supports -** synonyms. In this case see the discussion below for details. -** -** FTS5 assumes the xToken() callback is invoked for each token in the -** order that they occur within the input text. -** -** If an xToken() callback returns any value other than SQLITE_OK, then -** the tokenization should be abandoned and the xTokenize() method should -** immediately return a copy of the xToken() return value. Or, if the -** input buffer is exhausted, xTokenize() should return SQLITE_OK. Finally, -** if an error occurs with the xTokenize() implementation itself, it -** may abandon the tokenization and return any error code other than -** SQLITE_OK or SQLITE_DONE. -** -** SYNONYM SUPPORT -** -** Custom tokenizers may also support synonyms. Consider a case in which a -** user wishes to query for a phrase such as "first place". Using the -** built-in tokenizers, the FTS5 query 'first + place' will match instances -** of "first place" within the document set, but not alternative forms -** such as "1st place". In some applications, it would be better to match -** all instances of "first place" or "1st place" regardless of which form -** the user specified in the MATCH query text. -** -** There are several ways to approach this in FTS5: -** -** <ol><li> By mapping all synonyms to a single token. In this case, the -** In the above example, this means that the tokenizer returns the -** same token for inputs "first" and "1st". Say that token is in -** fact "first", so that when the user inserts the document "I won -** 1st place" entries are added to the index for tokens "i", "won", -** "first" and "place". If the user then queries for '1st + place', -** the tokenizer substitutes "first" for "1st" and the query works -** as expected. -** -** <li> By adding multiple synonyms for a single term to the FTS index. -** In this case, when tokenizing query text, the tokenizer may -** provide multiple synonyms for a single term within the document. -** FTS5 then queries the index for each synonym individually. For -** example, faced with the query: -** -** <codeblock> -** ... MATCH 'first place'</codeblock> -** -** the tokenizer offers both "1st" and "first" as synonyms for the -** first token in the MATCH query and FTS5 effectively runs a query -** similar to: -** -** <codeblock> -** ... MATCH '(first OR 1st) place'</codeblock> -** -** except that, for the purposes of auxiliary functions, the query -** still appears to contain just two phrases - "(first OR 1st)" -** being treated as a single phrase. -** -** <li> By adding multiple synonyms for a single term to the FTS index. -** Using this method, when tokenizing document text, the tokenizer -** provides multiple synonyms for each token. So that when a -** document such as "I won first place" is tokenized, entries are -** added to the FTS index for "i", "won", "first", "1st" and -** "place". -** -** This way, even if the tokenizer does not provide synonyms -** when tokenizing query text (it should not - to do would be -** inefficient), it doesn't matter if the user queries for -** 'first + place' or '1st + place', as there are entries in the -** FTS index corresponding to both forms of the first token. -** </ol> -** -** Whether it is parsing document or query text, any call to xToken that -** specifies a <i>tflags</i> argument with the FTS5_TOKEN_COLOCATED bit -** is considered to supply a synonym for the previous token. For example, -** when parsing the document "I won first place", a tokenizer that supports -** synonyms would call xToken() 5 times, as follows: -** -** <codeblock> -** xToken(pCtx, 0, "i", 1, 0, 1); -** xToken(pCtx, 0, "won", 3, 2, 5); -** xToken(pCtx, 0, "first", 5, 6, 11); -** xToken(pCtx, FTS5_TOKEN_COLOCATED, "1st", 3, 6, 11); -** xToken(pCtx, 0, "place", 5, 12, 17); -**</codeblock> -** -** It is an error to specify the FTS5_TOKEN_COLOCATED flag the first time -** xToken() is called. Multiple synonyms may be specified for a single token -** by making multiple calls to xToken(FTS5_TOKEN_COLOCATED) in sequence. -** There is no limit to the number of synonyms that may be provided for a -** single token. -** -** In many cases, method (1) above is the best approach. It does not add -** extra data to the FTS index or require FTS5 to query for multiple terms, -** so it is efficient in terms of disk space and query speed. However, it -** does not support prefix queries very well. If, as suggested above, the -** token "first" is substituted for "1st" by the tokenizer, then the query: -** -** <codeblock> -** ... MATCH '1s*'</codeblock> -** -** will not match documents that contain the token "1st" (as the tokenizer -** will probably not map "1s" to any prefix of "first"). -** -** For full prefix support, method (3) may be preferred. In this case, -** because the index contains entries for both "first" and "1st", prefix -** queries such as 'fi*' or '1s*' will match correctly. However, because -** extra entries are added to the FTS index, this method uses more space -** within the database. -** -** Method (2) offers a midpoint between (1) and (3). Using this method, -** a query such as '1s*' will match documents that contain the literal -** token "1st", but not "first" (assuming the tokenizer is not able to -** provide synonyms for prefixes). However, a non-prefix query like '1st' -** will match against "1st" and "first". This method does not require -** extra disk space, as no extra entries are added to the FTS index. -** On the other hand, it may require more CPU cycles to run MATCH queries, -** as separate queries of the FTS index are required for each synonym. -** -** When using methods (2) or (3), it is important that the tokenizer only -** provide synonyms when tokenizing document text (method (2)) or query -** text (method (3)), not both. Doing so will not cause any errors, but is -** inefficient. -*/ -struct Fts5Tokenizer; - -struct fts5_tokenizer -{ - int function(void*, const(char*)* azArg, int nArg, Fts5Tokenizer** ppOut) xCreate; - void function(Fts5Tokenizer*) xDelete; - - /* Mask of FTS5_TOKENIZE_* flags */ - - /* Copy of 2nd argument to xTokenize() */ - /* Mask of FTS5_TOKEN_* flags */ - /* Pointer to buffer containing token */ - /* Size of token in bytes */ - /* Byte offset of token within input text */ - /* Byte offset of end of token within input text */ - int function(Fts5Tokenizer*, void* pCtx, int flags, const(char)* pText, int nText, int function(void* pCtx, int tflags, const(char)* pToken, int nToken, int iStart, int iEnd) xToken) xTokenize; -} - -/* Flags that may be passed as the third argument to xTokenize() */ -enum FTS5_TOKENIZE_QUERY = 0x0001; -enum FTS5_TOKENIZE_PREFIX = 0x0002; -enum FTS5_TOKENIZE_DOCUMENT = 0x0004; -enum FTS5_TOKENIZE_AUX = 0x0008; - -/* Flags that may be passed by the tokenizer implementation back to FTS5 -** as the third argument to the supplied xToken callback. */ -enum FTS5_TOKEN_COLOCATED = 0x0001; /* Same position as prev. token */ - -/* -** END OF CUSTOM TOKENIZERS -*************************************************************************/ - -/************************************************************************* -** FTS5 EXTENSION REGISTRATION API -*/ -struct fts5_api -{ - int iVersion; /* Currently always set to 2 */ - - /* Create a new tokenizer */ - int function(fts5_api* pApi, const(char)* zName, void* pContext, fts5_tokenizer* pTokenizer, void function(void*) xDestroy) xCreateTokenizer; - - /* Find an existing tokenizer */ - int function(fts5_api* pApi, const(char)* zName, void** ppContext, fts5_tokenizer* pTokenizer) xFindTokenizer; - - /* Create a new auxiliary function */ - int function(fts5_api* pApi, const(char)* zName, void* pContext, fts5_extension_function xFunction, void function(void*) xDestroy) xCreateFunction; -} - -/* -** END OF REGISTRATION API -*************************************************************************/ - -/* end of the 'extern "C"' block */ - -/* _FTS5_H */ - -/******** End of fts5.h *********/ |